[Intel-gfx] [PATCH] drm/i915/hsw: Flush RING_IMR changes before changing the global GT IMR (vecs)

[Chris Wilson]

Haswell also requires the RING_IMR flush for its unique vebox setup to
avoid losing interrupts, as per 476af9c26063 ("drm/i915/gen6: Flush
RING_IMR changes before changing the global GT IMR"):

On Baytail, notably, we can still detect missed interrupt syndrome
(where we never spot a completed request). In this case, it can be
alleviated by always keeping the interrupt unmasked, implying that the
interrupt is being lost in the window after modifying the IMR. (This is
the reason we still have the posting reads on enable_irq, if we remove
them we miss interrupts!) Having narrowed the issue down to the IMR,
rather than keeping it always enabled, applying the usual posting
read/flush of the RING_IMR before unmasking the GT IMR also seems to
prevent the missed interrupt. So be it.

References: 476af9c26063 ("drm/i915/gen6: Flush RING_IMR changes before changing the global GT IMR")
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 3d5d6b908148..6e2661e86d18 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -996,6 +996,10 @@ hsw_vebox_irq_enable(struct intel_engine_cs *engine)
 	struct drm_i915_private *dev_priv = engine->i915;
 
 	I915_WRITE_IMR(engine, ~engine->irq_enable_mask);
+
+	/* Flush/delay to ensure the RING_IMR is active before the GT IMR */
+	POSTING_READ_FW(RING_IMR(engine->mmio_base));
+
 	gen6_unmask_pm_irq(dev_priv, engine->irq_enable_mask);
 }
 
-- 
2.20.1