[Intel-gfx] [CI 20/21] drm/i915/tgl: Add DPLL registers
Lucas De Marchi
lucas.demarchi at intel.com
Thu Jul 11 00:38:32 UTC 2019
On TGL the port programming for combophy is very similar to ICL, so
adapt the callers to possibly use the different register values.
v2 (Lucas): Add TODO with about DPLL4 (requested by Ville)
Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708231629.9296-25-lucas.demarchi@intel.com
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 24 +++++++++++++++----
drivers/gpu/drm/i915/i915_reg.h | 17 +++++++++++++
2 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 3f68be716da9..cf5f6909ba9c 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3123,8 +3123,13 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
if (!(val & PLL_ENABLE))
goto out;
- hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
- hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
+ if (INTEL_GEN(dev_priv) >= 12) {
+ hw_state->cfgcr0 = I915_READ(TGL_DPLL_CFGCR0(id));
+ hw_state->cfgcr1 = I915_READ(TGL_DPLL_CFGCR1(id));
+ } else {
+ hw_state->cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(id));
+ hw_state->cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(id));
+ }
ret = true;
out:
@@ -3158,10 +3163,19 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
{
struct intel_dpll_hw_state *hw_state = &pll->state.hw_state;
const enum intel_dpll_id id = pll->info->id;
+ i915_reg_t cfgcr0_reg, cfgcr1_reg;
+
+ if (INTEL_GEN(dev_priv) >= 12) {
+ cfgcr0_reg = TGL_DPLL_CFGCR0(id);
+ cfgcr1_reg = TGL_DPLL_CFGCR1(id);
+ } else {
+ cfgcr0_reg = ICL_DPLL_CFGCR0(id);
+ cfgcr1_reg = ICL_DPLL_CFGCR1(id);
+ }
- I915_WRITE(ICL_DPLL_CFGCR0(id), hw_state->cfgcr0);
- I915_WRITE(ICL_DPLL_CFGCR1(id), hw_state->cfgcr1);
- POSTING_READ(ICL_DPLL_CFGCR1(id));
+ I915_WRITE(cfgcr0_reg, hw_state->cfgcr0);
+ I915_WRITE(cfgcr1_reg, hw_state->cfgcr1);
+ POSTING_READ(cfgcr1_reg);
}
static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 87f79dc8e0c3..d290a6db2a14 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -242,6 +242,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define _MMIO_PIPE3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
#define _MMIO_PORT3(pipe, a, b, c) _MMIO(_PICK(pipe, a, b, c))
#define _MMIO_PHY3(phy, a, b, c) _MMIO(_PHY3(phy, a, b, c))
+#define _MMIO_PLL3(pll, a, b, c) _MMIO(_PICK(pll, a, b, c))
/*
* Device info offset array based helpers for groups of registers with unevenly
@@ -9951,6 +9952,22 @@ enum skl_power_gate {
#define ICL_DPLL_CFGCR1(pll) _MMIO_PLL(pll, _ICL_DPLL0_CFGCR1, \
_ICL_DPLL1_CFGCR1)
+#define _TGL_DPLL0_CFGCR0 0x164284
+#define _TGL_DPLL1_CFGCR0 0x16428C
+/* TODO: add DPLL4 */
+#define _TGL_TBTPLL_CFGCR0 0x16429C
+#define TGL_DPLL_CFGCR0(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR0, \
+ _TGL_DPLL1_CFGCR0, \
+ _TGL_TBTPLL_CFGCR0)
+
+#define _TGL_DPLL0_CFGCR1 0x164288
+#define _TGL_DPLL1_CFGCR1 0x164290
+/* TODO: add DPLL4 */
+#define _TGL_TBTPLL_CFGCR1 0x1642A0
+#define TGL_DPLL_CFGCR1(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR1, \
+ _TGL_DPLL1_CFGCR1, \
+ _TGL_TBTPLL_CFGCR1)
+
/* BXT display engine PLL */
#define BXT_DE_PLL_CTL _MMIO(0x6d000)
#define BXT_DE_PLL_RATIO(x) (x) /* {60,65,100} * 19.2MHz */
--
2.21.0
More information about the Intel-gfx
mailing list