[Intel-gfx] [PATCH v10 3/4] drm/i915: Manipulate DBuf slices properly
Stanislav Lisovskiy
stanislav.lisovskiy at intel.com
Mon Dec 23 15:45:21 UTC 2019
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 23 ++---
.../drm/i915/display/intel_display_power.c | 94 +++++++++----------
.../drm/i915/display/intel_display_power.h | 4 +
.../drm/i915/display/intel_display_types.h | 2 +-
drivers/gpu/drm/i915/i915_drv.h | 2 +-
drivers/gpu/drm/i915/i915_pci.c | 5 +-
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_device_info.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 51 +++-------
drivers/gpu/drm/i915/intel_pm.h | 2 +-
10 files changed, 83 insertions(+), 102 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index bba7897d05d8..757e90ccbab5 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13332,12 +13332,12 @@ static void verify_wm_state(struct intel_crtc *crtc,
skl_pipe_ddb_get_hw_state(crtc, hw->ddb_y, hw->ddb_uv);
- hw_enabled_slices = intel_enabled_dbuf_slices_num(dev_priv);
+ hw_enabled_slices = intel_enabled_dbuf_slices_mask(dev_priv);
if (INTEL_GEN(dev_priv) >= 11 &&
- hw_enabled_slices != dev_priv->enabled_dbuf_slices_num)
- DRM_ERROR("mismatch in DBUF Slices (expected %u, got %u)\n",
- dev_priv->enabled_dbuf_slices_num,
+ hw_enabled_slices != dev_priv->enabled_dbuf_slices_mask)
+ DRM_ERROR("mismatch in DBUF Slices (expected 0x%x, got 0x%x)\n",
+ dev_priv->enabled_dbuf_slices_mask,
hw_enabled_slices);
/* planes */
@@ -14518,22 +14518,23 @@ static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
static void icl_dbuf_slice_pre_update(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
- u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
- u8 required_slices = state->enabled_dbuf_slices_num;
+ u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_mask;
+ u8 required_slices = state->enabled_dbuf_slices_mask;
+ u8 slices_union = hw_enabled_slices | required_slices;
/* If 2nd DBuf slice required, enable it here */
- if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
- icl_dbuf_slices_update(dev_priv, required_slices);
+ if (INTEL_GEN(dev_priv) >= 11 && slices_union != hw_enabled_slices)
+ icl_dbuf_slices_update(dev_priv, slices_union);
}
static void icl_dbuf_slice_post_update(struct intel_atomic_state *state)
{
struct drm_i915_private *dev_priv = to_i915(state->base.dev);
- u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
- u8 required_slices = state->enabled_dbuf_slices_num;
+ u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_mask;
+ u8 required_slices = state->enabled_dbuf_slices_mask;
/* If 2nd DBuf slice is no more required disable it */
- if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
+ if (INTEL_GEN(dev_priv) >= 11 && required_slices != hw_enabled_slices)
icl_dbuf_slices_update(dev_priv, required_slices);
}
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index d8058cc61e45..b30738d2d46c 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -15,6 +15,7 @@
#include "intel_display_types.h"
#include "intel_dpio_phy.h"
#include "intel_hotplug.h"
+#include "intel_pm.h"
#include "intel_sideband.h"
#include "intel_tc.h"
#include "intel_vga.h"
@@ -1031,8 +1032,19 @@ static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
u32 tmp = I915_READ(DBUF_CTL);
WARN((tmp & (DBUF_POWER_STATE | DBUF_POWER_REQUEST)) !=
- (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
- "Unexpected DBuf power power state (0x%08x)\n", tmp);
+ (DBUF_POWER_STATE | DBUF_POWER_REQUEST),
+ "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n",
+ tmp, (DBUF_POWER_STATE | DBUF_POWER_REQUEST));
+}
+
+static void gen11_assert_dbuf_status(struct drm_i915_private *dev_priv)
+{
+ u8 enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv);
+
+ WARN(enabled_dbuf_slices != dev_priv->enabled_dbuf_slices_mask,
+ "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n",
+ enabled_dbuf_slices,
+ dev_priv->enabled_dbuf_slices_mask);
}
static void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
@@ -1050,7 +1062,11 @@ static void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
/* Can't read out voltage_level so can't use intel_cdclk_changed() */
WARN_ON(intel_cdclk_needs_modeset(&dev_priv->cdclk.hw, &cdclk_state));
- gen9_assert_dbuf_enabled(dev_priv);
+ /* Starting from ICL, DMC restores the last state, being set */
+ if (INTEL_GEN(dev_priv) >= 11)
+ gen11_assert_dbuf_status(dev_priv);
+ else
+ gen9_assert_dbuf_enabled(dev_priv);
if (IS_GEN9_LP(dev_priv))
bxt_verify_ddi_phy_power_wells(dev_priv);
@@ -4396,72 +4412,48 @@ static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
intel_dbuf_slice_set(dev_priv, DBUF_CTL, false);
}
-static u8 intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
+int intel_dbuf_max_slices(struct drm_i915_private *dev_priv)
{
- if (INTEL_GEN(dev_priv) < 11)
- return 1;
- return 2;
+ return INTEL_INFO(dev_priv)->num_supported_dbuf_slices;
}
void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
u8 req_slices)
{
- const u8 hw_enabled_slices = dev_priv->enabled_dbuf_slices_num;
- bool ret;
+ int i;
+ int max_slices = intel_dbuf_max_slices(dev_priv);
- if (req_slices > intel_dbuf_max_slices(dev_priv)) {
- DRM_ERROR("Invalid number of dbuf slices requested\n");
- return;
- }
+ WARN(hweight8(req_slices) > max_slices,
+ "Invalid number of dbuf slices requested\n");
- if (req_slices == hw_enabled_slices || req_slices == 0)
- return;
+ DRM_DEBUG_KMS("Updating dbuf slices to 0x%x\n", req_slices);
- if (req_slices > hw_enabled_slices)
- ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, true);
- else
- ret = intel_dbuf_slice_set(dev_priv, DBUF_CTL_S2, false);
+ for (i = 0; i < max_slices; i++) {
+ intel_dbuf_slice_set(dev_priv,
+ DBUF_CTL_S(BIT(i)),
+ req_slices & BIT(i));
+ }
- if (ret)
- dev_priv->enabled_dbuf_slices_num = req_slices;
+ dev_priv->enabled_dbuf_slices_mask = req_slices;
}
static void icl_dbuf_enable(struct drm_i915_private *dev_priv)
{
- I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) | DBUF_POWER_REQUEST);
- I915_WRITE(DBUF_CTL_S2, I915_READ(DBUF_CTL_S2) | DBUF_POWER_REQUEST);
- POSTING_READ(DBUF_CTL_S2);
-
- udelay(10);
-
- if (!(I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
- !(I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
- DRM_ERROR("DBuf power enable timeout\n");
- else
- /*
- * FIXME: for now pretend that we only have 1 slice, see
- * intel_enabled_dbuf_slices_num().
- */
- dev_priv->enabled_dbuf_slices_num = 1;
+ /*
+ * Just power up 1 slice, we will
+ * figure out later which slices we have and what we need.
+ */
+ dev_priv->enabled_dbuf_slices_mask = DBUF_S1_BIT;
+ icl_dbuf_slices_update(dev_priv, dev_priv->enabled_dbuf_slices_mask);
}
static void icl_dbuf_disable(struct drm_i915_private *dev_priv)
{
- I915_WRITE(DBUF_CTL_S1, I915_READ(DBUF_CTL_S1) & ~DBUF_POWER_REQUEST);
- I915_WRITE(DBUF_CTL_S2, I915_READ(DBUF_CTL_S2) & ~DBUF_POWER_REQUEST);
- POSTING_READ(DBUF_CTL_S2);
-
- udelay(10);
-
- if ((I915_READ(DBUF_CTL_S1) & DBUF_POWER_STATE) ||
- (I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE))
- DRM_ERROR("DBuf power disable timeout!\n");
- else
- /*
- * FIXME: for now pretend that the first slice is always
- * enabled, see intel_enabled_dbuf_slices_num().
- */
- dev_priv->enabled_dbuf_slices_num = 1;
+ /*
+ * Disable all slices
+ */
+ dev_priv->enabled_dbuf_slices_mask = 0;
+ icl_dbuf_slices_update(dev_priv, dev_priv->enabled_dbuf_slices_mask);
}
static void icl_mbus_init(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.h b/drivers/gpu/drm/i915/display/intel_display_power.h
index 1da04f3e0fb3..f52594ecf577 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power.h
@@ -311,8 +311,12 @@ intel_display_power_put_async(struct drm_i915_private *i915,
for ((wf) = intel_display_power_get((i915), (domain)); (wf); \
intel_display_power_put_async((i915), (domain), (wf)), (wf) = 0)
+#define DBUF_S1_BIT BIT(0)
+#define DBUF_S2_BIT BIT(1)
+
void icl_dbuf_slices_update(struct drm_i915_private *dev_priv,
u8 req_slices);
+int intel_dbuf_max_slices(struct drm_i915_private *dev_priv);
void chv_phy_powergate_lanes(struct intel_encoder *encoder,
bool override, unsigned int mask);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 70e65c2d525d..ba2e41a03051 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -518,7 +518,7 @@ struct intel_atomic_state {
struct skl_ddb_values wm_results;
/* Number of enabled DBuf slices */
- u8 enabled_dbuf_slices_num;
+ u8 enabled_dbuf_slices_mask;
struct i915_sw_fence commit_ready;
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 7a2d9fa5a9a6..ec4b9e3cef79 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1210,7 +1210,7 @@ struct drm_i915_private {
bool distrust_bios_wm;
} wm;
- u8 enabled_dbuf_slices_num; /* GEN11 has configurable 2 slices */
+ u8 enabled_dbuf_slices_mask; /* GEN11 has configurable 2 slices */
struct dram_info {
bool valid;
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 9571611b4b16..62998cf1ce0a 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -615,7 +615,8 @@ static const struct intel_device_info intel_cherryview_info = {
.has_gt_uc = 1, \
.display.has_hdcp = 1, \
.display.has_ipc = 1, \
- .ddb_size = 896
+ .ddb_size = 896, \
+ .num_supported_dbuf_slices = 1
#define SKL_PLATFORM \
GEN9_FEATURES, \
@@ -650,6 +651,7 @@ static const struct intel_device_info intel_skylake_gt4_info = {
#define GEN9_LP_FEATURES \
GEN(9), \
.is_lp = 1, \
+ .num_supported_dbuf_slices = 1, \
.display.has_hotplug = 1, \
.engine_mask = BIT(RCS0) | BIT(VCS0) | BIT(BCS0) | BIT(VECS0), \
.pipe_mask = BIT(PIPE_A) | BIT(PIPE_B) | BIT(PIPE_C), \
@@ -774,6 +776,7 @@ static const struct intel_device_info intel_cannonlake_info = {
}, \
GEN(11), \
.ddb_size = 2048, \
+ .num_supported_dbuf_slices = 2, \
.has_logical_ring_elsq = 1, \
.color = { .degamma_lut_size = 33, .gamma_lut_size = 262145 }
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index cbb4689af432..62efd5ad07a7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7760,6 +7760,7 @@ enum {
#define DBUF_CTL _MMIO(0x45008)
#define DBUF_CTL_S1 _MMIO(0x45008)
#define DBUF_CTL_S2 _MMIO(0x44FE8)
+#define DBUF_CTL_S(X) ((X) == 1 ? DBUF_CTL_S1 : DBUF_CTL_S2)
#define DBUF_POWER_REQUEST (1 << 31)
#define DBUF_POWER_STATE (1 << 30)
#define GEN7_MSG_CTL _MMIO(0x45010)
diff --git a/drivers/gpu/drm/i915/intel_device_info.h b/drivers/gpu/drm/i915/intel_device_info.h
index 2725cb7fc169..7d4d122d2182 100644
--- a/drivers/gpu/drm/i915/intel_device_info.h
+++ b/drivers/gpu/drm/i915/intel_device_info.h
@@ -180,6 +180,7 @@ struct intel_device_info {
} display;
u16 ddb_size; /* in blocks */
+ u8 num_supported_dbuf_slices; /* number of DBuf slices */
/* Register offsets for the various display pipes and transcoders */
int pipe_offsets[I915_MAX_TRANSCODERS];
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 35eaeaac0bb5..dc6b69f5b6d7 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3616,26 +3616,22 @@ bool ilk_disable_lp_wm(struct drm_i915_private *dev_priv)
return _ilk_disable_lp_wm(dev_priv, WM_DIRTY_LP_ALL);
}
-u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv)
+u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *dev_priv)
{
- u8 enabled_dbuf_slices_num;
-
- /* Slice 1 will always be enabled */
- enabled_dbuf_slices_num = 1;
+ int i;
+ int max_slices = intel_dbuf_max_slices(dev_priv);
+ u8 enabled_slices_mask = 0;
/* Gen prior to GEN11 have only one DBuf slice */
if (INTEL_GEN(dev_priv) < 11)
- return enabled_dbuf_slices_num;
+ return DBUF_S1_BIT;
- /*
- * FIXME: for now we'll only ever use 1 slice; pretend that we have
- * only that 1 slice enabled until we have a proper way for on-demand
- * toggling of the second slice.
- */
- if (0 && I915_READ(DBUF_CTL_S2) & DBUF_POWER_STATE)
- enabled_dbuf_slices_num++;
+ for (i = 0; i < max_slices; i++) {
+ if (I915_READ(DBUF_CTL_S(BIT(i))) & DBUF_POWER_STATE)
+ enabled_slices_mask |= BIT(i);
+ }
- return enabled_dbuf_slices_num;
+ return enabled_slices_mask;
}
/*
@@ -3843,8 +3839,6 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv,
{
struct drm_atomic_state *state = crtc_state->uapi.state;
struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
- const struct drm_display_mode *adjusted_mode;
- u64 total_data_bw;
u16 ddb_size = INTEL_INFO(dev_priv)->ddb_size;
WARN_ON(ddb_size == 0);
@@ -3852,23 +3846,8 @@ static u16 intel_get_ddb_size(struct drm_i915_private *dev_priv,
if (INTEL_GEN(dev_priv) < 11)
return ddb_size - 4; /* 4 blocks for bypass path allocation */
- adjusted_mode = &crtc_state->hw.adjusted_mode;
- total_data_bw = total_data_rate * drm_mode_vrefresh(adjusted_mode);
-
- /*
- * 12GB/s is maximum BW supported by single DBuf slice.
- *
- * FIXME dbuf slice code is broken:
- * - must wait for planes to stop using the slice before powering it off
- * - plane straddling both slices is illegal in multi-pipe scenarios
- * - should validate we stay within the hw bandwidth limits
- */
- if (0 && (num_active > 1 || total_data_bw >= GBps(12))) {
- intel_state->enabled_dbuf_slices_num = 2;
- } else {
- intel_state->enabled_dbuf_slices_num = 1;
- ddb_size /= 2;
- }
+ intel_state->enabled_dbuf_slices_mask = DBUF_S1_BIT;
+ ddb_size /= 2;
return ddb_size;
}
@@ -4065,8 +4044,8 @@ void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
void skl_ddb_get_hw_state(struct drm_i915_private *dev_priv)
{
- dev_priv->enabled_dbuf_slices_num =
- intel_enabled_dbuf_slices_num(dev_priv);
+ dev_priv->enabled_dbuf_slices_mask =
+ intel_enabled_dbuf_slices_mask(dev_priv);
}
/*
@@ -5205,7 +5184,7 @@ skl_compute_ddb(struct intel_atomic_state *state)
struct intel_crtc *crtc;
int ret, i;
- state->enabled_dbuf_slices_num = dev_priv->enabled_dbuf_slices_num;
+ state->enabled_dbuf_slices_mask = dev_priv->enabled_dbuf_slices_mask;
for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
new_crtc_state, i) {
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index 22fd2daf608e..d60a85421c5a 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -32,7 +32,7 @@ void g4x_wm_get_hw_state(struct drm_i915_private *dev_priv);
void vlv_wm_get_hw_state(struct drm_i915_private *dev_priv);
void ilk_wm_get_hw_state(struct drm_i915_private *dev_priv);
void skl_wm_get_hw_state(struct drm_i915_private *dev_priv);
-u8 intel_enabled_dbuf_slices_num(struct drm_i915_private *dev_priv);
+u8 intel_enabled_dbuf_slices_mask(struct drm_i915_private *dev_priv);
void skl_pipe_ddb_get_hw_state(struct intel_crtc *crtc,
struct skl_ddb_entry *ddb_y,
struct skl_ddb_entry *ddb_uv);
--
2.24.1.485.gad05a3d8e5
More information about the Intel-gfx
mailing list