[Intel-gfx] [PATCH 11/22] drm/i915/tgl: start adding the DKL PLLs to use on TC ports

[Lucas De Marchi]

The disable function can be the same as for MG phy since the same
registers are used. The others are different as registers change -
prepare for that using an empty dkl_pll_write() to be implemented later.

Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 98 ++++++++++++++++++-
 1 file changed, 97 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index 0ef14023865b..c59367ff5b10 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3158,6 +3158,60 @@ static bool mg_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	return ret;
 }
 
+static bool dkl_pll_get_hw_state(struct drm_i915_private *dev_priv,
+				 struct intel_shared_dpll *pll,
+				 struct intel_dpll_hw_state *hw_state)
+{
+	const enum intel_dpll_id id = pll->info->id;
+	enum tc_port tc_port = icl_pll_id_to_tc_port(id);
+	intel_wakeref_t wakeref;
+	bool ret = false;
+	u32 val;
+
+	wakeref = intel_display_power_get_if_enabled(dev_priv,
+						     POWER_DOMAIN_DISPLAY_CORE);
+	if (!wakeref)
+		return false;
+
+	val = I915_READ(MG_PLL_ENABLE(tc_port));
+	if (!(val & PLL_ENABLE))
+		goto out;
+
+	/*
+	 * All registers read here have the same HIP_INDEX_REG even though
+	 * they are on different building blocks
+	 */
+	I915_WRITE(HIP_INDEX_REG(tc_port), 0x2);
+
+	hw_state->mg_refclkin_ctl = I915_READ(DKL_REFCLKIN_CTL(tc_port));
+	hw_state->mg_refclkin_ctl &= MG_REFCLKIN_CTL_OD_2_MUX_MASK;
+
+	hw_state->mg_clktop2_hsclkctl =
+		I915_READ(DKL_CLKTOP2_HSCLKCTL(tc_port));
+	hw_state->mg_clktop2_hsclkctl &=
+		MG_CLKTOP2_HSCLKCTL_TLINEDRV_CLKSEL_MASK |
+		MG_CLKTOP2_HSCLKCTL_CORE_INPUTSEL_MASK |
+		MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK |
+		MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK;
+
+	hw_state->mg_clktop2_coreclkctl1 =
+		I915_READ(DKL_CLKTOP2_CORECLKCTL1(tc_port));
+	hw_state->mg_clktop2_coreclkctl1 &=
+		MG_CLKTOP2_CORECLKCTL1_A_DIVRATIO_MASK;
+
+	hw_state->mg_pll_div0 = I915_READ(DKL_PLL_DIV0(tc_port));
+	hw_state->mg_pll_div1 = I915_READ(DKL_PLL_DIV1(tc_port));
+	hw_state->mg_pll_ssc = I915_READ(DKL_PLL_SSC(tc_port));
+	hw_state->mg_pll_bias = I915_READ(DKL_PLL_BIAS(tc_port));
+	hw_state->mg_pll_tdc_coldst_bias =
+		I915_READ(DKL_PLL_TDC_COLDST_BIAS(tc_port));
+
+	ret = true;
+out:
+	intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
+	return ret;
+}
+
 static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
 				 struct intel_shared_dpll *pll,
 				 struct intel_dpll_hw_state *hw_state,
@@ -3282,6 +3336,12 @@ static void icl_mg_pll_write(struct drm_i915_private *dev_priv,
 	POSTING_READ(MG_PLL_TDC_COLDST_BIAS(tc_port));
 }
 
+static void dkl_pll_write(struct drm_i915_private *dev_priv,
+			  struct intel_shared_dpll *pll)
+{
+	/* TODO */
+}
+
 static void icl_pll_power_enable(struct drm_i915_private *dev_priv,
 				 struct intel_shared_dpll *pll,
 				 i915_reg_t enable_reg)
@@ -3389,6 +3449,31 @@ static void mg_pll_enable(struct drm_i915_private *dev_priv,
 	/* DVFS post sequence would be here. See the comment above. */
 }
 
+static void dkl_pll_enable(struct drm_i915_private *dev_priv,
+			   struct intel_shared_dpll *pll)
+{
+	/*
+	 * From spec: MG register instances are being used for TypeC in general. The
+	 * same MG register instances should be programmed for Dekel PLLs as well
+	 */
+	i915_reg_t enable_reg =
+		MG_PLL_ENABLE(icl_pll_id_to_tc_port(pll->info->id));
+
+	icl_pll_power_enable(dev_priv, pll, enable_reg);
+
+	dkl_pll_write(dev_priv, pll);
+
+	/*
+	 * DVFS pre sequence would be here, but in our driver the cdclk code
+	 * paths should already be setting the appropriate voltage, hence we do
+	 * nothing here.
+	 */
+
+	icl_pll_enable(dev_priv, pll, enable_reg);
+
+	/* DVFS post sequence would be here. See the comment above. */
+}
+
 static void icl_pll_disable(struct drm_i915_private *dev_priv,
 			    struct intel_shared_dpll *pll,
 			    i915_reg_t enable_reg)
@@ -3533,11 +3618,22 @@ static const struct intel_dpll_mgr ehl_pll_mgr = {
 	.dump_hw_state = icl_dump_hw_state,
 };
 
+static const struct intel_shared_dpll_funcs dkl_pll_funcs = {
+	.enable = dkl_pll_enable,
+	.disable = mg_pll_disable,
+	.get_hw_state = dkl_pll_get_hw_state,
+};
+
 static const struct dpll_info tgl_plls[] = {
 	{ "DPLL 0", &combo_pll_funcs, DPLL_ID_ICL_DPLL0,  0 },
 	{ "DPLL 1", &combo_pll_funcs, DPLL_ID_ICL_DPLL1,  0 },
 	{ "TBT PLL",  &tbt_pll_funcs, DPLL_ID_ICL_TBTPLL, 0 },
-	/* TODO: Add typeC plls */
+	{ "TC PLL 1", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL1, 0 },
+	{ "TC PLL 2", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL2, 0 },
+	{ "TC PLL 3", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL3, 0 },
+	{ "TC PLL 4", &dkl_pll_funcs, DPLL_ID_ICL_MGPLL4, 0 },
+	{ "TC PLL 5", &dkl_pll_funcs, DPLL_ID_TGL_MGPLL5, 0 },
+	{ "TC PLL 6", &dkl_pll_funcs, DPLL_ID_TGL_MGPLL6, 0 },
 	{ },
 };
 
-- 
2.21.0