[Intel-gfx] [RFC 4/7] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid()

[Manasi Navare]

On Tue, Jul 02, 2019 at 09:42:02PM +0200, Maarten Lankhorst wrote:
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d5c56ea079a4..b41ff88d3258 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -506,6 +506,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  	int max_dotclk;
>  	u16 dsc_max_output_bpp = 0;
>  	u8 dsc_slice_count = 0;
> +	bool dsc;
>  
>  	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return MODE_NO_DBLESCAN;
> @@ -553,8 +554,13 @@ intel_dp_mode_valid(struct drm_connector *connector,
>  		}
>  	}
>  
> -	if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
> -	    target_clock > max_dotclk)
> +	dsc = dsc_max_output_bpp && dsc_slice_count;
> +
> +	/* Gen11 has big joiner for handling this */
> +	if (dsc && dsc_slice_count >= 2 && INTEL_GEN(dev_priv) >= 11)
> +		max_dotclk *= 2;

This should be dsc_slice_Count >=4 since big joiner cannot be enabled if
small joiner is not enabled and small joiner cannot be enabled for slice count < 2

Manasi

> +
> +	if ((mode_rate > max_rate && !dsc) || target_clock > max_dotclk)
>  		return MODE_CLOCK_HIGH;
>  
>  	if (mode->clock < 10000)
> -- 
> 2.20.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx