[Intel-gfx] [PATCH v2 10/10] drm/i915/dsi: add support for DSC
Kulkarni, Vandita
vandita.kulkarni at intel.com
Wed Nov 20 08:39:17 UTC 2019
> -----Original Message-----
> From: Jani Nikula <jani.nikula at intel.com>
> Sent: Friday, November 15, 2019 9:04 PM
> To: intel-gfx at lists.freedesktop.org
> Cc: Nikula, Jani <jani.nikula at intel.com>; Kulkarni, Vandita
> <vandita.kulkarni at intel.com>; ville.syrjala at linux.intel.com
> Subject: [PATCH v2 10/10] drm/i915/dsi: add support for DSC
>
> Enable DSC for DSI, if specified in VBT.
>
> This is now excessively dynamic, being enabled at compute config. I don't
> expect us to need to switch between DSC and non-DSC for the same panel.
> Cargo culting the DP DSC shows.
>
> Mode valid lacks a sensible implementation, as does get config.
>
> v3: take compressed bpp into account
>
> v2: Nuke conn_state->max_requested_bpc, it's not used on DSI
>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>
> ---
>
> The burst mode stuff wrt DSC are still whatever, but at least we should be
> taking DSC better into account in port clock calculations.
> ---
> drivers/gpu/drm/i915/display/icl_dsi.c | 113 ++++++++++++++++++++-----
> 1 file changed, 94 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> b/drivers/gpu/drm/i915/display/icl_dsi.c
> index d576f29cef75..dc87134f5c27 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -34,6 +34,7 @@
> #include "intel_ddi.h"
> #include "intel_dsi.h"
> #include "intel_panel.h"
> +#include "intel_vdsc.h"
>
> static inline int header_credits_available(struct drm_i915_private *dev_priv,
> enum transcoder dsi_trans)
> @@ -302,17 +303,22 @@ static void configure_dual_link_mode(struct
> intel_encoder *encoder, }
>
> /* aka DSI 8X clock */
> -static int afe_clk(struct intel_encoder *encoder)
> +static int afe_clk(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> {
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> int bpp;
>
> - bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi->pixel_format);
> + if (crtc_state->dsc.compression_enable)
> + bpp = crtc_state->dsc.compressed_bpp;
> + else
> + bpp = mipi_dsi_pixel_format_to_bpp(intel_dsi-
> >pixel_format);
>
> return DIV_ROUND_CLOSEST(intel_dsi->pclk * bpp, intel_dsi-
> >lane_count); }
>
> -static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder)
> +static void gen11_dsi_program_esc_clk_div(struct intel_encoder *encoder,
> + const struct intel_crtc_state
> *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ -
> 320,7 +326,7 @@ static void gen11_dsi_program_esc_clk_div(struct
> intel_encoder *encoder)
> int afe_clk_khz;
> u32 esc_clk_div_m;
>
> - afe_clk_khz = afe_clk(encoder);
> + afe_clk_khz = afe_clk(encoder, crtc_state);
> esc_clk_div_m = DIV_ROUND_UP(afe_clk_khz, DSI_MAX_ESC_CLK);
>
> for_each_dsi_port(port, intel_dsi->ports) { @@ -498,7 +504,9 @@
> static void gen11_dsi_enable_ddi_buffer(struct intel_encoder *encoder)
> }
> }
>
> -static void gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder)
> +static void
> +gen11_dsi_setup_dphy_timings(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ -
> 539,7 +547,7 @@ static void gen11_dsi_setup_dphy_timings(struct
> intel_encoder *encoder)
> * leave all fields at HW default values.
> */
> if (IS_GEN(dev_priv, 11)) {
> - if (afe_clk(encoder) <= 800000) {
> + if (afe_clk(encoder, crtc_state) <= 800000) {
> for_each_dsi_port(port, intel_dsi->ports) {
> tmp =
> I915_READ(DPHY_TA_TIMING_PARAM(port));
> tmp &= ~TA_SURE_MASK;
> @@ -649,7 +657,7 @@ gen11_dsi_configure_transcoder(struct intel_encoder
> *encoder,
> tmp |= EOTP_DISABLED;
>
> /* enable link calibration if freq > 1.5Gbps */
> - if (afe_clk(encoder) >= 1500 * 1000) {
> + if (afe_clk(encoder, pipe_config) >= 1500 * 1000) {
> tmp &= ~LINK_CALIBRATION_MASK;
> tmp |= CALIBRATION_ENABLED_INITIAL_ONLY;
> }
> @@ -915,7 +923,8 @@ static void gen11_dsi_enable_transcoder(struct
> intel_encoder *encoder)
> }
> }
>
> -static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder)
> +static void gen11_dsi_setup_timeouts(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); @@ -
> 930,7 +939,7 @@ static void gen11_dsi_setup_timeouts(struct intel_encoder
> *encoder)
> * TIME_NS = (BYTE_CLK_COUNT * 8 * 10^6)/ Bitrate
> * ESCAPE_CLK_COUNT = TIME_NS/ESC_CLK_NS
> */
> - divisor = intel_dsi_tlpx_ns(intel_dsi) * afe_clk(encoder) * 1000;
> + divisor = intel_dsi_tlpx_ns(intel_dsi) * afe_clk(encoder, crtc_state)
> +* 1000;
> mul = 8 * 1000000;
> hs_tx_timeout = DIV_ROUND_UP(intel_dsi->hs_tx_timeout * mul,
> divisor);
> @@ -966,7 +975,7 @@ static void gen11_dsi_setup_timeouts(struct
> intel_encoder *encoder)
>
> static void
> gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
> - const struct intel_crtc_state *pipe_config)
> + const struct intel_crtc_state *crtc_state)
> {
> struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
>
> @@ -983,13 +992,13 @@ gen11_dsi_enable_port_and_phy(struct
> intel_encoder *encoder,
> gen11_dsi_enable_ddi_buffer(encoder);
>
> /* setup D-PHY timings */
> - gen11_dsi_setup_dphy_timings(encoder);
> + gen11_dsi_setup_dphy_timings(encoder, crtc_state);
>
> /* step 4h: setup DSI protocol timeouts */
> - gen11_dsi_setup_timeouts(encoder);
> + gen11_dsi_setup_timeouts(encoder, crtc_state);
>
> /* Step (4h, 4i, 4j, 4k): Configure transcoder */
> - gen11_dsi_configure_transcoder(encoder, pipe_config);
> + gen11_dsi_configure_transcoder(encoder, crtc_state);
>
> /* Step 4l: Gate DDI clocks */
> if (IS_GEN(dev_priv, 11))
> @@ -1036,14 +1045,14 @@ static void gen11_dsi_powerup_panel(struct
> intel_encoder *encoder) }
>
> static void gen11_dsi_pre_pll_enable(struct intel_encoder *encoder,
> - const struct intel_crtc_state *pipe_config,
> + const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state
> *conn_state) {
> /* step2: enable IO power */
> gen11_dsi_enable_io_power(encoder);
>
> /* step3: enable DSI PLL */
> - gen11_dsi_program_esc_clk_div(encoder);
> + gen11_dsi_program_esc_clk_div(encoder, crtc_state);
> }
>
> static void gen11_dsi_pre_enable(struct intel_encoder *encoder, @@ -
> 1061,6 +1070,9 @@ static void gen11_dsi_pre_enable(struct intel_encoder
> *encoder,
> /* step5: program and powerup panel */
> gen11_dsi_powerup_panel(encoder);
>
> + /* FIXME: location? */
> + intel_dsc_enable(encoder, pipe_config);
> +
> /* step6c: configure transcoder timings */
> gen11_dsi_set_transcoder_timings(encoder, pipe_config);
>
> @@ -1222,6 +1234,13 @@ static void gen11_dsi_disable(struct
> intel_encoder *encoder,
> gen11_dsi_disable_io_power(encoder);
> }
>
> +static enum drm_mode_status gen11_dsi_mode_valid(struct
> drm_connector *connector,
> + struct drm_display_mode
> *mode)
> +{
> + /* FIXME: DSC? */
> + return intel_dsi_mode_valid(connector, mode); }
> +
> static void gen11_dsi_get_timings(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config) { @@ -
> 1269,6 +1288,53 @@ static void gen11_dsi_get_config(struct intel_encoder
> *encoder,
> pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc); }
>
> +static int gen11_dsi_dsc_compute_config(struct intel_encoder *encoder,
> + struct intel_crtc_state *pipe_config) {
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct drm_dsc_config *vdsc_cfg = &pipe_config->dsc.config;
> + struct drm_display_mode *adjusted_mode = &pipe_config-
> >hw.adjusted_mode;
> + int dsc_max_bpc = INTEL_GEN(dev_priv) >= 12 ? 12 : 10;
> + bool use_dsc;
> + int ret;
> +
> + use_dsc = intel_bios_get_dsc_params(encoder, pipe_config,
> dsc_max_bpc);
> + if (!use_dsc)
> + return 0;
> +
> + if (pipe_config->pipe_bpp < 8 * 3)
> + return -EINVAL;
> +
> + if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq) {
> + if (pipe_config->dsc.slice_count > 1) {
> + pipe_config->dsc.dsc_split = true;
> + } else {
> + DRM_DEBUG_KMS("Cannot split stream to use 2
> VDSC instances\n");
> + return -EINVAL;
> + }
> + }
> +
> + vdsc_cfg->convert_rgb = false;
> +
> + ret = intel_dsc_compute_params(encoder, pipe_config);
> + if (ret)
> + return ret;
> +
> + /* DSI specific sanity checks on the common code */
> + WARN_ON(vdsc_cfg->vbr_enable);
> + WARN_ON(vdsc_cfg->pic_width % vdsc_cfg->slice_width);
> + WARN_ON(vdsc_cfg->slice_height < 8);
> + WARN_ON(vdsc_cfg->pic_height % vdsc_cfg->slice_height);
> +
> + ret = drm_dsc_compute_rc_parameters(vdsc_cfg);
> + if (ret)
> + return ret;
> +
> + pipe_config->dsc.compression_enable = true;
> +
> + return 0;
> +}
> +
> static int gen11_dsi_compute_config(struct intel_encoder *encoder,
> struct intel_crtc_state *pipe_config,
> struct drm_connector_state *conn_state)
> @@ -1300,7 +1366,11 @@ static int gen11_dsi_compute_config(struct
> intel_encoder *encoder,
> pipe_config->pipe_bpp = 18;
TRANS_DSI_FUNC_CONF register needs to be updated with pixel format as compressed(0x6)
Should we be having pipe_config->output_format = compressed ?
Thanks,
Vandita
>
> pipe_config->clock_set = true;
> - pipe_config->port_clock = afe_clk(encoder) / 5;
> +
> + if (gen11_dsi_dsc_compute_config(encoder, pipe_config))
> + DRM_DEBUG_KMS("Attempting to use DSC failed\n");
> +
> + pipe_config->port_clock = afe_clk(encoder, pipe_config) / 5;
>
> return 0;
> }
> @@ -1308,8 +1378,13 @@ static int gen11_dsi_compute_config(struct
> intel_encoder *encoder, static void gen11_dsi_get_power_domains(struct
> intel_encoder *encoder,
> struct intel_crtc_state *crtc_state) {
> - get_dsi_io_power_domains(to_i915(encoder->base.dev),
> - enc_to_intel_dsi(&encoder->base));
> + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> +
> + get_dsi_io_power_domains(i915, enc_to_intel_dsi(&encoder-
> >base));
> +
> + if (crtc_state->dsc.compression_enable)
> + intel_display_power_get(i915,
> +
> intel_dsc_power_domain(crtc_state));
> }
>
> static bool gen11_dsi_get_hw_state(struct intel_encoder *encoder, @@ -
> 1379,7 +1454,7 @@ static const struct drm_connector_funcs
> gen11_dsi_connector_funcs = {
>
> static const struct drm_connector_helper_funcs
> gen11_dsi_connector_helper_funcs = {
> .get_modes = intel_dsi_get_modes,
> - .mode_valid = intel_dsi_mode_valid,
> + .mode_valid = gen11_dsi_mode_valid,
> .atomic_check = intel_digital_connector_atomic_check,
> };
>
> --
> 2.20.1
More information about the Intel-gfx
mailing list