[Intel-gfx] [PATCH v10 28/40] misc/mei/hdcp: Store the HDCP Pairing info
Ramalingam C
ramalingam.c at intel.com
Thu Jan 31 06:59:44 UTC 2019
Provides Pairing info to ME to store.
Pairing is a process to fast track the subsequent authentication
with the same HDCP sink.
On Success, received HDCP pairing info is stored in non-volatile
memory of ME.
v2: Rebased.
v3:
cldev is passed as first parameter [Tomas]
Redundant comments and cast are removed [Tomas]
v4:
%zd for ssize_t [Alexander]
%s/return -1/return -EIO [Alexander]
Style fixed [Uma]
v5: Rebased.
v6:
Collected the Rb-ed by.
Rebasing.
v7:
Adjust to the new mei interface.
Fix for Kdoc.
v8:
K-Doc addition. [Tomas]
memcpy for const length.
Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
Reviewed-by: Uma Shankar <uma.shankar at intel.com>
---
drivers/misc/mei/hdcp/mei_hdcp.c | 60 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 59 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
index 74219e1487d3..e8396c723ab0 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -224,13 +224,71 @@ static int mei_verify_hprime(struct device *dev, struct hdcp_port_data *data,
return 0;
}
+/**
+ * mei_store_pairing_info() - Store pairing info received at ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @hdcp_data: Intel HW specific hdcp data
+ * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_pairing_info *pairing_info)
+{
+ struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } };
+ struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !pairing_info)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ pairing_info_in.header.api_version = HDCP_API_VERSION;
+ pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO;
+ pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS;
+ pairing_info_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN;
+
+ pairing_info_in.port.integrated_port_type = data->port_type;
+ pairing_info_in.port.physical_port = (u8)GET_MEI_DDI_INDEX(data->port);
+
+ memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
+ HDCP_2_2_E_KH_KM_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in,
+ sizeof(pairing_info_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out,
+ sizeof(pairing_info_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_PAIRING_INFO,
+ pairing_info_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
static __attribute__((unused))
struct i915_hdcp_component_ops mei_hdcp_ops = {
.owner = THIS_MODULE,
.initiate_hdcp2_session = mei_initiate_hdcp2_session,
.verify_receiver_cert_prepare_km = mei_verify_receiver_cert_prepare_km,
.verify_hprime = mei_verify_hprime,
- .store_pairing_info = NULL,
+ .store_pairing_info = mei_store_pairing_info,
.initiate_locality_check = NULL,
.verify_lprime = NULL,
.get_session_key = NULL,
--
2.7.4
More information about the Intel-gfx
mailing list