[Intel-gfx] [PATCH v2 3/5] drm/dsi: add missing DSI DCS commands

[Jani Nikula]

On Tue, 05 Nov 2019, Thierry Reding <thierry.reding at gmail.com> wrote:
> On Mon, Oct 28, 2019 at 05:00:45PM +0200, Jani Nikula wrote:
>> Update from the DCS specification.
>> 
>> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>>  include/video/mipi_display.h | 10 ++++++++++
>>  1 file changed, 10 insertions(+)
>> 
>> diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
>> index 6b6390dfa203..928f8c4b6658 100644
>> --- a/include/video/mipi_display.h
>> +++ b/include/video/mipi_display.h
>> @@ -79,7 +79,9 @@ enum {
>>  enum {
>>  	MIPI_DCS_NOP			= 0x00,
>>  	MIPI_DCS_SOFT_RESET		= 0x01,
>> +	MIPI_DCS_GET_COMPRESSION_MODE	= 0x03,
>>  	MIPI_DCS_GET_DISPLAY_ID		= 0x04,
>> +	MIPI_DCS_GET_ERROR_COUNT_ON_DSI	= 0x05,
>>  	MIPI_DCS_GET_RED_CHANNEL	= 0x06,
>>  	MIPI_DCS_GET_GREEN_CHANNEL	= 0x07,
>>  	MIPI_DCS_GET_BLUE_CHANNEL	= 0x08,
>> @@ -94,6 +96,8 @@ enum {
>>  	MIPI_DCS_EXIT_SLEEP_MODE	= 0x11,
>>  	MIPI_DCS_ENTER_PARTIAL_MODE	= 0x12,
>>  	MIPI_DCS_ENTER_NORMAL_MODE	= 0x13,
>> +	MIPI_DCS_GET_IMAGE_CHECKSUM_RGB	= 0x14,
>> +	MIPI_DCS_GET_IMAGE_CHECKSUM_CT	= 0x15,
>>  	MIPI_DCS_EXIT_INVERT_MODE	= 0x20,
>>  	MIPI_DCS_ENTER_INVERT_MODE	= 0x21,
>>  	MIPI_DCS_SET_GAMMA_CURVE	= 0x26,
>> @@ -105,6 +109,7 @@ enum {
>>  	MIPI_DCS_WRITE_LUT		= 0x2D,
>>  	MIPI_DCS_READ_MEMORY_START	= 0x2E,
>>  	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
>> +	MIPI_DCS_SET_PARTIAL_COLUMNS	= 0x31,
>>  	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
>>  	MIPI_DCS_SET_TEAR_OFF		= 0x34,
>>  	MIPI_DCS_SET_TEAR_ON		= 0x35,
>> @@ -114,7 +119,10 @@ enum {
>>  	MIPI_DCS_ENTER_IDLE_MODE	= 0x39,
>>  	MIPI_DCS_SET_PIXEL_FORMAT	= 0x3A,
>>  	MIPI_DCS_WRITE_MEMORY_CONTINUE	= 0x3C,
>> +	MIPI_DCS_SET_3D_CONTROL		= 0x3D,
>>  	MIPI_DCS_READ_MEMORY_CONTINUE	= 0x3E,
>> +	MIPI_DCS_GET_3D_CONTROL		= 0x3F,
>> +	MIPI_DCS_SET_VSYNC_TIMING	= 0x40,
>>  	MIPI_DCS_SET_TEAR_SCANLINE	= 0x44,
>>  	MIPI_DCS_GET_SCANLINE		= 0x45,
>>  	MIPI_DCS_SET_DISPLAY_BRIGHTNESS = 0x51,		/* MIPI DCS 1.3 */
>> @@ -126,7 +134,9 @@ enum {
>>  	MIPI_DCS_SET_CABC_MIN_BRIGHTNESS = 0x5E,	/* MIPI DCS 1.3 */
>>  	MIPI_DCS_GET_CABC_MIN_BRIGHTNESS = 0x5F,	/* MIPI DCS 1.3 */
>>  	MIPI_DCS_READ_DDB_START		= 0xA1,
>> +	MIPI_DCS_READ_PPS_START		= 0xA2,
>>  	MIPI_DCS_READ_DDB_CONTINUE	= 0xA8,
>> +	MIPI_DCS_READ_PPS_CONTINUE	= 0xA9,
>>  };
>>  
>>  /* MIPI DCS pixel formats */
>
> Okay, found a copy of DCS v1.4 and the above matches the specification,
> so:
>
> Reviewed-by: Thierry Reding <treding at nvidia.com>
>
> Does it perhaps make sense to add comments about the version number that
> these were introduced with?

The trouble is, I don't have the complete chronology of the
specifications, so I can't be sure at which point each one was added.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Graphics Center