[Intel-gfx] [PATCH v3 2/2] drm/i915/display/icl: Bump up the plane/fb height

[Ville Syrjälä]

On Wed, Jul 10, 2019 at 02:39:51PM -0700, Manasi Navare wrote:
> On ICL+, the max supported plane height is 4320, so bump it up
> To support 4320, we need to increase the number of bits used to
> read plane_height to 13 as opposed to older 12 bits.
> 
> v2:
> * ICL plane height supported is 4320 (Ville)
> * Add a new line between max width and max height (Jose)
> 
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 22 ++++++++++++++++++--
>  1 file changed, 20 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 9883f607bb88..e4915d68147a 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3343,6 +3343,16 @@ static int icl_max_plane_width(const struct drm_framebuffer *fb,
>  	return 5120;
>  }
>  
> +static int skl_max_plane_height(void)
> +{
> +	return 4096;
> +}
> +
> +static int icl_max_plane_height(void)
> +{
> +	return 4320;
> +}
> +
>  static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
>  					   int main_x, int main_y, u32 main_offset)
>  {
> @@ -3391,7 +3401,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
>  	int w = drm_rect_width(&plane_state->base.src) >> 16;
>  	int h = drm_rect_height(&plane_state->base.src) >> 16;
>  	int max_width;
> -	int max_height = 4096;
> +	int max_height;
>  	u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
>  
>  	if (INTEL_GEN(dev_priv) >= 11)
> @@ -3401,6 +3411,11 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)
>  	else
>  		max_width = skl_max_plane_width(fb, 0, rotation);
>  
> +	if (INTEL_GEN(dev_priv) >= 11)
> +		max_height = icl_max_plane_height();
> +	else
> +		max_height = skl_max_plane_height();
> +
>  	if (w > max_width || h > max_height) {
>  		DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
>  			      w, h, max_width, max_height);
> @@ -9865,7 +9880,10 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,
>  	offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
>  
>  	val = I915_READ(PLANE_SIZE(pipe, plane_id));
> -	fb->height = ((val >> 16) & 0xfff) + 1;
> +	if (INTEL_GEN(dev_priv) >= 12)
> +		fb->height = ((val >> 16) & 0x1fff) + 1;
> +	else
> +		fb->height = ((val >> 16) & 0xfff) + 1;
>  	fb->width = ((val >> 0) & 0x1fff) + 1;

The extra bits should be mbz I think, so no need for the 'if'.
Just use 0x1fff always, or even extend both masks to 0xffff.

Looks like i9xx_get_initial_plane_config() is also missing a bit or two,
which should be fixed with a separate patch.

>  
>  	val = I915_READ(PLANE_STRIDE(pipe, plane_id));
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel