[Intel-gfx] [PATCH v2 2/4] drm/i915/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports

[Manasi Navare]

On Fri, May 03, 2019 at 05:13:47PM -0700, Srivatsa, Anusha wrote:
> 
> 
> >-----Original Message-----
> >From: Intel-gfx [mailto:intel-gfx-bounces at lists.freedesktop.org] On Behalf Of
> >Manasi Navare
> >Sent: Tuesday, April 23, 2019 8:49 AM
> >To: intel-gfx at lists.freedesktop.org
> >Cc: Nikula, Jani <jani.nikula at intel.com>; Vetter, Daniel
> ><daniel.vetter at intel.com>
> >Subject: [Intel-gfx] [PATCH v2 2/4] drm/i915/icl: Enable TRANSCODER PORT SYNC
> >for tiled displays across separate ports
> >
> >In case of tiled displays where different tiles are displayed across different ports,
> >we need to synchronize the transcoders involved.
> >This patch implements the transcoder port sync feature for synchronizing one
> >master transcoder with one or more slave transcoders. This is only enbaled in
> 								   ^^^typo
> 

Thanks for the catch, will fix this in the next revision.
Does the actual port sync bit and master select setting part in the register look good?

Manasi


> Anusha 	
> >slave transcoder and the master transcoder is unaware that it is operating in this
> >mode.
> >This has been tested with tiled display connected to ICL.
> >
> >v2:
> >* Do not use RMW, just write to the register in commit (Jani N)
> >
> >Cc: Daniel Vetter <daniel.vetter at intel.com>
> >Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> >Cc: Matt Roper <matthew.d.roper at intel.com>
> >Cc: Jani Nikula <jani.nikula at intel.com>
> >Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> >---
> > drivers/gpu/drm/i915/intel_display.c | 58 ++++++++++++++++++++++++++++
> > 1 file changed, 58 insertions(+)
> >
> >diff --git a/drivers/gpu/drm/i915/intel_display.c
> >b/drivers/gpu/drm/i915/intel_display.c
> >index 92dea2231499..81e8cb9fe221 100644
> >--- a/drivers/gpu/drm/i915/intel_display.c
> >+++ b/drivers/gpu/drm/i915/intel_display.c
> >@@ -4020,6 +4020,61 @@ static void icl_set_pipe_chicken(struct intel_crtc
> >*crtc)
> > 	I915_WRITE(PIPE_CHICKEN(pipe), tmp);
> > }
> >
> >+static void icl_set_transcoder_port_sync(struct intel_atomic_state
> >*old_intel_state,
> >+					 const struct intel_crtc_state
> >*crtc_state) {
> >+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> >+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >+	struct intel_crtc_state *master_crtc_state = NULL;
> >+	enum transcoder master_transcoder;
> >+	u32 trans_ddi_func_ctl2_val;
> >+	u8 master_select;
> >+
> >+	/*
> >+	 * Port Sync Mode cannot be enabled for DP MST
> >+	 */
> >+	if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST))
> >+		return;
> >+
> >+	/*
> >+	 * Configure the master select and enable Transcoder Port Sync for
> >+	 * Slave CRTCs transcoder.
> >+	 */
> >+	if (!crtc_state->master_crtc)
> >+		return;
> >+
> >+	master_crtc_state = intel_atomic_get_new_crtc_state(old_intel_state,
> >+							    crtc_state-
> >>master_crtc);
> >+	if (WARN_ON(!master_crtc_state))
> >+		return;
> >+
> >+	master_transcoder = master_crtc_state->cpu_transcoder;
> >+	switch (master_transcoder) {
> >+	case TRANSCODER_A:
> >+		master_select = 1;
> >+		break;
> >+	case TRANSCODER_B:
> >+		master_select = 2;
> >+		break;
> >+	case TRANSCODER_C:
> >+		master_select = 3;
> >+		break;
> >+	case TRANSCODER_EDP:
> >+	default:
> >+		master_select = 0;
> >+		break;
> >+	}
> >+	/* Set the master select bits for Tranascoder Port Sync */
> >+	trans_ddi_func_ctl2_val =
> >(PORT_SYNC_MODE_MASTER_SELECT(master_select) &
> >+				   PORT_SYNC_MODE_MASTER_SELECT_MASK)
> ><<
> >+		PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
> >+	/* Enable Transcoder Port Sync */
> >+	trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE;
> >+
> >+	I915_WRITE(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder),
> >+		   trans_ddi_func_ctl2_val);
> >+}
> >+
> > static void intel_update_pipe_config(const struct intel_crtc_state
> >*old_crtc_state,
> > 				     const struct intel_crtc_state
> >*new_crtc_state)  { @@ -5971,6 +6026,9 @@ static void
> >haswell_crtc_enable(struct intel_crtc_state *pipe_config,
> > 	if (!transcoder_is_dsi(cpu_transcoder))
> > 		intel_set_pipe_timings(pipe_config);
> >
> >+	if (INTEL_GEN(dev_priv) >= 11)
> >+		icl_set_transcoder_port_sync(old_intel_state, pipe_config);
> >+
> > 	intel_set_pipe_src_size(pipe_config);
> >
> > 	if (cpu_transcoder != TRANSCODER_EDP &&
> >--
> >2.19.1
> >
> >_______________________________________________
> >Intel-gfx mailing list
> >Intel-gfx at lists.freedesktop.org
> >https://lists.freedesktop.org/mailman/listinfo/intel-gfx