[Intel-gfx] [PATCH v2 1/4] drm/i915/icl: Assign Master slave crtc links for Transcoder Port Sync

Srivatsa, Anusha anusha.srivatsa at intel.com
Sat May 4 00:09:20 UTC 2019



>-----Original Message-----
>From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
>Manasi Navare
>Sent: Tuesday, April 23, 2019 8:49 AM
>To: intel-gfx at lists.freedesktop.org
>Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
>Subject: [Intel-gfx] [PATCH v2 1/4] drm/i915/icl: Assign Master slave crtc links for
>Transcoder Port Sync
>
>In case of tiled displays when the two tiles are sent across two CRTCs over two
>separate DP SST connectors, we need a mechanism to synchronize the two CRTCs
>and their corresponding transcoders.
>So use the master-slave mode where there is one master corresponding to last
>horizontal and vertical tile that needs to be genlocked with all other slave tiles.
>This patch identifies saves the master CRTC pointer in all the slave CRTC states.
>This pointer is needed to select the master CRTC/transcoder while configuring
>transcoder port sync for the corresponding slaves.
>
>v2:
>* Move this to intel_mode_set_pipe_config(Jani N, Ville)
>* Use slave_bitmask to save associated slaves in master crtc state (Ville)
>
>Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
>Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
>Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
>Cc: Matt Roper <matthew.d.roper at intel.com>
>Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
>---
> drivers/gpu/drm/i915/intel_display.c | 89 ++++++++++++++++++++++++++++
> drivers/gpu/drm/i915/intel_drv.h     |  6 ++
> 2 files changed, 95 insertions(+)
>
>diff --git a/drivers/gpu/drm/i915/intel_display.c
>b/drivers/gpu/drm/i915/intel_display.c
>index b276345779e6..92dea2231499 100644
>--- a/drivers/gpu/drm/i915/intel_display.c
>+++ b/drivers/gpu/drm/i915/intel_display.c
>@@ -11316,6 +11316,86 @@ static int icl_check_nv12_planes(struct
>intel_crtc_state *crtc_state)
> 	return 0;
> }
>
>+static int icl_add_genlock_crtcs(struct drm_crtc *crtc,
>+				 struct intel_crtc_state *crtc_state,
>+				 struct drm_atomic_state *state)
>+{
>+	struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
>+	struct drm_connector *master_connector, *connector;
>+	struct drm_connector_state *connector_state;
>+	struct drm_connector_list_iter conn_iter;
>+	struct drm_crtc *master_crtc = NULL;
>+	struct drm_crtc_state *master_crtc_state;
>+	int i, tile_group_id;
>+
>+	if (INTEL_GEN(dev_priv) < 11)
>+		return 0;
>+
>+	/*
>+	 * In case of tiled displays there could be one or more slaves but there is
>+	 * only one master. Lets make the CRTC used by the connector
>corresponding
>+	 * to the last horizonal and last vertical tile a master/genlock CRTC.
>+	 * All the other CRTCs corresponding to other tiles of the same Tile group
>+	 * are the slave CRTCs and hold a pointer to their genlock CRTC.
>+	 */
>+	for_each_new_connector_in_state(state, connector, connector_state, i)
>{
>+		if (connector_state->crtc != crtc)
>+			continue;
>+		if (!connector->has_tile)
>+			continue;
>+		if (connector->tile_h_loc == connector->num_h_tile - 1 &&
>+		    connector->tile_v_loc == connector->num_v_tile - 1)
>+			continue;
>+		crtc_state->master_crtc = NULL;
>+		tile_group_id = connector->tile_group->id;
>+		drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
>+		drm_for_each_connector_iter(master_connector, &conn_iter) {
>+			struct drm_connector_state *master_conn_state =
>NULL;
>+
>+			if (!master_connector->has_tile)
>+				continue;
>+			if (master_connector->tile_h_loc != master_connector-
>>num_h_tile - 1 ||
>+			    master_connector->tile_v_loc != master_connector-
>>num_v_tile - 1)

Will this ever be true? With the checks above (for slaves) we have iterated over all slaves and potentially left with only master/last tile right?

Anusha 

>+				continue;
>+			if (master_connector->tile_group->id != tile_group_id)
>+				continue;
>+
>+			master_conn_state =
>drm_atomic_get_connector_state(state,
>+
>master_connector);
>+			if (IS_ERR(master_conn_state)) {
>+				drm_connector_list_iter_end(&conn_iter);
>+				return PTR_ERR(master_conn_state);
>+			}
>+			if (master_conn_state->crtc) {
>+				master_crtc = master_conn_state->crtc;
>+				break;
>+			}
>+		}
>+		drm_connector_list_iter_end(&conn_iter);
>+
>+		if (!master_crtc) {
>+			DRM_DEBUG_KMS("Could not add Master CRTC for
>Slave CRTC %d\n",
>+				      connector_state->crtc->base.id);
>+			return -EINVAL;
>+		}
>+
>+		master_crtc_state = drm_atomic_get_crtc_state(state,
>+							      master_crtc);
>+		if (IS_ERR(master_crtc_state))
>+			return PTR_ERR(master_crtc_state);
>+
>+		crtc_state->master_crtc = to_intel_crtc(master_crtc);
>+		to_intel_crtc_state(master_crtc_state)->trans_port_sync_slaves
>|=
>+			BIT(to_intel_crtc(crtc)->pipe);
>+		DRM_DEBUG_KMS("Master CRTC = %d added for Slave CRTC =
>%d\n, slave bitmast = %d",
>+			      master_crtc->base.id,
>+			      crtc_state->base.crtc->base.id,
>+			      to_intel_crtc_state(master_crtc_state)-
>>trans_port_sync_slaves);
>+	}
>+
>+	return 0;
>+}
>+
> static int intel_crtc_atomic_check(struct drm_crtc *crtc,
> 				   struct drm_crtc_state *crtc_state)  { @@ -
>11795,6 +11875,9 @@ clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
> 	if (IS_G4X(dev_priv) ||
> 	    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
> 		saved_state->wm = crtc_state->wm;
>+	if (INTEL_GEN(dev_priv) >= 11)
>+		saved_state->trans_port_sync_slaves =
>+			crtc_state->trans_port_sync_slaves;
>
> 	/* Keep base drm_crtc_state intact, only clear our extended struct */
> 	BUILD_BUG_ON(offsetof(struct intel_crtc_state, base)); @@ -11888,6
>+11971,12 @@ intel_modeset_pipe_config(struct drm_crtc *crtc,
> 	drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
> 			      CRTC_STEREO_DOUBLE);
>
>+	ret = icl_add_genlock_crtcs(crtc, pipe_config, state);
>+	if (ret) {
>+		DRM_DEBUG_KMS("\n8K Debug: Cannot assign genlock crtcs");
>+		return ret;
>+	}
>+
> 	/* Pass our mode to the connectors and the CRTC to give them a chance
>to
> 	 * adjust it according to limitations or connector properties, and also
> 	 * a chance to reject the mode entirely.
>diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>index a38b9cff5cd0..8ae9cb662e28 100644
>--- a/drivers/gpu/drm/i915/intel_drv.h
>+++ b/drivers/gpu/drm/i915/intel_drv.h
>@@ -1082,6 +1082,12 @@ struct intel_crtc_state {
>
> 	/* Forward Error correction State */
> 	bool fec_enable;
>+
>+	/* Pointer to master crtc in case of tiled displays */
>+	struct intel_crtc *master_crtc;
>+
>+	/* Bitmask to indicate slaves attached */
>+	u8 trans_port_sync_slaves;
> };
>
> struct intel_crtc {
>--
>2.19.1
>
>_______________________________________________
>Intel-gfx mailing list
>Intel-gfx at lists.freedesktop.org
>https://lists.freedesktop.org/mailman/listinfo/intel-gfx


More information about the Intel-gfx mailing list