[Intel-gfx] [PATCH v2 1/3] drm/i915/dp: Make sure all tiled connectors get added to the state with full modeset
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Dec 20 13:17:27 UTC 2019
On Thu, Dec 19, 2019 at 01:51:15PM -0800, Manasi Navare wrote:
> In case of tiled displays, all the tiles are linke dto each other
> for transcoder port sync. So in intel_atomic_check() we need to make
> sure that we add all the tiles to the modeset and if one of the
> tiles needs a full modeset then mark all other tiles for a full modeset.
>
> v2:
> * Change crtc_state scope, remove tile_grp_id (Ville)
> * Use intel_connector_needs_modeset() (Ville)
> * Add modeset_synced_crtcs (Ville)
> * Make sure synced crtcs are forced full modeset
> after fastset check (Ville)
>
> Suggested-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Cc: Matt Roper <matthew.d.roper at intel.com>
> Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 143 +++++++++++++++++--
> 1 file changed, 131 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index a3f9430493ae..00608d8cef50 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -13910,18 +13910,6 @@ static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_sta
> new_crtc_state->uapi.mode_changed = false;
> new_crtc_state->update_pipe = true;
>
> - /*
> - * If we're not doing the full modeset we want to
> - * keep the current M/N values as they may be
> - * sufficiently different to the computed values
> - * to cause problems.
> - *
> - * FIXME: should really copy more fuzzy state here
> - */
> - new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n;
> - new_crtc_state->dp_m_n = old_crtc_state->dp_m_n;
> - new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2;
> - new_crtc_state->has_drrs = old_crtc_state->has_drrs;
> }
The check vs. copy should really be a separate patch. Otherwise we risk
having to revert the whole thing if something goes wrong.
>
> static int intel_crtc_add_planes_to_state(struct intel_atomic_state *state,
> @@ -14032,6 +14020,105 @@ static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
> return 0;
> }
>
> +static void
> +intel_dp_modeset_synced_crtcs(struct intel_atomic_state *state)
I would remove "dp" from the names of all these functions. The fact
that we only enable port sync on DP outputs is just an implementation
detail we don't have/want to care about in higher level code like this.
> +{
> + struct intel_crtc_state *new_crtc_state;
> + struct intel_crtc *crtc;
> + int i;
> +
> + for_each_new_intel_crtc_in_state(state, crtc,
> + new_crtc_state, i) {
> + if (is_trans_port_sync_mode(new_crtc_state)) {
> + new_crtc_state->uapi.mode_changed = true;
> + new_crtc_state->update_pipe = false;
> + }
> + }
> +}
> +
> +static void
> +intel_dp_atomic_check_synced_crtcs(struct intel_atomic_state *state)
> +{
> + struct intel_crtc_state *new_crtc_state;
> + struct intel_crtc *crtc;
> + int i;
> +
> + for_each_new_intel_crtc_in_state(state, crtc,
> + new_crtc_state, i) {
> + if (!is_trans_port_sync_mode(new_crtc_state) ||
> + !needs_modeset(new_crtc_state))
> + continue;
> +
> + intel_dp_modeset_synced_crtcs(state);
> + }
This is not sufficient for the pre-compute_config() check. The point is
that we don't yet necessarily have the synced crtcs in the atomic state
so we have to add them. Please have a look in my branch for what I mean
exactly.
For the check between the fastset check vs. copy this here should work.
> +}
> +
> +static int
> +intel_dp_modeset_all_tiles(struct intel_atomic_state *state, int tile_grp_id)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + struct drm_connector *connector;
> + struct drm_connector_list_iter conn_list_iter;
'conn_iter' is the customary name.
> +
> + drm_connector_list_iter_begin(&dev_priv->drm, &conn_list_iter);
> + drm_for_each_connector_iter(connector, &conn_list_iter) {
> + struct drm_connector_state *conn_iter_state;
'conn_state'
> + struct drm_crtc_state *crtc_state;
> +
> + if (!(connector->has_tile &&
> + connector->tile_group->id == tile_grp_id))
> + continue;
or maybe !has_tile || tile_grrp != tile_grp
I find that form a bit easier on the eyes. But either will work.
> + conn_iter_state = drm_atomic_get_connector_state(&state->base,
> + connector);
> + if (IS_ERR(conn_iter_state)) {
> + drm_connector_list_iter_end(&conn_list_iter);
> + return PTR_ERR(conn_iter_state);
nit: could just do 'ret = PTR_ERR(); break;'
and 'int ret=0;' + 'return ret' at the fars ends of the function.
> + }
> +
> + if (!conn_iter_state->crtc)
> + continue;
> +
> + crtc_state = drm_atomic_get_crtc_state(&state->base,
> + conn_iter_state->crtc);
> + if (IS_ERR(crtc_state)) {
> + drm_connector_list_iter_end(&conn_list_iter);
> + return PTR_ERR(conn_iter_state);
> + }
> + crtc_state->mode_changed = true;
Missing drm_atomic_add_affected_planes(). We also need that in the
pre-compute_config() check_synced_crtcs().
> + }
> + drm_connector_list_iter_end(&conn_list_iter);
> +
> + return 0;
> +}
> +
> +static int
> +intel_dp_atomic_check_tiled_conns(struct intel_atomic_state *state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> + struct drm_connector *connector;
> + struct drm_connector_state *old_conn_state, *new_conn_state;
> + int i, ret;
> +
> + if (INTEL_GEN(dev_priv) < 11)
> + return 0;
> +
> + /* Is tiled, mark all other tiled CRTCs as needing a modeset */
> + for_each_oldnew_connector_in_state(&state->base, connector,
> + old_conn_state, new_conn_state, i) {
> + if (!connector->has_tile)
> + continue;
> + if (!intel_connector_needs_modeset(state, old_conn_state,
> + new_conn_state))
> + continue;
> +
> + ret = intel_dp_modeset_all_tiles(state, connector->tile_group->id);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /**
> * intel_atomic_check - validate state object
> * @dev: drm device
> @@ -14059,6 +14146,12 @@ static int intel_atomic_check(struct drm_device *dev,
> if (ret)
> goto fail;
>
> + ret = intel_dp_atomic_check_tiled_conns(state);
> + if (ret)
> + goto fail;
> +
> + intel_dp_atomic_check_synced_crtcs(state);
> +
> for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> new_crtc_state, i) {
> if (!needs_modeset(new_crtc_state)) {
> @@ -14089,6 +14182,32 @@ static int intel_atomic_check(struct drm_device *dev,
> any_ms = true;
> }
>
> + /*
> + * In case of port synced crtcs, if one of the synced crtcs
> + * needs a full modeset, all other synced crtcs should be
> + * forced a full modeset.
> + */
> + intel_dp_atomic_check_synced_crtcs(state);
> +
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> + new_crtc_state, i) {
> + if (needs_modeset(new_crtc_state))
> + continue;
> +
> + /*
> + * If we're not doing the full modeset we want to
> + * keep the current M/N values as they may be
> + * sufficiently different to the computed values
> + * to cause problems.
> + *
> + * FIXME: should really copy more fuzzy state here
> + */
> + new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n;
> + new_crtc_state->dp_m_n = old_crtc_state->dp_m_n;
> + new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2;
> + new_crtc_state->has_drrs = old_crtc_state->has_drrs;
Same comment I gave in Jose's patch: Pls keep this in a separate
function. My branch has an example.
> + }
> +
> if (any_ms && !check_digital_port_conflicts(state)) {
> DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
> ret = EINVAL;
> --
> 2.19.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list