[Intel-gfx] [PATCH] drm/i915/ehl: Add power wells support for Elkhart Lake
Vivek Kasireddy
vivek.kasireddy at intel.com
Sat Jun 15 02:06:49 UTC 2019
The number of power wells and the relevant sequences are common between
ICL and EHL since they both are Gen 11. The only significant differences
are that EHL does not have DDI E and DDI D and type C/TBT ports.
Cc: Clint Taylor <clinton.a.taylor at intel.com>
Cc: José Roberto de Souza <jose.souza at intel.com>
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Imre Deak <imre.deak at intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy at intel.com>
---
drivers/gpu/drm/i915/intel_display_power.c | 210 ++++++++++++++++++++-
1 file changed, 209 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_display_power.c b/drivers/gpu/drm/i915/intel_display_power.c
index c672c8080a93..e3ed77b843d2 100644
--- a/drivers/gpu/drm/i915/intel_display_power.c
+++ b/drivers/gpu/drm/i915/intel_display_power.c
@@ -2397,6 +2397,66 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
#define ICL_AUX_TBT4_IO_POWER_DOMAINS ( \
BIT_ULL(POWER_DOMAIN_AUX_TBT4))
+#define EHL_PW_4_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PIPE_C) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_C_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+ /* VDSC/joining */
+#define EHL_PW_3_POWER_DOMAINS ( \
+ EHL_PW_4_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_PIPE_B) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_A) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_B) | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_C) | \
+ BIT_ULL(POWER_DOMAIN_PIPE_B_PANEL_FITTER) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_B_LANES) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_B_IO) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_C_LANES) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_C_IO) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_D_LANES) | \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_D_IO) | \
+ BIT_ULL(POWER_DOMAIN_AUX_B) | \
+ BIT_ULL(POWER_DOMAIN_AUX_C) | \
+ BIT_ULL(POWER_DOMAIN_AUX_D) | \
+ BIT_ULL(POWER_DOMAIN_VGA) | \
+ BIT_ULL(POWER_DOMAIN_AUDIO) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+ /*
+ * - transcoder WD
+ * - KVMR (HW control)
+ */
+#define EHL_PW_2_POWER_DOMAINS ( \
+ EHL_PW_3_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_TRANSCODER_EDP_VDSC) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+ /*
+ * - KVMR (HW control)
+ */
+#define EHL_DISPLAY_DC_OFF_POWER_DOMAINS ( \
+ EHL_PW_2_POWER_DOMAINS | \
+ BIT_ULL(POWER_DOMAIN_MODESET) | \
+ BIT_ULL(POWER_DOMAIN_AUX_A) | \
+ BIT_ULL(POWER_DOMAIN_INIT))
+
+#define EHL_DDI_IO_A_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_A_IO))
+#define EHL_DDI_IO_B_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_B_IO))
+#define EHL_DDI_IO_C_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_C_IO))
+#define EHL_DDI_IO_D_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_PORT_DDI_D_IO))
+
+#define EHL_AUX_A_IO_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_AUX_IO_A) | \
+ BIT_ULL(POWER_DOMAIN_AUX_A))
+#define EHL_AUX_B_IO_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_AUX_B))
+#define EHL_AUX_C_IO_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_AUX_C))
+#define EHL_AUX_D_IO_POWER_DOMAINS ( \
+ BIT_ULL(POWER_DOMAIN_AUX_D))
+
static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
.sync_hw = i9xx_power_well_sync_hw_noop,
.enable = i9xx_always_on_power_well_noop,
@@ -3354,6 +3414,152 @@ static const struct i915_power_well_desc icl_power_wells[] = {
},
};
+static const struct i915_power_well_desc ehl_power_wells[] = {
+ {
+ .name = "always-on",
+ .always_on = true,
+ .domains = POWER_DOMAIN_MASK,
+ .ops = &i9xx_always_on_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ },
+ {
+ .name = "power well 1",
+ /* Handled by the DMC firmware */
+ .always_on = true,
+ .domains = 0,
+ .ops = &hsw_power_well_ops,
+ .id = SKL_DISP_PW_1,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_1,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "DC off",
+ .domains = EHL_DISPLAY_DC_OFF_POWER_DOMAINS,
+ .ops = &gen9_dc_off_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ },
+ {
+ .name = "power well 2",
+ .domains = EHL_PW_2_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = SKL_DISP_PW_2,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_2,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "power well 3",
+ .domains = EHL_PW_3_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_3,
+ .hsw.irq_pipe_mask = BIT(PIPE_B),
+ .hsw.has_vga = true,
+ .hsw.has_fuses = true,
+ },
+ },
+ {
+ .name = "DDI A IO",
+ .domains = EHL_DDI_IO_A_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_A,
+ },
+ },
+ {
+ .name = "DDI B IO",
+ .domains = EHL_DDI_IO_B_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_B,
+ },
+ },
+ {
+ .name = "DDI C IO",
+ .domains = EHL_DDI_IO_C_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_C,
+ },
+ },
+ {
+ .name = "DDI D IO",
+ .domains = EHL_DDI_IO_D_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_ddi_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_DDI_D,
+ },
+ },
+ {
+ .name = "AUX A",
+ .domains = EHL_AUX_A_IO_POWER_DOMAINS,
+ .ops = &icl_combo_phy_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_A,
+ },
+ },
+ {
+ .name = "AUX B",
+ .domains = EHL_AUX_B_IO_POWER_DOMAINS,
+ .ops = &icl_combo_phy_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_B,
+ },
+ },
+ {
+ .name = "AUX C",
+ .domains = EHL_AUX_C_IO_POWER_DOMAINS,
+ .ops = &icl_combo_phy_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_C,
+ },
+ },
+ {
+ .name = "AUX D",
+ .domains = EHL_AUX_D_IO_POWER_DOMAINS,
+ .ops = &icl_combo_phy_aux_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &icl_aux_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_AUX_D,
+ },
+ },
+ {
+ .name = "power well 4",
+ .domains = EHL_PW_4_POWER_DOMAINS,
+ .ops = &hsw_power_well_ops,
+ .id = DISP_PW_ID_NONE,
+ {
+ .hsw.regs = &hsw_power_well_regs,
+ .hsw.idx = ICL_PW_CTL_IDX_PW_4,
+ .hsw.has_fuses = true,
+ .hsw.irq_pipe_mask = BIT(PIPE_C),
+ },
+ },
+};
+
+
static int
sanitize_disable_power_well_option(const struct drm_i915_private *dev_priv,
int disable_power_well)
@@ -3481,8 +3687,10 @@ int intel_power_domains_init(struct drm_i915_private *dev_priv)
* The enabling order will be from lower to higher indexed wells,
* the disabling order is reversed.
*/
- if (IS_GEN(dev_priv, 11)) {
+ if (IS_ICELAKE(dev_priv)) {
err = set_power_wells(power_domains, icl_power_wells);
+ } else if (IS_ELKHARTLAKE(dev_priv)) {
+ err = set_power_wells(power_domains, ehl_power_wells);
} else if (IS_CANNONLAKE(dev_priv)) {
err = set_power_wells(power_domains, cnl_power_wells);
--
2.21.0
More information about the Intel-gfx
mailing list