[Intel-gfx] [PATCH] drm/i915: Extend reset modparam to domain resets

Stuart Summers stuart.summers at intel.com
Wed Nov 20 17:36:42 UTC 2019


In the event a platform does not properly implement reset,
do not go through reset flows for engine domains to avoid
an unlikely situation where writes are accepted but register
values are never cleared, as this can result in GPU wedges
in these cases.

Signed-off-by: Stuart Summers <stuart.summers at intel.com>
---
 drivers/gpu/drm/i915/gt/intel_reset.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c
index 0388f9375366..0454e01e063c 100644
--- a/drivers/gpu/drm/i915/gt/intel_reset.c
+++ b/drivers/gpu/drm/i915/gt/intel_reset.c
@@ -270,6 +270,12 @@ static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
 	struct intel_uncore *uncore = gt->uncore;
 	int err;
 
+	if (!i915_modparams.reset) {
+		DRM_DEBUG_DRIVER("Skipping 0x%08x engines reset\n",
+				 hw_domain_mask);
+		return 0;
+	}
+
 	/*
 	 * GEN6_GDRST is not in the gt power well, no need to check
 	 * for fifo space for the write or forcewake the chip for
@@ -494,6 +500,13 @@ static int gen8_engine_reset_prepare(struct intel_engine_cs *engine)
 		return 0;
 	}
 
+	if (!i915_modparams.reset) {
+		DRM_DEBUG_DRIVER("Skipping %s reset request {request: %08x, RESET_CTL: %08x}\n",
+				 engine->name, request,
+				 intel_uncore_read_fw(uncore, reg));
+		return 0;
+	}
+
 	intel_uncore_write_fw(uncore, reg, _MASKED_BIT_ENABLE(request));
 	ret = __intel_wait_for_register_fw(uncore, reg, mask, ack,
 					   700, 0, NULL);
-- 
2.22.0



More information about the Intel-gfx mailing list