[Intel-gfx] [PATCH 03/10] i915:Added DC3CO power well.

Anshuman Gupta anshuman.gupta at intel.com
Fri Jun 28 13:07:47 UTC 2019


This patch adds a new "DC3CO Off" power well and adds
its power domain which are inherits from "DC Off" power well.
These power domains will disallow DC3CO when any external
display are connected and at time of modeset and aux
programming.
This patch also changes "DC Off" power well to "DC5 Off" power well.

v2: commit log improvement.
v3: Used intel_wait_for_register to wait for DC3CO exit. [Imre]
    Used gen9_set_dc_state() to allow/disallow DC3CO. [Imre]
    Moved transcoder psr2 exit line enablement from tgl_allow_dc3co()
    to a appropriate place haswell_crtc_enable(). [Imre]
    Changed the DC3CO power well enabled call back logic as
    recommended in review comments. [Imre]
Cc: jani.nikula at intel.com
Cc: imre.deak at intel.com
Cc: rodrigo.vivi at intel.com
Cc: animesh.manna at intel.com
Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
---
 drivers/gpu/drm/i915/intel_runtime_pm.c | 72 ++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index c860c1107c82..b29761b4f55e 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -1022,6 +1022,31 @@ static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
 	dev_priv->csr.dc_state = val & mask;
 }
 
+static void tgl_allow_dc3co(struct drm_i915_private *dev_priv)
+{
+	gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
+}
+
+static void tgl_disallow_dc3co(struct drm_i915_private *dev_priv)
+{
+	u32 val;
+
+	val = I915_READ(DC_STATE_EN);
+	val &= ~DC_STATE_DC3CO_STATUS;
+	I915_WRITE(DC_STATE_EN, val);
+	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+	/*
+	 * Delay of 200us DC3CO Exit time B.Spec 49196
+	 * It is not necessary that DC3CO exit will completed
+	 * every time, when we disallow DC3CO.
+	 * it might not get chance to enter DC3CO earlier.
+	 */
+	if (intel_wait_for_register(&dev_priv->uncore, DC_STATE_EN,
+				    DC_STATE_DC3CO_STATUS,
+				    DC_STATE_DC3CO_STATUS, 1))
+		DRM_DEBUG_KMS("Timed out waiting for dc3co exit\n");
+}
+
 void bxt_enable_dc9(struct drm_i915_private *dev_priv)
 {
 	assert_can_enable_dc9(dev_priv);
@@ -1238,6 +1263,33 @@ static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
 		gen9_enable_dc5(dev_priv);
 }
 
+static void tgl_dc3co_power_well_enable(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	tgl_disallow_dc3co(dev_priv);
+}
+
+static void tgl_dc3co_power_well_disable(struct drm_i915_private *dev_priv,
+					 struct i915_power_well *power_well)
+{
+	if (WARN_ON(!dev_priv->psr.sink_psr2_support))
+		return;
+
+	if (dev_priv->csr.allowed_dc_mask & DC_STATE_EN_DC3CO)
+		tgl_allow_dc3co(dev_priv);
+}
+
+static bool tgl_dc3co_power_well_enabled(struct drm_i915_private *dev_priv,
+					 struct i915_power_well *power_well)
+{
+	/*
+	 * Checking alone DC_STATE_EN is not enough as DC5 power well also
+	 * allow/disallow DC3CO to make sure both are not enabled at same time
+	 */
+	return ((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 &&
+		(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0);
+}
+
 static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
 					 struct i915_power_well *power_well)
 {
@@ -2740,6 +2792,11 @@ void intel_display_power_put(struct drm_i915_private *dev_priv,
 	ICL_PW_3_POWER_DOMAINS |			\
 	BIT_ULL(POWER_DOMAIN_TRANSCODER_EDP_VDSC) |		\
 	BIT_ULL(POWER_DOMAIN_INIT))
+#define TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS (		\
+	ICL_PW_2_POWER_DOMAINS |			\
+	BIT_ULL(POWER_DOMAIN_MODESET) |			\
+	BIT_ULL(POWER_DOMAIN_AUX_A) |			\
+	BIT_ULL(POWER_DOMAIN_INIT))
 	/*
 	 * - KVMR (HW control)
 	 */
@@ -2852,6 +2909,13 @@ static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
 	.is_enabled = gen9_dc_off_power_well_enabled,
 };
 
+static const struct i915_power_well_ops tgl_dc3co_power_well_ops = {
+	.sync_hw = i9xx_power_well_sync_hw_noop,
+	.enable = tgl_dc3co_power_well_enable,
+	.disable = tgl_dc3co_power_well_disable,
+	.is_enabled = tgl_dc3co_power_well_enabled,
+};
+
 static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
 	.sync_hw = i9xx_power_well_sync_hw_noop,
 	.enable = bxt_dpio_cmn_power_well_enable,
@@ -3530,11 +3594,17 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 		},
 	},
 	{
-		.name = "DC off",
+		.name = "DC5 off",
 		.domains = ICL_DISPLAY_DC_OFF_POWER_DOMAINS,
 		.ops = &gen9_dc_off_power_well_ops,
 		.id = DISP_PW_ID_NONE,
 	},
+	{
+		.name = "DC3CO off",
+		.domains = TGL_DISPLAY_DC3CO_OFF_POWER_DOMAINS,
+		.ops = &tgl_dc3co_power_well_ops,
+		.id = DISP_PW_ID_NONE,
+	},
 	{
 		.name = "power well 2",
 		.domains = ICL_PW_2_POWER_DOMAINS,
-- 
2.21.0



More information about the Intel-gfx mailing list