[Intel-gfx] [PATCH] drm/i915: switch intel_ddi_init() to intel types
Lucas De Marchi
lucas.demarchi at intel.com
Thu Nov 7 00:22:50 UTC 2019
On Wed, Nov 06, 2019 at 03:31:04PM +0200, Ville Syrjälä wrote:
>On Tue, Nov 05, 2019 at 11:17:17PM -0800, Lucas De Marchi wrote:
>> Prefer using intel_encoder and pass the base where needed rather than
>> keeping both encoder and intel_encoder variables around.
>>
>> v2: actually add all changes to the patch
>>
>> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
>
>lgtm
>Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
pushed, thanks
Lucas De Marchi
>
>> ---
>> drivers/gpu/drm/i915/display/intel_ddi.c | 56 ++++++++++++------------
>> 1 file changed, 28 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
>> index c91521bcf06a..398c6f054a6e 100644
>> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
>> @@ -4687,8 +4687,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>> struct ddi_vbt_port_info *port_info =
>> &dev_priv->vbt.ddi_port_info[port];
>> struct intel_digital_port *intel_dig_port;
>> - struct intel_encoder *intel_encoder;
>> - struct drm_encoder *encoder;
>> + struct intel_encoder *encoder;
>> bool init_hdmi, init_dp, init_lspcon = false;
>> enum phy phy = intel_port_to_phy(dev_priv, port);
>>
>> @@ -4717,31 +4716,31 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>> if (!intel_dig_port)
>> return;
>>
>> - intel_encoder = &intel_dig_port->base;
>> - encoder = &intel_encoder->base;
>> + encoder = &intel_dig_port->base;
>>
>> - drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
>> + drm_encoder_init(&dev_priv->drm, &encoder->base, &intel_ddi_funcs,
>> DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
>>
>> - intel_encoder->hotplug = intel_ddi_hotplug;
>> - intel_encoder->compute_output_type = intel_ddi_compute_output_type;
>> - intel_encoder->compute_config = intel_ddi_compute_config;
>> - intel_encoder->enable = intel_enable_ddi;
>> - intel_encoder->pre_pll_enable = intel_ddi_pre_pll_enable;
>> - intel_encoder->post_pll_disable = intel_ddi_post_pll_disable;
>> - intel_encoder->pre_enable = intel_ddi_pre_enable;
>> - intel_encoder->disable = intel_disable_ddi;
>> - intel_encoder->post_disable = intel_ddi_post_disable;
>> - intel_encoder->update_pipe = intel_ddi_update_pipe;
>> - intel_encoder->get_hw_state = intel_ddi_get_hw_state;
>> - intel_encoder->get_config = intel_ddi_get_config;
>> - intel_encoder->suspend = intel_dp_encoder_suspend;
>> - intel_encoder->get_power_domains = intel_ddi_get_power_domains;
>> - intel_encoder->type = INTEL_OUTPUT_DDI;
>> - intel_encoder->power_domain = intel_port_to_power_domain(port);
>> - intel_encoder->port = port;
>> - intel_encoder->cloneable = 0;
>> - intel_encoder->pipe_mask = ~0;
>> + encoder->hotplug = intel_ddi_hotplug;
>> + encoder->compute_output_type = intel_ddi_compute_output_type;
>> + encoder->compute_config = intel_ddi_compute_config;
>> + encoder->enable = intel_enable_ddi;
>> + encoder->pre_pll_enable = intel_ddi_pre_pll_enable;
>> + encoder->post_pll_disable = intel_ddi_post_pll_disable;
>> + encoder->pre_enable = intel_ddi_pre_enable;
>> + encoder->disable = intel_disable_ddi;
>> + encoder->post_disable = intel_ddi_post_disable;
>> + encoder->update_pipe = intel_ddi_update_pipe;
>> + encoder->get_hw_state = intel_ddi_get_hw_state;
>> + encoder->get_config = intel_ddi_get_config;
>> + encoder->suspend = intel_dp_encoder_suspend;
>> + encoder->get_power_domains = intel_ddi_get_power_domains;
>> +
>> + encoder->type = INTEL_OUTPUT_DDI;
>> + encoder->power_domain = intel_port_to_power_domain(port);
>> + encoder->port = port;
>> + encoder->cloneable = 0;
>> + encoder->pipe_mask = ~0;
>>
>> if (INTEL_GEN(dev_priv) >= 11)
>> intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
>> @@ -4749,6 +4748,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>> else
>> intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
>> (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
>> +
>> intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
>> intel_dig_port->max_lanes = intel_ddi_max_lanes(intel_dig_port);
>> intel_dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port);
>> @@ -4759,8 +4759,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>>
>> intel_tc_port_init(intel_dig_port, is_legacy);
>>
>> - intel_encoder->update_prepare = intel_ddi_update_prepare;
>> - intel_encoder->update_complete = intel_ddi_update_complete;
>> + encoder->update_prepare = intel_ddi_update_prepare;
>> + encoder->update_complete = intel_ddi_update_complete;
>> }
>>
>> WARN_ON(port > PORT_I);
>> @@ -4776,7 +4776,7 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>>
>> /* In theory we don't need the encoder->type check, but leave it just in
>> * case we have some really bad VBTs... */
>> - if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) {
>> + if (encoder->type != INTEL_OUTPUT_EDP && init_hdmi) {
>> if (!intel_ddi_init_hdmi_connector(intel_dig_port))
>> goto err;
>> }
>> @@ -4800,6 +4800,6 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>> return;
>>
>> err:
>> - drm_encoder_cleanup(encoder);
>> + drm_encoder_cleanup(&encoder->base);
>> kfree(intel_dig_port);
>> }
>> --
>> 2.23.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>--
>Ville Syrjälä
>Intel
More information about the Intel-gfx
mailing list