[Intel-gfx] [PATCH v7 4/4] drm/i915: Skip modeset for cdclk changes if possible
Imre Deak
imre.deak at intel.com
Tue Mar 19 18:36:18 UTC 2019
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.
v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar at intel.com>
Tested-by: Abhay Kumar <abhay.kumar at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
drivers/gpu/drm/i915/i915_drv.h | 3 +-
drivers/gpu/drm/i915/i915_reg.h | 3 +-
drivers/gpu/drm/i915/intel_cdclk.c | 142 +++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_display.c | 41 +++++++++-
drivers/gpu/drm/i915/intel_drv.h | 17 ++++-
5 files changed, 169 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6b10cee4e77f..d8f91525c94c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -277,7 +277,8 @@ struct drm_i915_display_funcs {
void (*get_cdclk)(struct drm_i915_private *dev_priv,
struct intel_cdclk_state *cdclk_state);
void (*set_cdclk)(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state);
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe);
int (*get_fifo_size)(struct drm_i915_private *dev_priv,
enum i9xx_plane_id i9xx_plane);
int (*compute_pipe_wm)(struct intel_crtc_state *cstate);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9b69cec21f7b..12b8170ced96 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9521,7 +9521,8 @@ enum skl_power_gate {
#define BXT_CDCLK_CD2X_PIPE(pipe) ((pipe) << 20)
#define CDCLK_DIVMUX_CD_OVERRIDE (1 << 19)
#define BXT_CDCLK_CD2X_PIPE_NONE BXT_CDCLK_CD2X_PIPE(3)
-#define ICL_CDCLK_CD2X_PIPE_NONE (7 << 19)
+#define ICL_CDCLK_CD2X_PIPE(pipe) ((pipe) << 19)
+#define ICL_CDCLK_CD2X_PIPE_NONE ICL_CDCLK_CD2X_PIPE(7)
#define BXT_CDCLK_SSA_PRECHARGE_ENABLE (1 << 16)
#define CDCLK_FREQ_DECIMAL_MASK (0x7ff)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index 97007d76f9a7..068de2d431a8 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -516,7 +516,8 @@ static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
}
static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
u32 val, cmd = cdclk_state->voltage_level;
@@ -598,7 +599,8 @@ static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
}
static void chv_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
u32 val, cmd = cdclk_state->voltage_level;
@@ -697,7 +699,8 @@ static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
}
static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
u32 val;
@@ -987,7 +990,8 @@ static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
}
static void skl_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
int vco = cdclk_state->vco;
@@ -1158,7 +1162,7 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.cdclk = skl_calc_cdclk(0, cdclk_state.vco);
cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
- skl_set_cdclk(dev_priv, &cdclk_state);
+ skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -1176,7 +1180,7 @@ void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = 0;
cdclk_state.voltage_level = skl_calc_voltage_level(cdclk_state.cdclk);
- skl_set_cdclk(dev_priv, &cdclk_state);
+ skl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
static int bxt_calc_cdclk(int min_cdclk)
@@ -1355,7 +1359,8 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
}
static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
int vco = cdclk_state->vco;
@@ -1408,11 +1413,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
bxt_de_pll_enable(dev_priv, vco);
val = divider | skl_cdclk_decimal(cdclk);
- /*
- * FIXME if only the cd2x divider needs changing, it could be done
- * without shutting off the pipe (if only one pipe is active).
- */
- val |= BXT_CDCLK_CD2X_PIPE_NONE;
+ if (pipe == INVALID_PIPE)
+ val |= BXT_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= BXT_CDCLK_CD2X_PIPE(pipe);
/*
* Disable SSA Precharge when CD clock frequency < 500 MHz,
* enable otherwise.
@@ -1421,6 +1425,9 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
I915_WRITE(CDCLK_CTL, val);
+ if (pipe != INVALID_PIPE)
+ intel_wait_for_vblank(dev_priv, pipe);
+
mutex_lock(&dev_priv->pcu_lock);
/*
* The timeout isn't specified, the 2ms used here is based on
@@ -1525,7 +1532,7 @@ void bxt_init_cdclk(struct drm_i915_private *dev_priv)
}
cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
- bxt_set_cdclk(dev_priv, &cdclk_state);
+ bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -1543,7 +1550,7 @@ void bxt_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = 0;
cdclk_state.voltage_level = bxt_calc_voltage_level(cdclk_state.cdclk);
- bxt_set_cdclk(dev_priv, &cdclk_state);
+ bxt_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
static int cnl_calc_cdclk(int min_cdclk)
@@ -1663,7 +1670,8 @@ static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
}
static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
int cdclk = cdclk_state->cdclk;
int vco = cdclk_state->vco;
@@ -1704,13 +1712,15 @@ static void cnl_set_cdclk(struct drm_i915_private *dev_priv,
cnl_cdclk_pll_enable(dev_priv, vco);
val = divider | skl_cdclk_decimal(cdclk);
- /*
- * FIXME if only the cd2x divider needs changing, it could be done
- * without shutting off the pipe (if only one pipe is active).
- */
- val |= BXT_CDCLK_CD2X_PIPE_NONE;
+ if (pipe == INVALID_PIPE)
+ val |= BXT_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= BXT_CDCLK_CD2X_PIPE(pipe);
I915_WRITE(CDCLK_CTL, val);
+ if (pipe != INVALID_PIPE)
+ intel_wait_for_vblank(dev_priv, pipe);
+
/* inform PCU of the change */
mutex_lock(&dev_priv->pcu_lock);
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -1847,10 +1857,12 @@ static int icl_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
}
static void icl_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
unsigned int cdclk = cdclk_state->cdclk;
unsigned int vco = cdclk_state->vco;
+ u32 val;
int ret;
mutex_lock(&dev_priv->pcu_lock);
@@ -1872,8 +1884,15 @@ static void icl_set_cdclk(struct drm_i915_private *dev_priv,
if (dev_priv->cdclk.hw.vco != vco)
cnl_cdclk_pll_enable(dev_priv, vco);
- I915_WRITE(CDCLK_CTL, ICL_CDCLK_CD2X_PIPE_NONE |
- skl_cdclk_decimal(cdclk));
+ val = skl_cdclk_decimal(cdclk);
+ if (pipe == INVALID_PIPE)
+ val |= ICL_CDCLK_CD2X_PIPE_NONE;
+ else
+ val |= ICL_CDCLK_CD2X_PIPE(pipe);
+ I915_WRITE(CDCLK_CTL, val);
+
+ if (pipe != INVALID_PIPE)
+ intel_wait_for_vblank(dev_priv, pipe);
mutex_lock(&dev_priv->pcu_lock);
sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
@@ -2002,7 +2021,7 @@ void icl_init_cdclk(struct drm_i915_private *dev_priv)
sanitized_state.voltage_level =
icl_calc_voltage_level(sanitized_state.cdclk);
- icl_set_cdclk(dev_priv, &sanitized_state);
+ icl_set_cdclk(dev_priv, &sanitized_state, INVALID_PIPE);
}
/**
@@ -2020,7 +2039,7 @@ void icl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = 0;
cdclk_state.voltage_level = icl_calc_voltage_level(cdclk_state.cdclk);
- icl_set_cdclk(dev_priv, &cdclk_state);
+ icl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -2048,7 +2067,7 @@ void cnl_init_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = cnl_cdclk_pll_vco(dev_priv, cdclk_state.cdclk);
cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
- cnl_set_cdclk(dev_priv, &cdclk_state);
+ cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -2066,7 +2085,7 @@ void cnl_uninit_cdclk(struct drm_i915_private *dev_priv)
cdclk_state.vco = 0;
cdclk_state.voltage_level = cnl_calc_voltage_level(cdclk_state.cdclk);
- cnl_set_cdclk(dev_priv, &cdclk_state);
+ cnl_set_cdclk(dev_priv, &cdclk_state, INVALID_PIPE);
}
/**
@@ -2086,6 +2105,27 @@ bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
}
/**
+ * intel_cdclk_needs_cd2x_update - Determine if two CDCLK states require a cd2x divider update
+ * @a: first CDCLK state
+ * @b: second CDCLK state
+ *
+ * Returns:
+ * True if the CDCLK states require just a cd2x divider update, false if not.
+ */
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *a,
+ const struct intel_cdclk_state *b)
+{
+ /* Older hw doesn't have the capability */
+ if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
+ return false;
+
+ return a->cdclk != b->cdclk &&
+ a->vco == b->vco &&
+ a->ref == b->ref;
+}
+
+/**
* intel_cdclk_changed - Determine if two CDCLK states are different
* @a: first CDCLK state
* @b: second CDCLK state
@@ -2139,12 +2179,14 @@ void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
* intel_set_cdclk - Push the CDCLK state to the hardware
* @dev_priv: i915 device
* @cdclk_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
*
* Program the hardware based on the passed in CDCLK state,
* if necessary.
*/
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state)
+static void intel_set_cdclk(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *cdclk_state,
+ enum pipe pipe)
{
if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state))
return;
@@ -2154,7 +2196,7 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
intel_dump_cdclk_state(cdclk_state, "Changing CDCLK to");
- dev_priv->display.set_cdclk(dev_priv, cdclk_state);
+ dev_priv->display.set_cdclk(dev_priv, cdclk_state, pipe);
if (WARN(intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_state),
"cdclk state doesn't match!\n")) {
@@ -2163,6 +2205,46 @@ void intel_set_cdclk(struct drm_i915_private *dev_priv,
}
}
+/**
+ * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware before updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *old_state,
+ const struct intel_cdclk_state *new_state,
+ enum pipe pipe)
+{
+ if (pipe == INVALID_PIPE || old_state->cdclk <= new_state->cdclk)
+ intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
+/**
+ * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
+ * @dev_priv: i915 device
+ * @old_state: old CDCLK state
+ * @new_state: new CDCLK state
+ * @pipe: pipe with which to synchronize the update
+ *
+ * Program the hardware after updating the HW plane state based on the passed
+ * in CDCLK state, if necessary.
+ */
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *old_state,
+ const struct intel_cdclk_state *new_state,
+ enum pipe pipe)
+{
+ if (pipe != INVALID_PIPE && old_state->cdclk > new_state->cdclk)
+ intel_set_cdclk(dev_priv, new_state, pipe);
+}
+
static int intel_pixel_rate_to_cdclk(struct drm_i915_private *dev_priv,
int pixel_rate)
{
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f7b44773e1e7..d24959d76317 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -12982,6 +12982,7 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
intel_state->active_crtcs = dev_priv->active_crtcs;
intel_state->cdclk.logical = dev_priv->cdclk.logical;
intel_state->cdclk.actual = dev_priv->cdclk.actual;
+ intel_state->cdclk.pipe = INVALID_PIPE;
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
if (new_crtc_state->active)
@@ -13001,6 +13002,8 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
* adjusted_mode bits in the crtc directly.
*/
if (dev_priv->display.modeset_calc_cdclk) {
+ enum pipe pipe;
+
ret = dev_priv->display.modeset_calc_cdclk(state);
if (ret < 0)
return ret;
@@ -13017,12 +13020,36 @@ static int intel_modeset_checks(struct drm_atomic_state *state)
return ret;
}
+ if (is_power_of_2(intel_state->active_crtcs)) {
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+
+ pipe = ilog2(intel_state->active_crtcs);
+ crtc = &intel_get_crtc_for_pipe(dev_priv, pipe)->base;
+ crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+ if (crtc_state && needs_modeset(crtc_state))
+ pipe = INVALID_PIPE;
+ } else {
+ pipe = INVALID_PIPE;
+ }
+
/* All pipes must be switched off while we change the cdclk. */
- if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
- &intel_state->cdclk.actual)) {
+ if (pipe != INVALID_PIPE &&
+ intel_cdclk_needs_cd2x_update(dev_priv,
+ &dev_priv->cdclk.actual,
+ &intel_state->cdclk.actual)) {
+ ret = intel_lock_all_pipes(state);
+ if (ret < 0)
+ return ret;
+
+ intel_state->cdclk.pipe = pipe;
+ } else if (intel_cdclk_needs_modeset(&dev_priv->cdclk.actual,
+ &intel_state->cdclk.actual)) {
ret = intel_modeset_all_pipes(state);
if (ret < 0)
return ret;
+
+ intel_state->cdclk.pipe = INVALID_PIPE;
}
DRM_DEBUG_KMS("New cdclk calculated to be logical %u kHz, actual %u kHz\n",
@@ -13431,7 +13458,10 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
if (intel_state->modeset) {
drm_atomic_helper_update_legacy_modeset_state(state->dev, state);
- intel_set_cdclk(dev_priv, &dev_priv->cdclk.actual);
+ intel_set_cdclk_pre_plane_update(dev_priv,
+ &intel_state->cdclk.actual,
+ &dev_priv->cdclk.actual,
+ intel_state->cdclk.pipe);
/*
* SKL workaround: bspec recommends we disable the SAGV when we
@@ -13460,6 +13490,11 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
/* Now enable the clocks, plane, pipe, and connectors that we set up. */
dev_priv->display.update_crtcs(state);
+ intel_set_cdclk_post_plane_update(dev_priv,
+ &intel_state->cdclk.actual,
+ &dev_priv->cdclk.actual,
+ intel_state->cdclk.pipe);
+
/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
* already, but still need the state for the delayed optimization. To
* fix this:
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 85dd6a9d1e42..d22a0e92e0d4 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -559,6 +559,8 @@ struct intel_atomic_state {
int force_min_cdclk;
bool force_min_cdclk_changed;
+ /* pipe to which cd2x update is synchronized */
+ enum pipe pipe;
} cdclk;
bool dpll_set, modeset;
@@ -1694,13 +1696,24 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv);
void intel_update_max_cdclk(struct drm_i915_private *dev_priv);
void intel_update_cdclk(struct drm_i915_private *dev_priv);
void intel_update_rawclk(struct drm_i915_private *dev_priv);
+bool intel_cdclk_needs_cd2x_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *a,
+ const struct intel_cdclk_state *b);
bool intel_cdclk_needs_modeset(const struct intel_cdclk_state *a,
const struct intel_cdclk_state *b);
bool intel_cdclk_changed(const struct intel_cdclk_state *a,
const struct intel_cdclk_state *b);
void intel_cdclk_swap_state(struct intel_atomic_state *state);
-void intel_set_cdclk(struct drm_i915_private *dev_priv,
- const struct intel_cdclk_state *cdclk_state);
+void
+intel_set_cdclk_pre_plane_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *old_state,
+ const struct intel_cdclk_state *new_state,
+ enum pipe pipe);
+void
+intel_set_cdclk_post_plane_update(struct drm_i915_private *dev_priv,
+ const struct intel_cdclk_state *old_state,
+ const struct intel_cdclk_state *new_state,
+ enum pipe pipe);
void intel_dump_cdclk_state(const struct intel_cdclk_state *cdclk_state,
const char *context);
--
2.13.2
More information about the Intel-gfx
mailing list