[Intel-gfx] [PATCH v2 24/25] drm/i915/tgl: Add DPLL registers
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Jul 9 12:56:51 UTC 2019
On Mon, Jul 08, 2019 at 04:16:28PM -0700, Lucas De Marchi wrote:
> On TGL the port programming for combophy is very similar to ICL, so
> adapt the callers to possibly use the different register values.
>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 24 +++++++++++++++----
> drivers/gpu/drm/i915/i915_reg.h | 15 ++++++++++++
> 2 files changed, 34 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> index ae1c552d7afb..330b42a1f54e 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
> @@ -3113,8 +3113,13 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
> if (!(val & PLL_ENABLE))
> goto out;
>
> - hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
> - hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
> + if (INTEL_GEN(dev_priv) >= 12) {
> + hw_state->cfgcr0 = I915_READ(TGL_DPLL_CFGCR0(id));
> + hw_state->cfgcr1 = I915_READ(TGL_DPLL_CFGCR1(id));
> + } else {
> + hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
> + hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
> + }
>
> ret = true;
> out:
> @@ -3148,10 +3153,19 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
> {
> struct intel_dpll_hw_state *hw_state = &pll->state.hw_state;
> const enum intel_dpll_id id = pll->info->id;
> + i915_reg_t cfgcr0_reg, cfgcr1_reg;
> +
> + if (INTEL_GEN(dev_priv) >= 12) {
> + cfgcr0_reg = TGL_DPLL_CFGCR0(id);
> + cfgcr1_reg = TGL_DPLL_CFGCR1(id);
> + } else {
> + cfgcr0_reg = ICL_DPLL_CFGCR0(id);
> + cfgcr1_reg = ICL_DPLL_CFGCR1(id);
> + }
>
> - I915_WRITE(ICL_DPLL_CFGCR0(id), hw_state->cfgcr0);
> - I915_WRITE(ICL_DPLL_CFGCR1(id), hw_state->cfgcr1);
> - POSTING_READ(ICL_DPLL_CFGCR1(id));
> + I915_WRITE(cfgcr0_reg, hw_state->cfgcr0);
> + I915_WRITE(cfgcr1_reg, hw_state->cfgcr1);
> + POSTING_READ(cfgcr1_reg);
> }
>
> static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index fbcc7981c8c4..84c04ea67ec8 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -242,6 +242,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
> #define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
> #define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
> #define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
> +#define _MMIO_PLL3(pll, a, b, c) _MMIO(_PICK(pll, a, b, c))
>
> /*
> * Device info offset array based helpers for groups of registers with unevenly
> @@ -9958,6 +9959,20 @@ enum skl_power_gate {
> #define ICL_DPLL_CFGCR1(pll) _MMIO_PLL(pll, _ICL_DPLL0_CFGCR1, \
> _ICL_DPLL1_CFGCR1)
>
> +#define _TGL_DPLL0_CFGCR0 0x164284
> +#define _TGL_DPLL1_CFGCR0 0x16428C
> +#define _TGL_TBTPLL_CFGCR0 0x16429C
What about DPLL4?
In fact looks like the ICL counterparts are borked even for ehl DPLL4.
> +#define TGL_DPLL_CFGCR0(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR0, \
> + _TGL_DPLL1_CFGCR0, \
> + _TGL_TBTPLL_CFGCR0)
> +
> +#define _TGL_DPLL0_CFGCR1 0x164288
> +#define _TGL_DPLL1_CFGCR1 0x164290
> +#define _TGL_TBTPLL_CFGCR1 0x1642A0
> +#define TGL_DPLL_CFGCR1(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR1, \
> + _TGL_DPLL1_CFGCR1, \
> + _TGL_TBTPLL_CFGCR1)
> +
> /* BXT display engine PLL */
> #define BXT_DE_PLL_CTL _MMIO(0x6d000)
> #define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
> --
> 2.21.0
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list