[Intel-gfx] [PATCH 4/4] drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping

Shankar, Uma uma.shankar at intel.com
Tue Jul 16 10:24:01 UTC 2019



>-----Original Message-----
>From: Kulkarni, Vandita
>Sent: Tuesday, July 2, 2019 9:49 AM
>To: intel-gfx at lists.freedesktop.org
>Cc: ville.syrjala at linux.intel.com; Nikula, Jani <jani.nikula at intel.com>; Shankar, Uma
><uma.shankar at intel.com>; Kulkarni, Vandita <vandita.kulkarni at intel.com>
>Subject: [PATCH 4/4] drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping
>
>No need to keep it on till IO enabling.
Minor nit: You can replace "it" by "ddi clock". Also add that when (at what stage) they
get enabled to give a relative picture.

With this fixed.
Reviewed-by: Uma Shankar <uma.shankar at intel.com>

>Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
>---
> drivers/gpu/drm/i915/display/icl_dsi.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
>b/drivers/gpu/drm/i915/display/icl_dsi.c
>index d1c50a4186f0..99ce8c708353 100644
>--- a/drivers/gpu/drm/i915/display/icl_dsi.c
>+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
>@@ -609,8 +609,12 @@ static void gen11_dsi_map_pll(struct intel_encoder
>*encoder,
> 	I915_WRITE(DPCLKA_CFGCR0_ICL, val);
>
> 	for_each_dsi_port(port, intel_dsi->ports) {
>-		val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
>+		if (INTEL_GEN(dev_priv) >= 12)
>+			val |= DPCLKA_CFGCR0_DDI_CLK_OFF(port);
>+		else
>+			val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
> 	}
>+
> 	I915_WRITE(DPCLKA_CFGCR0_ICL, val);
>
> 	POSTING_READ(DPCLKA_CFGCR0_ICL);
>@@ -955,6 +959,8 @@ static void
> gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
> 			      const struct intel_crtc_state *pipe_config)  {
>+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>+
> 	/* step 4a: power up all lanes of the DDI used by DSI */
> 	gen11_dsi_power_up_lanes(encoder);
>
>@@ -977,7 +983,8 @@ gen11_dsi_enable_port_and_phy(struct intel_encoder
>*encoder,
> 	gen11_dsi_configure_transcoder(encoder, pipe_config);
>
> 	/* Step 4l: Gate DDI clocks */
>-	gen11_dsi_gate_clocks(encoder);
>+	if (IS_GEN(dev_priv, 11))
>+		gen11_dsi_gate_clocks(encoder);
> }
>
> static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
>--
>2.21.0.5.gaeb582a



More information about the Intel-gfx mailing list