[Intel-gfx] [CI 1/3] drm/i915/tgl: skip setting PORT_CL_DW12_* on initialization
Lucas De Marchi
lucas.demarchi at intel.com
Thu Jul 25 23:39:52 UTC 2019
According to the spec when initializing the display in TGL we should not
set PORT_CL_DW12 for the Aux channel of the combo PHYs. We will re-use the
power well hooks from ICL so only set this register on gen < 12.
v2: Generalize check for gen 12 (suggested by José)
v3: Rebase after enum phy introduction
Cc: Imre Deak <imre.deak at intel.com>
Cc: Matt Roper <matthew.d.roper at intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood at intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-2-lucas.demarchi@intel.com
---
drivers/gpu/drm/i915/display/intel_display_power.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 93a148684c53..dd2a50b8ba0a 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -458,8 +458,10 @@ icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
val = I915_READ(regs->driver);
I915_WRITE(regs->driver, val | HSW_PWR_WELL_CTL_REQ(pw_idx));
- val = I915_READ(ICL_PORT_CL_DW12(phy));
- I915_WRITE(ICL_PORT_CL_DW12(phy), val | ICL_LANE_ENABLE_AUX);
+ if (INTEL_GEN(dev_priv) < 12) {
+ val = I915_READ(ICL_PORT_CL_DW12(phy));
+ I915_WRITE(ICL_PORT_CL_DW12(phy), val | ICL_LANE_ENABLE_AUX);
+ }
hsw_wait_for_power_well_enable(dev_priv, power_well);
@@ -487,8 +489,10 @@ icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
enum phy phy = ICL_AUX_PW_TO_PHY(pw_idx);
u32 val;
- val = I915_READ(ICL_PORT_CL_DW12(phy));
- I915_WRITE(ICL_PORT_CL_DW12(phy), val & ~ICL_LANE_ENABLE_AUX);
+ if (INTEL_GEN(dev_priv) < 12) {
+ val = I915_READ(ICL_PORT_CL_DW12(phy));
+ I915_WRITE(ICL_PORT_CL_DW12(phy), val & ~ICL_LANE_ENABLE_AUX);
+ }
val = I915_READ(regs->driver);
I915_WRITE(regs->driver, val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
--
2.21.0
More information about the Intel-gfx
mailing list