[Intel-gfx] [PATCH 7/8] drm/i915: Remove unused VLV/CHV PSR registers

[José Roberto de Souza]

PSR support for VLV and CHV was dropped in commit ce3508fd2a77
("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep
this registers around.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h | 36 ---------------------------------
 1 file changed, 36 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3c382aee2fec..a10475b0e336 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4209,42 +4209,6 @@ enum {
 #define PIPESRC(trans)		_MMIO_TRANS2(trans, _PIPEASRC)
 #define PIPE_MULT(trans)	_MMIO_TRANS2(trans, _PIPE_MULT_A)
 
-/* VLV eDP PSR registers */
-#define _PSRCTLA				(VLV_DISPLAY_BASE + 0x60090)
-#define _PSRCTLB				(VLV_DISPLAY_BASE + 0x61090)
-#define  VLV_EDP_PSR_ENABLE			(1 << 0)
-#define  VLV_EDP_PSR_RESET			(1 << 1)
-#define  VLV_EDP_PSR_MODE_MASK			(7 << 2)
-#define  VLV_EDP_PSR_MODE_HW_TIMER		(1 << 3)
-#define  VLV_EDP_PSR_MODE_SW_TIMER		(1 << 2)
-#define  VLV_EDP_PSR_SINGLE_FRAME_UPDATE	(1 << 7)
-#define  VLV_EDP_PSR_ACTIVE_ENTRY		(1 << 8)
-#define  VLV_EDP_PSR_SRC_TRANSMITTER_STATE	(1 << 9)
-#define  VLV_EDP_PSR_DBL_FRAME			(1 << 10)
-#define  VLV_EDP_PSR_FRAME_COUNT_MASK		(0xff << 16)
-#define  VLV_EDP_PSR_IDLE_FRAME_SHIFT		16
-#define VLV_PSRCTL(pipe)	_MMIO_PIPE(pipe, _PSRCTLA, _PSRCTLB)
-
-#define _VSCSDPA			(VLV_DISPLAY_BASE + 0x600a0)
-#define _VSCSDPB			(VLV_DISPLAY_BASE + 0x610a0)
-#define  VLV_EDP_PSR_SDP_FREQ_MASK	(3 << 30)
-#define  VLV_EDP_PSR_SDP_FREQ_ONCE	(1 << 31)
-#define  VLV_EDP_PSR_SDP_FREQ_EVFRAME	(1 << 30)
-#define VLV_VSCSDP(pipe)	_MMIO_PIPE(pipe, _VSCSDPA, _VSCSDPB)
-
-#define _PSRSTATA			(VLV_DISPLAY_BASE + 0x60094)
-#define _PSRSTATB			(VLV_DISPLAY_BASE + 0x61094)
-#define  VLV_EDP_PSR_LAST_STATE_MASK	(7 << 3)
-#define  VLV_EDP_PSR_CURR_STATE_MASK	7
-#define  VLV_EDP_PSR_DISABLED		(0 << 0)
-#define  VLV_EDP_PSR_INACTIVE		(1 << 0)
-#define  VLV_EDP_PSR_IN_TRANS_TO_ACTIVE	(2 << 0)
-#define  VLV_EDP_PSR_ACTIVE_NORFB_UP	(3 << 0)
-#define  VLV_EDP_PSR_ACTIVE_SF_UPDATE	(4 << 0)
-#define  VLV_EDP_PSR_EXIT		(5 << 0)
-#define  VLV_EDP_PSR_IN_TRANS		(1 << 7)
-#define VLV_PSRSTAT(pipe)	_MMIO_PIPE(pipe, _PSRSTATA, _PSRSTATB)
-
 /* HSW+ eDP PSR registers */
 #define HSW_EDP_PSR_BASE	0x64000
 #define EDP_PSR_CTL				_MMIO(dev_priv->psr.mmio_base + 0x800)
-- 
2.21.0