[Intel-gfx] [PATCH 3/3] drm/i915/dsi: Read back pclk set by GOP and use that as pclk (v3)

[Hans de Goede]

The GOP sometimes initializes the pclk at a (slightly) different frequency
then the pclk which we've calculated.

This commit makes the DSI code read-back the pclk set by the GOP and
if that is within a reasonable margin of the calculated pclk, uses
that instead.

This fixes the first modeset being a full modeset instead of a
fast modeset on systems where the GOP pclk is different.

Changes in v2:
-Use intel_encoder_current_mode() to get the pclk setup by the GOP

Changes in v3:
-Back to the readback approach, skipping the dsi_pll.ctrl / .dev checks
 in intel_pipe_config_compare() when adjust is set leads to:
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.ctrl (...)
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.div (...)
-Do the readback and pclk overriding from vlv_dsi_init(), rather then from
 intel_dsi_vbt_init() as the vbt code should not be touching the hw

Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/gpu/drm/i915/vlv_dsi.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index 59500c838b9d..6d96891984a5 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1865,7 +1865,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 	struct drm_encoder *encoder;
 	struct intel_connector *intel_connector;
 	struct drm_connector *connector;
-	struct drm_display_mode *fixed_mode;
+	struct drm_display_mode *current_mode, *fixed_mode;
 	enum port port;
 
 	DRM_DEBUG_KMS("\n");
@@ -1909,6 +1909,9 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
 
 	intel_encoder->port = port;
+	intel_encoder->type = INTEL_OUTPUT_DSI;
+	intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
+	intel_encoder->cloneable = 0;
 
 	/*
 	 * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
@@ -1946,6 +1949,20 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 		goto err;
 	}
 
+	/* Use clock read-back from current hw-state for fastboot */
+	current_mode = intel_encoder_current_mode(intel_encoder);
+	if (current_mode) {
+		DRM_DEBUG_KMS("Calculated pclk %d GOP %d\n",
+			      intel_dsi->pclk, current_mode->clock);
+		if (intel_fuzzy_clock_check(intel_dsi->pclk,
+					    current_mode->clock)) {
+			DRM_DEBUG_KMS("Using GOP pclk\n");
+			intel_dsi->pclk = current_mode->clock;
+		}
+
+		kfree(current_mode);
+	}
+
 	vlv_dphy_param_init(intel_dsi);
 
 	/*
@@ -1963,9 +1980,6 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 		}
 	}
 
-	intel_encoder->type = INTEL_OUTPUT_DSI;
-	intel_encoder->power_domain = POWER_DOMAIN_PORT_DSI;
-	intel_encoder->cloneable = 0;
 	drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
 			   DRM_MODE_CONNECTOR_DSI);
 
-- 
2.21.0