[Intel-gfx] [PATCH 3/3] drm/i915: Pass dev_priv to intel_is_dual_link_lvds()
Ville Syrjala
ville.syrjala at linux.intel.com
Mon Mar 18 20:26:53 UTC 2019
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Make things look a bit nicer by passing dev_priv to
intel_is_dual_link_lvds().
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 28 ++++++++++++----------------
drivers/gpu/drm/i915/intel_drv.h | 2 +-
drivers/gpu/drm/i915/intel_lvds.c | 4 ++--
3 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bfe792789a52..ff807277d2fe 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -595,7 +595,7 @@ i9xx_select_p2_div(const struct intel_limit *limit,
const struct intel_crtc_state *crtc_state,
int target)
{
- struct drm_device *dev = crtc_state->base.crtc->dev;
+ struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
/*
@@ -603,7 +603,7 @@ i9xx_select_p2_div(const struct intel_limit *limit,
* We haven't figured out how to reliably set up different
* single/dual channel state, if we even can.
*/
- if (intel_is_dual_link_lvds(dev))
+ if (intel_is_dual_link_lvds(dev_priv))
return limit->p2.p2_fast;
else
return limit->p2.p2_slow;
@@ -6872,8 +6872,7 @@ static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
static int intel_crtc_compute_config(struct intel_crtc *crtc,
struct intel_crtc_state *pipe_config)
{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
int clock_limit = dev_priv->max_dotclk_freq;
@@ -6923,7 +6922,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
}
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
- intel_is_dual_link_lvds(dev)) {
+ intel_is_dual_link_lvds(dev_priv)) {
DRM_DEBUG_KMS("Odd pipe source width not supported with dual link LVDS\n");
return -EINVAL;
}
@@ -7813,8 +7812,7 @@ static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct intel_limit *limit;
int refclk = 96000;
@@ -7827,7 +7825,7 @@ static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
}
- if (intel_is_dual_link_lvds(dev))
+ if (intel_is_dual_link_lvds(dev_priv))
limit = &intel_limits_g4x_dual_channel_lvds;
else
limit = &intel_limits_g4x_single_channel_lvds;
@@ -8861,13 +8859,11 @@ static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
}
-static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
+static void ironlake_compute_dpll(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state,
struct dpll *reduced_clock)
{
- struct drm_crtc *crtc = &intel_crtc->base;
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
u32 dpll, fp, fp2;
int factor;
@@ -8876,7 +8872,8 @@ static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
if ((intel_panel_use_ssc(dev_priv) &&
dev_priv->vbt.lvds_ssc_freq == 100000) ||
- (HAS_PCH_IBX(dev_priv) && intel_is_dual_link_lvds(dev)))
+ (HAS_PCH_IBX(dev_priv) &&
+ intel_is_dual_link_lvds(dev_priv)))
factor = 25;
} else if (crtc_state->sdvo_tv_clock) {
factor = 20;
@@ -8967,8 +8964,7 @@ static void ironlake_compute_dpll(struct intel_crtc *intel_crtc,
static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
struct intel_crtc_state *crtc_state)
{
- struct drm_device *dev = crtc->base.dev;
- struct drm_i915_private *dev_priv = to_i915(dev);
+ struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
const struct intel_limit *limit;
int refclk = 120000;
@@ -8986,7 +8982,7 @@ static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
refclk = dev_priv->vbt.lvds_ssc_freq;
}
- if (intel_is_dual_link_lvds(dev)) {
+ if (intel_is_dual_link_lvds(dev_priv)) {
if (refclk == 100000)
limit = &intel_limits_ironlake_dual_lvds_100m;
else
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ac8a67ba704d..1711a717ee23 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -2118,7 +2118,7 @@ bool intel_lvds_port_enabled(struct drm_i915_private *dev_priv,
i915_reg_t lvds_reg, enum pipe *pipe);
void intel_lvds_init(struct drm_i915_private *dev_priv);
struct intel_encoder *intel_get_lvds_encoder(struct drm_i915_private *dev_priv);
-bool intel_is_dual_link_lvds(struct drm_device *dev);
+bool intel_is_dual_link_lvds(struct drm_i915_private *dev_priv);
/* intel_overlay.c */
void intel_overlay_setup(struct drm_i915_private *dev_priv);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 306bc321fdaa..845792aa0abe 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -754,9 +754,9 @@ struct intel_encoder *intel_get_lvds_encoder(struct drm_i915_private *dev_priv)
return NULL;
}
-bool intel_is_dual_link_lvds(struct drm_device *dev)
+bool intel_is_dual_link_lvds(struct drm_i915_private *dev_priv)
{
- struct intel_encoder *encoder = intel_get_lvds_encoder(to_i915(dev));
+ struct intel_encoder *encoder = intel_get_lvds_encoder(dev_priv);
return encoder && to_lvds_encoder(&encoder->base)->is_dual_link;
}
--
2.19.2
More information about the Intel-gfx
mailing list