[Intel-gfx] [PATCH 05/15] drm/i915: Add helpers to select correct ccs/aux planes
Matt Roper
matthew.d.roper at intel.com
Thu Dec 19 21:04:33 UTC 2019
On Wed, Dec 18, 2019 at 06:10:55PM +0200, Imre Deak wrote:
> Using helpers instead of open coding this to select a CCS plane for a
> main plane makes the code cleaner and less error-prone when the location
> of CCS plane can be different based on the format (packed vs. YUV
> semiplanar). The same applies to selecting an AUX plane which can be a
> UV plane (for an uncompressed YUV semiplanar format), or a CCS plane.
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
Looking at this makes me wonder if some of the aux stuff that we're
doing for YUV in skl_check_main_surface is actually necessary for gen11+
now that we have separate planes rather than an AUX surface in the same
plane.
But none of the logic should be impacted by your changes here so,
Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 63 ++++++++++++++++----
> 1 file changed, 50 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4b8b44c39724..6bda397ae677 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1933,6 +1933,40 @@ static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
> return IS_GEN(dev_priv, 2) ? 2048 : 4096;
> }
>
> +static bool is_ccs_plane(const struct drm_framebuffer *fb, int plane)
> +{
> + if (!is_ccs_modifier(fb->modifier))
> + return false;
> +
> + return plane >= fb->format->num_planes / 2;
> +}
> +
> +static bool is_aux_plane(const struct drm_framebuffer *fb, int plane)
> +{
> + if (is_ccs_modifier(fb->modifier))
> + return is_ccs_plane(fb, plane);
> +
> + return plane == 1;
> +}
> +
> +static int main_to_ccs_plane(const struct drm_framebuffer *fb, int main_plane)
> +{
> + WARN_ON(!is_ccs_modifier(fb->modifier) ||
> + (main_plane && main_plane >= fb->format->num_planes / 2));
> +
> + return fb->format->num_planes / 2 + main_plane;
> +}
> +
> +/* Return either the main plane's CCS or - if not a CCS FB - UV plane */
> +static int
> +intel_main_to_aux_plane(const struct drm_framebuffer *fb, int main_plane)
> +{
> + if (is_ccs_modifier(fb->modifier))
> + return main_to_ccs_plane(fb, main_plane);
> +
> + return 1;
> +}
> +
> static unsigned int
> intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
> {
> @@ -1948,7 +1982,7 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
> else
> return 512;
> case I915_FORMAT_MOD_Y_TILED_CCS:
> - if (color_plane == 1)
> + if (is_ccs_plane(fb, color_plane))
> return 128;
> /* fall through */
> case I915_FORMAT_MOD_Y_TILED:
> @@ -1957,7 +1991,7 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
> else
> return 512;
> case I915_FORMAT_MOD_Yf_TILED_CCS:
> - if (color_plane == 1)
> + if (is_ccs_plane(fb, color_plane))
> return 128;
> /* fall through */
> case I915_FORMAT_MOD_Yf_TILED:
> @@ -2074,7 +2108,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
> struct drm_i915_private *dev_priv = to_i915(fb->dev);
>
> /* AUX_DIST needs only 4K alignment */
> - if (color_plane == 1)
> + if (is_aux_plane(fb, color_plane))
> return 4096;
>
> switch (fb->modifier) {
> @@ -3457,10 +3491,11 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state
> const struct drm_framebuffer *fb = plane_state->hw.fb;
> int hsub = fb->format->hsub;
> int vsub = fb->format->vsub;
> - int aux_x = plane_state->color_plane[1].x;
> - int aux_y = plane_state->color_plane[1].y;
> - u32 aux_offset = plane_state->color_plane[1].offset;
> - u32 alignment = intel_surf_alignment(fb, 1);
> + int ccs_plane = main_to_ccs_plane(fb, 0);
> + int aux_x = plane_state->color_plane[ccs_plane].x;
> + int aux_y = plane_state->color_plane[ccs_plane].y;
> + u32 aux_offset = plane_state->color_plane[ccs_plane].offset;
> + u32 alignment = intel_surf_alignment(fb, ccs_plane);
>
> while (aux_offset >= main_offset && aux_y <= main_y) {
> int x, y;
> @@ -3473,7 +3508,7 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state
>
> x = aux_x / hsub;
> y = aux_y / vsub;
> - aux_offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 1,
> + aux_offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, ccs_plane,
> aux_offset, aux_offset - alignment);
> aux_x = x * hsub + aux_x % hsub;
> aux_y = y * vsub + aux_y % vsub;
> @@ -3482,9 +3517,9 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state
> if (aux_x != main_x || aux_y != main_y)
> return false;
>
> - plane_state->color_plane[1].offset = aux_offset;
> - plane_state->color_plane[1].x = aux_x;
> - plane_state->color_plane[1].y = aux_y;
> + plane_state->color_plane[ccs_plane].offset = aux_offset;
> + plane_state->color_plane[ccs_plane].x = aux_x;
> + plane_state->color_plane[ccs_plane].y = aux_y;
>
> return true;
> }
> @@ -3500,7 +3535,8 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> int h = drm_rect_height(&plane_state->uapi.src) >> 16;
> int max_width;
> int max_height;
> - u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
> + int aux_plane = intel_main_to_aux_plane(fb, 0);
> + u32 alignment, offset, aux_offset = plane_state->color_plane[aux_plane].offset;
>
> if (INTEL_GEN(dev_priv) >= 11)
> max_width = icl_max_plane_width(fb, 0, rotation);
> @@ -3566,7 +3602,8 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
> offset, offset - alignment);
> }
>
> - if (x != plane_state->color_plane[1].x || y != plane_state->color_plane[1].y) {
> + if (x != plane_state->color_plane[aux_plane].x ||
> + y != plane_state->color_plane[aux_plane].y) {
> DRM_DEBUG_KMS("Unable to find suitable display surface offset due to CCS\n");
> return -EINVAL;
> }
> --
> 2.22.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
More information about the Intel-gfx
mailing list