[Intel-gfx] [PATCH] drm/i915/dsi: Use a fuzzy check for burst mode clock check
kbuild test robot
lkp at intel.com
Fri May 24 22:15:14 UTC 2019
Hi Hans,
I love your patch! Yet something to improve:
[auto build test ERROR on drm-intel/for-linux-next]
[also build test ERROR on v5.2-rc1 next-20190524]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Hans-de-Goede/drm-i915-dsi-Use-a-fuzzy-check-for-burst-mode-clock-check/20190525-045136
base: git://anongit.freedesktop.org/drm-intel for-linux-next
config: x86_64-allyesconfig (attached as .config)
compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64
If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp at intel.com>
All errors (new ones prefixed by >>):
vim +867 drivers/gpu/drm/i915/intel_dsi_vbt.c
803
804 bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
805 {
806 struct drm_device *dev = intel_dsi->base.base.dev;
807 struct drm_i915_private *dev_priv = to_i915(dev);
808 struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
809 struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
810 struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
811 u16 burst_mode_ratio;
812 enum port port;
813
814 DRM_DEBUG_KMS("\n");
815
816 intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
817 intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
818 intel_dsi->lane_count = mipi_config->lane_cnt + 1;
819 intel_dsi->pixel_format =
820 pixel_format_from_register_bits(
821 mipi_config->videomode_color_format << 7);
822
823 intel_dsi->dual_link = mipi_config->dual_link;
824 intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
825 intel_dsi->operation_mode = mipi_config->is_cmd_mode;
826 intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
827 intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
828 intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
829 intel_dsi->hs_tx_timeout = mipi_config->hs_tx_timeout;
830 intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
831 intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
832 intel_dsi->init_count = mipi_config->master_init_timer;
833 intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
834 intel_dsi->video_frmt_cfg_bits =
835 mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
836 intel_dsi->bgr_enabled = mipi_config->rgb_flip;
837
838 /* Starting point, adjusted depending on dual link and burst mode */
839 intel_dsi->pclk = mode->clock;
840
841 /* In dual link mode each port needs half of pixel clock */
842 if (intel_dsi->dual_link) {
843 intel_dsi->pclk /= 2;
844
845 /* we can enable pixel_overlap if needed by panel. In this
846 * case we need to increase the pixelclock for extra pixels
847 */
848 if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
849 intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
850 }
851 }
852
853 /* Burst Mode Ratio
854 * Target ddr frequency from VBT / non burst ddr freq
855 * multiply by 100 to preserve remainder
856 */
857 if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
858 if (mipi_config->target_burst_mode_freq) {
859 u32 bitrate = intel_dsi_bitrate(intel_dsi);
860
861 /*
862 * Sometimes the VBT contains a slightly lower clock,
863 * then the bitrate we have calculated, in this case
864 * just replace it with the calculated bitrate.
865 */
866 if (mipi_config->target_burst_mode_freq < bitrate &&
> 867 intel_fuzzy_clock_check(
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
-------------- next part --------------
A non-text attachment was scrubbed...
Name: .config.gz
Type: application/gzip
Size: 66458 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20190525/fd7b182d/attachment-0001.gz>
More information about the Intel-gfx
mailing list