[Intel-gfx] [PATCH v9 2/2] drm/i915: update cursors asynchronously through atomic
Helen Koike
helen.koike at collabora.com
Mon Jun 17 21:38:54 UTC 2019
From: Gustavo Padovan <gustavo.padovan at collabora.com>
Replace the legacy cursor implementation by the async callbacks
Signed-off-by: Gustavo Padovan <gustavo.padovan at collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo at collabora.com>
Signed-off-by: Helen Koike <helen.koike at collabora.com>
---
Changes in v9:
- v8: https://patchwork.kernel.org/patch/10843397/
- rebased and fixed conflicts on top of drm-tip
Changes in v8:
- v7: https://lkml.org/lkml/2018/6/8/168
- v7 was splited in two, one that adds the async callbacks and another
that updates the cursor.
- Update comment in intel_pm.c that was referencing
intel_plane_atomic_async_update()
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
drivers/gpu/drm/i915/display/intel_display.c | 165 +------------------
drivers/gpu/drm/i915/intel_pm.c | 2 +-
2 files changed, 6 insertions(+), 161 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index bf505b70a037..8aee8f0f83cb 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -13505,6 +13505,10 @@ static int intel_atomic_check(struct drm_device *dev,
if (ret)
goto fail;
+ if (_state->legacy_cursor_update)
+ _state->async_update = !drm_atomic_helper_async_check(dev,
+ _state);
+
intel_fbc_choose_crtc(dev_priv, state);
ret = calc_watermark_data(state);
if (ret)
@@ -14022,34 +14026,6 @@ static int intel_atomic_commit(struct drm_device *dev,
i915_sw_fence_init(&intel_state->commit_ready,
intel_atomic_commit_ready);
- /*
- * The intel_legacy_cursor_update() fast path takes care
- * of avoiding the vblank waits for simple cursor
- * movement and flips. For cursor on/off and size changes,
- * we want to perform the vblank waits so that watermark
- * updates happen during the correct frames. Gen9+ have
- * double buffered watermarks and so shouldn't need this.
- *
- * Unset state->legacy_cursor_update before the call to
- * drm_atomic_helper_setup_commit() because otherwise
- * drm_atomic_helper_wait_for_flip_done() is a noop and
- * we get FIFO underruns because we didn't wait
- * for vblank.
- *
- * FIXME doing watermarks and fb cleanup from a vblank worker
- * (assuming we had any) would solve these problems.
- */
- if (INTEL_GEN(dev_priv) < 9 && state->legacy_cursor_update) {
- struct intel_crtc_state *new_crtc_state;
- struct intel_crtc *crtc;
- int i;
-
- for_each_new_intel_crtc_in_state(intel_state, crtc, new_crtc_state, i)
- if (new_crtc_state->wm.need_postvbl_update ||
- new_crtc_state->update_wm_post)
- state->legacy_cursor_update = false;
- }
-
ret = intel_atomic_prepare_commit(dev, state);
if (ret) {
DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
@@ -14555,139 +14531,8 @@ static const struct drm_plane_funcs i8xx_plane_funcs = {
.format_mod_supported = i8xx_plane_format_mod_supported,
};
-static int
-intel_legacy_cursor_update(struct drm_plane *plane,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- u32 src_x, u32 src_y,
- u32 src_w, u32 src_h,
- struct drm_modeset_acquire_ctx *ctx)
-{
- struct drm_i915_private *dev_priv = to_i915(crtc->dev);
- int ret;
- struct drm_plane_state *old_plane_state, *new_plane_state;
- struct intel_plane *intel_plane = to_intel_plane(plane);
- struct drm_framebuffer *old_fb;
- struct intel_crtc_state *crtc_state =
- to_intel_crtc_state(crtc->state);
- struct intel_crtc_state *new_crtc_state;
-
- /*
- * When crtc is inactive or there is a modeset pending,
- * wait for it to complete in the slowpath
- */
- if (!crtc_state->base.active || needs_modeset(&crtc_state->base) ||
- crtc_state->update_pipe)
- goto slow;
-
- old_plane_state = plane->state;
- /*
- * Don't do an async update if there is an outstanding commit modifying
- * the plane. This prevents our async update's changes from getting
- * overridden by a previous synchronous update's state.
- */
- if (old_plane_state->commit &&
- !try_wait_for_completion(&old_plane_state->commit->hw_done))
- goto slow;
-
- /*
- * If any parameters change that may affect watermarks,
- * take the slowpath. Only changing fb or position should be
- * in the fastpath.
- */
- if (old_plane_state->crtc != crtc ||
- old_plane_state->src_w != src_w ||
- old_plane_state->src_h != src_h ||
- old_plane_state->crtc_w != crtc_w ||
- old_plane_state->crtc_h != crtc_h ||
- !old_plane_state->fb != !fb)
- goto slow;
-
- new_plane_state = intel_plane_duplicate_state(plane);
- if (!new_plane_state)
- return -ENOMEM;
-
- new_crtc_state = to_intel_crtc_state(intel_crtc_duplicate_state(crtc));
- if (!new_crtc_state) {
- ret = -ENOMEM;
- goto out_free;
- }
-
- drm_atomic_set_fb_for_plane(new_plane_state, fb);
-
- new_plane_state->src_x = src_x;
- new_plane_state->src_y = src_y;
- new_plane_state->src_w = src_w;
- new_plane_state->src_h = src_h;
- new_plane_state->crtc_x = crtc_x;
- new_plane_state->crtc_y = crtc_y;
- new_plane_state->crtc_w = crtc_w;
- new_plane_state->crtc_h = crtc_h;
-
- ret = intel_plane_atomic_check_with_state(crtc_state, new_crtc_state,
- to_intel_plane_state(old_plane_state),
- to_intel_plane_state(new_plane_state));
- if (ret)
- goto out_free;
-
- ret = mutex_lock_interruptible(&dev_priv->drm.struct_mutex);
- if (ret)
- goto out_free;
-
- ret = intel_plane_pin_fb(to_intel_plane_state(new_plane_state));
- if (ret)
- goto out_unlock;
-
- intel_fb_obj_flush(intel_fb_obj(fb), ORIGIN_FLIP);
-
- old_fb = old_plane_state->fb;
- i915_gem_track_fb(intel_fb_obj(old_fb), intel_fb_obj(fb),
- intel_plane->frontbuffer_bit);
-
- /* Swap plane state */
- plane->state = new_plane_state;
-
- /*
- * We cannot swap crtc_state as it may be in use by an atomic commit or
- * page flip that's running simultaneously. If we swap crtc_state and
- * destroy the old state, we will cause a use-after-free there.
- *
- * Only update active_planes, which is needed for our internal
- * bookkeeping. Either value will do the right thing when updating
- * planes atomically. If the cursor was part of the atomic update then
- * we would have taken the slowpath.
- */
- crtc_state->active_planes = new_crtc_state->active_planes;
-
- if (plane->state->visible)
- intel_update_plane(intel_plane, crtc_state,
- to_intel_plane_state(plane->state));
- else
- intel_disable_plane(intel_plane, crtc_state);
-
- intel_plane_unpin_fb(to_intel_plane_state(old_plane_state));
-
-out_unlock:
- mutex_unlock(&dev_priv->drm.struct_mutex);
-out_free:
- if (new_crtc_state)
- intel_crtc_destroy_state(crtc, &new_crtc_state->base);
- if (ret)
- intel_plane_destroy_state(plane, new_plane_state);
- else
- intel_plane_destroy_state(plane, old_plane_state);
- return ret;
-
-slow:
- return drm_atomic_helper_update_plane(plane, crtc, fb,
- crtc_x, crtc_y, crtc_w, crtc_h,
- src_x, src_y, src_w, src_h, ctx);
-}
-
static const struct drm_plane_funcs intel_cursor_plane_funcs = {
- .update_plane = intel_legacy_cursor_update,
+ .update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = intel_plane_destroy,
.atomic_duplicate_state = intel_plane_duplicate_state,
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d9a7a13ce32a..bf378197f59f 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -825,7 +825,7 @@ static bool intel_wm_plane_visible(const struct intel_crtc_state *crtc_state,
* can happen faster than the vrefresh rate, and the current
* watermark code doesn't handle that correctly. Cursor updates
* which set/clear the fb or change the cursor size are going
- * to get throttled by intel_legacy_cursor_update() to work
+ * to get throttled by intel_plane_atomic_async_update() to work
* around this problem with the watermark code.
*/
if (plane->id == PLANE_CURSOR)
--
2.20.1
More information about the Intel-gfx
mailing list