[Intel-gfx] [PATCH 2/2] drm/i915/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports

[Manasi Navare]

On Fri, Mar 22, 2019 at 11:34:25AM +0200, Jani Nikula wrote:
> On Thu, 21 Mar 2019, Manasi Navare <manasi.d.navare at intel.com> wrote:
> > In case of tiled displays where different tiles are displayed across
> > different ports, we need to synchronize the transcoders involved.
> > This patch implements the transcoder port sync feature for
> > synchronizing one master transcoder with one or more slave
> > transcoders. This is only enbaled in slave transcoder
> > and the master transcoder is unaware that it is operating
> > in this mode.
> > This has been tested with tiled display connected to ICL.
> >
> > Cc: Daniel Vetter <daniel.vetter at intel.com>
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> > Cc: Matt Roper <matthew.d.roper at intel.com>
> > Cc: Jani Nikula <jani.nikula at intel.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 59 ++++++++++++++++++++++++++++
> >  1 file changed, 59 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 9980a4ed8c9c..16b46a3cb3bd 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -4009,6 +4009,62 @@ static void icl_set_pipe_chicken(struct intel_crtc *crtc)
> >  	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
> >  }
> >  
> > +static void icl_set_transcoder_port_sync(struct intel_atomic_state *old_intel_state,
> > +					 const struct intel_crtc_state *crtc_state)
> > +{
> > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > +	struct intel_crtc_state *genlock_crtc_state = NULL;
> > +	enum transcoder genlock_transcoder;
> > +	u32 trans_ddi_func_ctl2_val;
> > +	u8 master_select;
> > +
> > +	/*
> > +	 * Port Sync Mode cannot be enabled for DP MST
> > +	 */
> > +	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))
> > +		return;
> > +
> > +	/*
> > +	 * Configure the master select and enable Transcoder Port Sync for
> > +	 * Slave CRTCs transcoder.
> > +	 */
> > +	if (!crtc_state->genlock_crtc)
> > +		return;
> > +
> > +	genlock_crtc_state = intel_atomic_get_new_crtc_state(old_intel_state,
> > +							     crtc_state->genlock_crtc);
> > +	if (WARN_ON(!genlock_crtc_state))
> > +		return;
> > +
> > +	genlock_transcoder = genlock_crtc_state->cpu_transcoder;
> > +	switch (genlock_transcoder) {
> > +	case TRANSCODER_A:
> > +		master_select = 1;
> > +		break;
> > +	case TRANSCODER_B:
> > +		master_select = 2;
> > +		break;
> > +	case TRANSCODER_C:
> > +		master_select = 3;
> > +		break;
> > +	case TRANSCODER_EDP:
> > +	default:
> > +		master_select = 0;
> > +		break;
> > +	}
> > +	/* Set the master select bits for Tranascoder Port Sync */
> > +	trans_ddi_func_ctl2_val = I915_READ(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder));
> > +	trans_ddi_func_ctl2_val |= (PORT_SYNC_MODE_MASTER_SELECT(master_select) &
> > +				    PORT_SYNC_MODE_MASTER_SELECT_MASK) <<
> > +		PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
> 
> This doesn't do what you think it does. ITYM,
> 
> 	val = I915_READ();
>         val &= ~FOO_MASK;
>         val |= FOO_BAR;

Ah, yes I should use the mask to clear the value and then OR the new value.
Will make this change, thanks for pointing this out.

> 
> Please actually use just "val" for the variable, the long name just
> makes this all harder to read.

Okay will change the variable name to val.

Regards
Manasi
> 
> BR,
> Jani.
> 
> 
> > +	/* Enable Transcoder Port Sync */
> > +	trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE;
> > +
> > +	I915_WRITE(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder),
> > +		   trans_ddi_func_ctl2_val);
> > +}
> > +
> >  static void intel_update_pipe_config(const struct intel_crtc_state *old_crtc_state,
> >  				     const struct intel_crtc_state *new_crtc_state)
> >  {
> > @@ -5960,6 +6016,9 @@ static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
> >  	if (!transcoder_is_dsi(cpu_transcoder))
> >  		intel_set_pipe_timings(pipe_config);
> >  
> > +	if (INTEL_GEN(dev_priv) >= 11)
> > +		icl_set_transcoder_port_sync(old_intel_state, pipe_config);
> > +
> >  	intel_set_pipe_src_size(pipe_config);
> >  
> >  	if (cpu_transcoder != TRANSCODER_EDP &&
> 
> -- 
> Jani Nikula, Intel Open Source Graphics Center