[Intel-gfx] [PATCH] drm/dp/dsc: Add Support for all BPCs supported by TGL

Manasi Navare manasi.d.navare at intel.com
Thu Jul 11 17:24:19 UTC 2019


On Thu, Jul 11, 2019 at 04:47:17PM +0300, Ville Syrjälä wrote:
> On Wed, Jul 10, 2019 at 04:09:21PM -0700, Anusha Srivatsa wrote:
> > DSC engine on ICL supports only 8 and 10 BPC as the input
> > BPC. But DSC engine in TGL supports 8, 10 and 12 BPC.
> > Add 12 BPC support for DSC while calculating compression
> > configuration.
> > 
> > Cc: Manasi Navare <manasi.d.navare at intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 0bdb7ecc5a81..cd089643c80d 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -71,6 +71,7 @@
> >  #define DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER	61440
> >  #define DP_DSC_MIN_SUPPORTED_BPC		8
> >  #define DP_DSC_MAX_SUPPORTED_BPC		10
> > +#define TGL_DP_DSC_MAX_SUPPORTED_BPC		12
> 
> These defines aren't doing any good IMO. I'd just nuke them.

So just remove all the #defines and use the values directly?

> 
> >  
> >  /* DP DSC throughput values used for slice count calculations KPixels/s */
> >  #define DP_DSC_PEAK_PIXEL_RATE			2720000
> > @@ -1911,8 +1912,12 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >  	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
> >  		return -EINVAL;
> >  
> > -	dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> > -			    conn_state->max_requested_bpc);
> > +	if (INTEL_GEN(dev_priv) > 11)
> 
> More customarily >= 12

I agree

Manasi

> 
> > +		dsc_max_bpc = min_t(u8, TGL_DP_DSC_MAX_SUPPORTED_BPC,
> > +				    conn_state->max_requested_bpc);
> > +	else
> > +		dsc_max_bpc = min_t(u8, DP_DSC_MAX_SUPPORTED_BPC,
> > +				    conn_state->max_requested_bpc);
> >  
> >  	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, dsc_max_bpc);
> >  	if (pipe_bpp < DP_DSC_MIN_SUPPORTED_BPC * 3) {
> > -- 
> > 2.21.0
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> -- 
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list