[Intel-gfx] [PATCH v4 1/2] drm/i915/display/icl: Bump up the hdisplay and vdisplay as per transcoder limits

[Manasi Navare]

On ICL+, the vertical limits for the transcoders are increased to 8192
and horizontal limits are bumped to 16K so bump up
limits in intel_mode_valid()

v4:
* Increase the hdisplay to 16K (Ville)
v3:
* Supported starting ICL (Ville)
* Use the higher limits from TRANS_VTOTAL register (Ville)
v2:
* Checkpatch warning (Manasi)

Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index f07081815b80..15006764862b 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15764,8 +15764,13 @@ intel_mode_valid(struct drm_device *dev,
 			   DRM_MODE_FLAG_CLKDIV2))
 		return MODE_BAD;
 
-	if (INTEL_GEN(dev_priv) >= 9 ||
-	    IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
+	if (INTEL_GEN(dev_priv) >= 11) {
+		hdisplay_max = 16384;
+		vdisplay_max = 8192;
+		htotal_max = 16384;
+		vtotal_max = 8192;
+	} else if (INTEL_GEN(dev_priv) >= 9 ||
+		   IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
 		hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
 		vdisplay_max = 4096;
 		htotal_max = 8192;
-- 
2.19.1