[Intel-gfx] [RFC] drm/i915: adding state checker for gamma lut values
Sharma, Swati2
swati2.sharma at intel.com
Mon Mar 25 06:29:39 UTC 2019
On 20-Mar-19 6:11 PM, Jani Nikula wrote:
> On Wed, 20 Mar 2019, "Sharma, Swati2" <swati2.sharma at intel.com> wrote:
>> On 15-Mar-19 3:17 PM, Nikula, Jani wrote:
>>> On Fri, 15 Mar 2019, swati2.sharma at intel.com wrote:
>>>> From: Swati Sharma <swati2.sharma at intel.com>
>>>>
>>>> Added state checker to validate gamma_lut values. This
>>>> reads hardware state, and compares the originally requested
>>>> state to the state read from hardware.
>>>>
>>>> This implementation can be used for Gen9+ platforms,
>>>> I haven't implemented it for legacy platforms. Just want to get
>>>> feedback if this is the right approach to follow.
>>>>
>>>> Also, inverse function of drm_color_lut_extract is missing
>>>> to convert hardware read values back to user values.
>>>> Thinking for that. I have added all "TODOs" and "Placeholders".
>>>>
>>>> Another approach:
>>>> Storing "word" to be written into hardware in dev_priv and
>>>> instead of comparing blob, comparing "word"? In dev_priv,
>>>> only pointer will be there (something like *gamma_word).
>>> You can't store it in dev_priv because it's crtc state specific
>>> data. Even if stored in crtc state, the approach doesn't help the
>>> initial hw state readout and takeover.
>>>
>>> Please use intel-gfx mailing list for i915 patches.
>>>
>>>> For this too, I will send a patch to make it more clear.
>>>>
>>>> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
>>>> ---
>>>> drivers/gpu/drm/i915/i915_drv.h | 1 +
>>>> drivers/gpu/drm/i915/intel_color.c | 127 +++++++++++++++++++++++++++++++++--
>>>> drivers/gpu/drm/i915/intel_display.c | 50 ++++++++++++++
>>>> drivers/gpu/drm/i915/intel_drv.h | 1 +
>>>> 4 files changed, 173 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>>>> index c4ffe19..b41bfaa 100644
>>>> --- a/drivers/gpu/drm/i915/i915_drv.h
>>>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>>>> @@ -334,6 +334,7 @@ struct drm_i915_display_funcs {
>>>> * involved with the same commit.
>>>> */
>>>> void (*load_luts)(const struct intel_crtc_state *crtc_state);
>>>> + void (*get_config)(struct intel_crtc_state *crtc_state);
>>> The name is too generic.
>>>
>>>> };
>>>>
>>>> #define CSR_VERSION(major, minor) ((major) << 16 | (minor))
>>>> diff --git a/drivers/gpu/drm/i915/intel_color.c b/drivers/gpu/drm/i915/intel_color.c
>>>> index da7a07d..a515e9f 100644
>>>> --- a/drivers/gpu/drm/i915/intel_color.c
>>>> +++ b/drivers/gpu/drm/i915/intel_color.c
>>>> @@ -74,6 +74,11 @@
>>>> #define ILK_CSC_COEFF_1_0 \
>>>> ((7 << 12) | ILK_CSC_COEFF_FP(CTM_COEFF_1_0, 8))
>>>>
>>>> +/* Mask to extract RGB values from registers */
>>>> +#define COLOR_BLUE_MASK 0x000003FF /* 9:0 */
>>>> +#define COLOR_GREEN_MASK 0x000FFC00 /* 19:10 */
>>>> +#define COLOR_RED_MASK 0x3FF00000 /* 29:20 */
>>> These belong in i915_reg.h, and you need platform specific shifts and
>>> masks. The code that writes the registers seems to use magic numbers...
>>>
>>>> +
>>>> static bool lut_is_legacy(const struct drm_property_blob *lut)
>>>> {
>>>> return drm_color_lut_size(lut) == LEGACY_LUT_LENGTH;
>>>> @@ -672,6 +677,97 @@ static void cherryview_load_luts(const struct intel_crtc_state *crtc_state)
>>>> i9xx_load_luts_internal(crtc_state, NULL);
>>>> }
>>>>
>>>> +static void bdw_get_gamma_config(struct intel_crtc_state *crtc_state, u32 offset)
>>>> +{
>>>> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
>>>> + struct drm_device *dev = crtc->base.dev;
>>>> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>>>> + u32 i, tmp, lut_size = INTEL_INFO(dev_priv)->color.gamma_lut_size;
>>>> + enum pipe pipe = crtc->pipe;
>>>> + struct drm_property_blob *blob = NULL;
>>>> + struct drm_color_lut *blob_data;
>>>> +
>>>> + WARN_ON(offset & ~PAL_PREC_INDEX_VALUE_MASK);
>>>> +
>>>> + I915_WRITE(PREC_PAL_INDEX(pipe),
>>>> + (offset ? PAL_PREC_SPLIT_MODE : 0) |
>>>> + PAL_PREC_AUTO_INCREMENT |
>>>> + offset);
>>>> +
>>>> + blob = drm_property_create_blob(dev,
>>>> + sizeof(struct drm_color_lut) * lut_size,
>>>> + NULL);
>>>> + if (IS_ERR(blob))
>>>> + return;
>>>> +
>>>> + blob_data = blob->data;
>>>> +
>>>> + for (i = 0; i < lut_size; i++) {
>>>> + tmp = I915_READ(PREC_PAL_DATA(pipe));
>>>> + /*
>>>> + * TODO: convert RGB value read from register into corresponding user value using
>>>> + * some wrapper like drm_color_lut_put() (or) intel_color_lut_put() so that it
>>>> + * can be compared later.
>>>> + */
>>> Yeah, you'll need this.
>> Can you please help in this?
> Something like this:
>
> /* convert hw value with given bit_precision to lut property val */
> u32 drm_color_lut_pack(u32 val, u32 bit_precision)
> {
> u32 max = 0xffff >> (16 - bit_precision);
>
> val = clamp_val(val, 0, max);
>
> if (bit_precision < 16)
> val <<= 16 - bit_precision;
>
> return val;
> }
>
> /* compare two lut property values with given bit_precision */
> bool drm_color_lut_match(u32 a, u32 b, u32 bit_precision)
> {
> u32 err = 0xffff >> bit_precision;
>
> return abs((long)a - b) <= err;
> }
>
> I didn't double check the math, but it's probably close enough for
> starters. ;)
>
>
>
> BR,
> Jani.
Hi Jani,
Since we are not having apple to apple comparison, can't it leave some
corner cases? We are not comparing data which is being written into h/w
exactly to what is being read. For instance during round off we may take
the ceiling value of RGB data, while reading register if we get the
floor value of RGB data, this logic might not catch the issue coz the
abs difference from the actual RGB value may fall inside the error range
but still individual values won't be equal.
So, is it the only way to proceed?
>
>
>
>>>> + blob_data[i].red = (tmp & COLOR_RED_MASK) >> 20;
>>>> + blob_data[i].green = (tmp & COLOR_GREEN_MASK) >> 10;
>>>> + blob_data[i].blue = tmp & COLOR_BLUE_MASK;
>>>> + }
>>>> +
>>>> + I915_WRITE(PREC_PAL_INDEX(pipe), 0);
>>>> +
>>>> + crtc_state->base.gamma_lut = blob;
>>>> +}
>>>> +
>>>> +static void i9xx_get_config(struct intel_crtc_state *crtc_state)
>>> Please include (de)gamma or color in the function names.
>>>
>>>> +{
>>>> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
>>>> + struct drm_device *dev = crtc->base.dev;
>>>> + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>>>> + u32 i, tmp;
>>>> + enum pipe pipe = crtc->pipe;
>>>> + struct drm_property_blob *blob = NULL;
>>>> + struct drm_color_lut *blob_data;
>>>> +
>>>> + blob = drm_property_create_blob(dev,
>>>> + sizeof(struct drm_color_lut) * 256,
>>>> + NULL);
>>>> + if (IS_ERR(blob))
>>>> + return;
>>>> +
>>>> + blob_data = blob->data;
>>>> +
>>>> + for (i = 0; i < 256; i++) {
>>>> + if (HAS_GMCH(dev_priv))
>>>> + tmp = I915_READ(PALETTE(pipe, i));
>>>> + else
>>>> + tmp = I915_READ(LGC_PALETTE(pipe, i));
>>>> + /*
>>>> + * TODO: convert RGB value read from register into corresponding user value using
>>>> + * some wrapper like drm_color_lut_put() (or) intel_color_lut_put() so that it
>>>> + * can be compared later.
>>>> + */
>>>> + blob_data[i].red = (tmp & COLOR_RED_MASK) >> 20;
>>>> + blob_data[i].green = (tmp & COLOR_GREEN_MASK) >> 10;
>>>> + blob_data[i].blue = (tmp & COLOR_BLUE_MASK);
>>>> + }
>>>> +
>>>> + crtc_state->base.gamma_lut = blob;
>>>> +}
>>>> +
>>>> +static void icl_get_config(struct intel_crtc_state *crtc_state)
>>>> +{
>>>> + /*
>>>> + * TODO: placeholder for degamma validation
>>>> + * glk_get_degamma_config(crtc_state, 0);
>>>> + */
>>>> +
>>>> + if (crtc_state_is_legacy_gamma(crtc_state))
>>>> + i9xx_get_config(crtc_state);
>>>> + else
>>>> + bdw_get_gamma_config(crtc_state, 0);
>>>> +}
>>>> +
>>>> void intel_color_load_luts(const struct intel_crtc_state *crtc_state)
>>>> {
>>>> struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
>>>> @@ -679,6 +775,13 @@ void intel_color_load_luts(const struct intel_crtc_state *crtc_state)
>>>> dev_priv->display.load_luts(crtc_state);
>>>> }
>>>>
>>>> +void intel_color_get_config(struct intel_crtc_state *crtc_state)
>>>> +{
>>>> + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
>>>> +
>>>> + dev_priv->display.get_config(crtc_state);
>>> This will oops on platforms where you haven't implemented it yet.
>>>
>>>> +}
>>>> +
>>>> void intel_color_commit(const struct intel_crtc_state *crtc_state)
>>>> {
>>>> struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
>>>> @@ -833,22 +936,34 @@ void intel_color_init(struct intel_crtc *crtc)
>>>>
>>>> drm_mode_crtc_set_gamma_size(&crtc->base, 256);
>>>>
>>>> + /*
>>>> + * TODO: In the following if ladder, kept placeholders
>>>> + * for extending lut validation for legacy platforms.
>>>> + */
>>> I think adding the placeholder comments is too messy.
>>>
>>>> if (HAS_GMCH(dev_priv)) {
>>>> - if (IS_CHERRYVIEW(dev_priv))
>>>> + if (IS_CHERRYVIEW(dev_priv)) {
>>>> dev_priv->display.load_luts = cherryview_load_luts;
>>>> - else
>>>> + /* dev_priv->display.get_config = cherryview_get_config; */
>>>> + } else {
>>>> dev_priv->display.load_luts = i9xx_load_luts;
>>>> + dev_priv->display.get_config = i9xx_get_config;
>>>> + }
>>>>
>>>> dev_priv->display.color_commit = i9xx_color_commit;
>>>> } else {
>>>> - if (IS_ICELAKE(dev_priv))
>>>> + if (IS_ICELAKE(dev_priv)) {
>>>> dev_priv->display.load_luts = icl_load_luts;
>>>> - else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
>>>> + dev_priv->display.get_config = icl_get_config;
>>>> + } else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
>>>> dev_priv->display.load_luts = glk_load_luts;
>>>> - else if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
>>>> + /* dev_priv->display.get_config = glk_get_config; */
>>>> + } else if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv)) {
>>>> dev_priv->display.load_luts = broadwell_load_luts;
>>>> - else
>>>> + /* dev_priv->display.get_config = broadwell_get_config; */
>>>> + } else {
>>>> dev_priv->display.load_luts = i9xx_load_luts;
>>>> + dev_priv->display.get_config = i9xx_get_config;
>>>> + }
>>>>
>>>> if (INTEL_GEN(dev_priv) >= 9)
>>>> dev_priv->display.color_commit = skl_color_commit;
>>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>>>> index 963b4bd..165d797 100644
>>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>>> @@ -8212,6 +8212,11 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
>>>>
>>>> i9xx_get_pipe_color_config(pipe_config);
>>>>
>>>> + /*
>>>> + * TODO: Yet to implement for legacy platforms
>>>> + * intel_color_get_config(pipe_config);
>>>> + */
>>>> +
>>> I'm not sure about adding these comments either.
>>>
>>>> if (INTEL_GEN(dev_priv) < 4)
>>>> pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
>>>>
>>>> @@ -9284,6 +9289,11 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
>>>>
>>>> i9xx_get_pipe_color_config(pipe_config);
>>>>
>>>> + /*
>>>> + * TODO: Yet to implement for legacy platforms
>>>> + * intel_color_get_config(pipe_config);
>>>> + */
>>>> +
>>>> if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
>>>> struct intel_shared_dpll *pll;
>>>> enum intel_dpll_id pll_id;
>>>> @@ -9932,6 +9942,8 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
>>>> i9xx_get_pipe_color_config(pipe_config);
>>>> }
>>>>
>>>> + intel_color_get_config(pipe_config);
>>>> +
>>>> power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
>>>> if (intel_display_power_get_if_enabled(dev_priv, power_domain)) {
>>>> WARN_ON(power_domain_mask & BIT_ULL(power_domain));
>>>> @@ -11990,6 +12002,34 @@ static bool fastboot_enabled(struct drm_i915_private *dev_priv)
>>>> return false;
>>>> }
>>>>
>>>> +static bool intel_compare_blob(struct drm_property_blob *blob1,
>>>> + struct drm_property_blob *blob2)
>>>> +{
>>>> + struct drm_color_lut *sw_lut = blob1->data;
>>>> + struct drm_color_lut *hw_lut = blob2->data;
>>>> + int sw_lut_size, hw_lut_size;
>>>> + int i;
>>>> +
>>>> + sw_lut_size = drm_color_lut_size(blob1);
>>>> + hw_lut_size = drm_color_lut_size(blob2);
>>>> +
>>>> + if (sw_lut_size != hw_lut_size) {
>>>> + DRM_DEBUG_KMS("Invalid LUT size; got %d, expected %d\n", hw_lut_size, sw_lut_size);
>>> Please don't add these debug logs here. Instead, add a separate function
>>> to log errors at the higher level. Contrast PIPE_CONF_CHECK_INFOFRAME()
>>> and pipe_config_infoframe_err(). That can come as a follow-up
>>> improvement, but the debug logs here are unnecessary.
>>>
>>>> + return false;
>>>> + }
>>>> +
>>>> + for (i = 0; i < sw_lut_size; i++) {
>>>> + if (hw_lut[i].red != sw_lut[i].red ||
>>>> + hw_lut[i].blue != sw_lut[i].blue ||
>>>> + hw_lut[i].green != sw_lut[i].green) {
>>>> + DRM_DEBUG_KMS("Invalid LUT value; sw_lut value doesn't match hw_lut value\n");
>>>> + return false;
>>>> + }
>>>> + }
>>>> +
>>>> + return true;
>>>> +}
>>>> +
>>> I'd put this in intel_color.c and name it properly. You can't use it to
>>> compare random blobs, and the comparison needs to take platform specific
>>> bit precision of the readout into account.
>>>
>>> The blobs may be NULL.
>>>
>>>> static bool
>>>> intel_pipe_config_compare(struct drm_i915_private *dev_priv,
>>>> struct intel_crtc_state *current_config,
>>>> @@ -12148,6 +12188,14 @@ static bool fastboot_enabled(struct drm_i915_private *dev_priv)
>>>> } \
>>>> } while (0)
>>>>
>>>> +#define PIPE_CONF_CHECK_BLOB(name) do { \
>>> CHECK_LUT or CHECK_COLOR_LUT or something, not just CHECK_BLOB.
>>>
>>>> + if (!intel_compare_blob(current_config->name, pipe_config->name)) { \
>>>> + pipe_config_err(adjust, __stringify(name), \
>>>> + "hw_state doesn't match sw_state\n"); \
>>>> + ret = false; \
>>>> + } \
>>>> +} while (0)
>>>> +
>>>> #define PIPE_CONF_QUIRK(quirk) \
>>>> ((current_config->quirks | pipe_config->quirks) & (quirk))
>>>>
>>>> @@ -12287,6 +12335,8 @@ static bool fastboot_enabled(struct drm_i915_private *dev_priv)
>>>> PIPE_CONF_CHECK_INFOFRAME(spd);
>>>> PIPE_CONF_CHECK_INFOFRAME(hdmi);
>>>>
>>>> + PIPE_CONF_CHECK_BLOB(base.gamma_lut);
>>>> +
>>>> #undef PIPE_CONF_CHECK_X
>>>> #undef PIPE_CONF_CHECK_I
>>>> #undef PIPE_CONF_CHECK_BOOL
>>>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>>>> index 40ebc94..a6acd9b 100644
>>>> --- a/drivers/gpu/drm/i915/intel_drv.h
>>>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>>>> @@ -2512,6 +2512,7 @@ int intel_plane_atomic_check_with_state(const struct intel_crtc_state *old_crtc_
>>>> int intel_color_check(struct intel_crtc_state *crtc_state);
>>>> void intel_color_commit(const struct intel_crtc_state *crtc_state);
>>>> void intel_color_load_luts(const struct intel_crtc_state *crtc_state);
>>>> +void intel_color_get_config(struct intel_crtc_state *crtc_state);
>>>>
>>>> /* intel_lspcon.c */
>>>> bool lspcon_init(struct intel_digital_port *intel_dig_port);
--
~Swati Sharma
More information about the Intel-gfx
mailing list