[Intel-gfx] [PATCH 13/23] drm/i915: Fix the TypeC port mode sanitization during loading/resume
Souza, Jose
jose.souza at intel.com
Fri Jun 7 22:39:36 UTC 2019
On Tue, 2019-06-04 at 17:58 +0300, Imre Deak wrote:
> For using the correct AUX power domains we have to sanitize the TypeC
> port mode early, so move that before encoder sanitization. To do this
> properly read out the actual port mode instead of just relying on the
> VBT legacy port flag (which can be incorrect).
>
> We also verify that the PHY is connected as expected if the port is
> active. In case the port is inactive we connect the PHY in case of a
> legacy port - as we did so far. The PHY will be connected during
> detection for DP-alt mode - as it was done so far. For TBT-alt mode
> nothing needs to be done to connect the PHY.
>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 16 +-----
> drivers/gpu/drm/i915/intel_display.c | 10 ++++
> drivers/gpu/drm/i915/intel_dp_mst.h | 8 ++-
> drivers/gpu/drm/i915/intel_tc.c | 83
> ++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_tc.h | 2 +
> 5 files changed, 103 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index d236839bee19..2bc3b4f2c9a5 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -3918,17 +3918,6 @@ static void intel_ddi_encoder_suspend(struct
> intel_encoder *encoder)
> icl_tc_phy_disconnect(dig_port);
> }
>
> -static void intel_ddi_encoder_reset(struct drm_encoder *drm_encoder)
> -{
> - struct intel_digital_port *dig_port =
> enc_to_dig_port(drm_encoder);
> - struct drm_i915_private *i915 = to_i915(drm_encoder->dev);
> -
> - if (intel_port_is_tc(i915, dig_port->base.port))
> - intel_digital_port_connected(&dig_port->base);
> -
> - intel_dp_encoder_reset(drm_encoder);
> -}
> -
> static void intel_ddi_encoder_destroy(struct drm_encoder *encoder)
> {
> struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> @@ -3944,7 +3933,7 @@ static void intel_ddi_encoder_destroy(struct
> drm_encoder *encoder)
> }
>
> static const struct drm_encoder_funcs intel_ddi_funcs = {
> - .reset = intel_ddi_encoder_reset,
> + .reset = intel_dp_encoder_reset,
> .destroy = intel_ddi_encoder_destroy,
> };
>
> @@ -4309,9 +4298,6 @@ void intel_ddi_init(struct drm_i915_private
> *dev_priv, enum port port)
>
> intel_infoframe_init(intel_dig_port);
>
> - if (intel_port_is_tc(dev_priv, port))
> - intel_digital_port_connected(intel_encoder);
> -
> return;
>
> err:
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 0e425a6eebf3..91d18cd0371c 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -75,6 +75,7 @@
> #include "intel_sdvo.h"
> #include "intel_sideband.h"
> #include "intel_sprite.h"
> +#include "intel_tc.h"
> #include "intel_tv.h"
> #include "intel_vdsc.h"
>
> @@ -16683,6 +16684,15 @@ intel_modeset_setup_hw_state(struct
> drm_device *dev,
> intel_modeset_readout_hw_state(dev);
>
> /* HW state is read out, now we need to sanitize this mess. */
> +
> + /* Sanitize the TypeC port mode upfront, encoders depend on
> this */
> + for_each_intel_encoder(dev, encoder) {
> + /* We need to sanitize only the MST primary port. */
> + if (encoder->type != INTEL_OUTPUT_DP_MST &&
> + intel_port_is_tc(dev_priv, encoder->port))
> + intel_tc_port_sanitize(enc_to_dig_port(&encoder
> ->base));
> + }
> +
> get_encoder_power_domains(dev_priv);
>
> if (HAS_PCH_IBX(dev_priv))
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.h
> b/drivers/gpu/drm/i915/intel_dp_mst.h
> index 1470c6e0514b..6754c211205a 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.h
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.h
> @@ -6,9 +6,15 @@
> #ifndef __INTEL_DP_MST_H__
> #define __INTEL_DP_MST_H__
>
> -struct intel_digital_port;
> +#include "intel_drv.h"
>
> int intel_dp_mst_encoder_init(struct intel_digital_port
> *intel_dig_port, int conn_id);
> void intel_dp_mst_encoder_cleanup(struct intel_digital_port
> *intel_dig_port);
> +static inline int
> +intel_dp_mst_encoder_active_links(struct intel_digital_port
> *intel_dig_port)
> +{
> + return intel_dig_port->dp.active_mst_links;
> +}
> +
>
> #endif /* __INTEL_DP_MST_H__ */
> diff --git a/drivers/gpu/drm/i915/intel_tc.c
> b/drivers/gpu/drm/i915/intel_tc.c
> index 9832e2ddb92e..9ebf25d7931c 100644
> --- a/drivers/gpu/drm/i915/intel_tc.c
> +++ b/drivers/gpu/drm/i915/intel_tc.c
> @@ -3,6 +3,7 @@
> * Copyright © 2019 Intel Corporation
> */
> #include "intel_display.h"
> +#include "intel_dp_mst.h"
> #include "i915_drv.h"
> #include "intel_tc.h"
>
> @@ -167,6 +168,15 @@ static bool icl_tc_phy_set_safe_mode(struct
> intel_digital_port *dig_port,
> return true;
> }
>
> +static bool icl_tc_phy_is_in_safe_mode(struct intel_digital_port
> *dig_port)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> + enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port-
> >base.port);
> +
> + return !(I915_READ(PORT_TX_DFLEXDPCSSS) &
> + DP_PHY_MODE_STATUS_NOT_SAFE(tc_port));
> +}
> +
> /*
> * This function implements the first part of the Connect Flow
> described by our
> * specification, Gen11 TypeC Programming chapter. The rest of the
> flow (reading
> @@ -250,6 +260,49 @@ void icl_tc_phy_disconnect(struct
> intel_digital_port *dig_port)
> }
> }
>
> +static bool icl_tc_phy_is_connected(struct intel_digital_port
> *dig_port)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> + enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port-
> >base.port);
> +
> + if (!icl_tc_phy_status_complete(dig_port)) {
> + DRM_DEBUG_KMS("Port %s: PHY status not complete\n",
> + tc_port_name(dev_priv, tc_port));
> + return dig_port->tc_mode == TC_PORT_TBT_ALT;
> + }
> +
> + if (icl_tc_phy_is_in_safe_mode(dig_port)) {
> + DRM_DEBUG_KMS("Port %s: PHY still in safe mode\n",
> + tc_port_name(dev_priv, tc_port));
> +
> + return false;
> + }
> +
> + return dig_port->tc_mode == TC_PORT_DP_ALT ||
> + dig_port->tc_mode == TC_PORT_LEGACY;
> +}
> +
> +static enum tc_port_mode
> +intel_tc_port_get_current_mode(struct intel_digital_port *dig_port)
> +{
> + u32 live_status_mask = tc_port_live_status_mask(dig_port);
> + bool in_safe_mode = icl_tc_phy_is_in_safe_mode(dig_port);
> + enum tc_port_mode mode;
> +
> + if (in_safe_mode ||
> WARN_ON(!icl_tc_phy_status_complete(dig_port)))
> + return TC_PORT_TBT_ALT;
> +
> + mode = dig_port->tc_legacy_port ? TC_PORT_LEGACY :
> TC_PORT_DP_ALT;
> + if (live_status_mask) {
> + enum tc_port_mode live_mode = fls(live_status_mask) -
> 1;
> +
> + if (!WARN_ON(live_mode == TC_PORT_TBT_ALT))
> + mode = live_mode;
> + }
> +
> + return mode;
> +}
> +
> static enum tc_port_mode
> intel_tc_port_get_target_mode(struct intel_digital_port *dig_port)
> {
> @@ -278,6 +331,36 @@ static void intel_tc_port_reset_mode(struct
> intel_digital_port *dig_port)
> tc_port_mode_name(dig_port->tc_mode));
> }
>
> +void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
> +{
> + struct drm_i915_private *dev_priv = to_i915(dig_port-
> >base.base.dev);
> + struct intel_encoder *encoder = &dig_port->base;
> + enum tc_port tc_port = intel_port_to_tc(dev_priv, encoder-
> >port);
> + int active_links = 0;
> +
> + dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
> + if (dig_port->dp.is_mst)
> + active_links =
> intel_dp_mst_encoder_active_links(dig_port);
> + else if (encoder->base.crtc)
> + active_links = to_intel_crtc(encoder->base.crtc)-
> >active;
> +
> + if (active_links) {
> + if (!icl_tc_phy_is_connected(dig_port))
> + DRM_DEBUG_DRIVER("Port %s: PHY disconnected
> with %d active link(s)\n",
> + tc_port_name(dev_priv,
> tc_port),
> + active_links);
> + goto out;
And then probe sequences will take care of call
intel_digital_port_connected() to reset TC state.
> + }
> +
> + if (dig_port->tc_legacy_port)
> + icl_tc_phy_connect(dig_port);
> +
> +out:
> + DRM_DEBUG_DRIVER("Port %s: sanitize mode (%s)\n",
> + tc_port_name(dev_priv, tc_port),
> + tc_port_mode_name(dig_port->tc_mode));
Should be:
DRM_DEBUG_DRIVER()
I guess I missed this on previous patches too.
With that:
Reviewed-by: José Roberto de Souza <jose.souza at intel.com>
> +}
> +
> static bool
> intel_tc_port_needs_reset(struct intel_digital_port *dig_port)
> {
> diff --git a/drivers/gpu/drm/i915/intel_tc.h
> b/drivers/gpu/drm/i915/intel_tc.h
> index e937f5326959..10f0f0d81ee4 100644
> --- a/drivers/gpu/drm/i915/intel_tc.h
> +++ b/drivers/gpu/drm/i915/intel_tc.h
> @@ -11,4 +11,6 @@ bool intel_tc_port_connected(struct
> intel_digital_port *dig_port);
> u32 intel_tc_port_get_lane_info(struct intel_digital_port
> *dig_port);
> int intel_tc_port_fia_max_lane_count(struct intel_digital_port
> *dig_port);
>
> +void intel_tc_port_sanitize(struct intel_digital_port *dig_port);
> +
> #endif /* __INTEL_TC_H__ */
More information about the Intel-gfx
mailing list