[Intel-gfx] [PATCH v7 7/7] drm/i915/tgl: Add Clear Color support for TGL Render Decompression
Sripada, Radhakrishna
radhakrishna.sripada at intel.com
Tue Nov 26 21:52:39 UTC 2019
Hi Matt,
> -----Original Message-----
> From: Roper, Matthew D
> Sent: Tuesday, November 26, 2019 12:49 PM
> To: Sripada, Radhakrishna <radhakrishna.sripada at intel.com>
> Cc: intel-gfx at lists.freedesktop.org; Pandiyan, Dhinakaran
> <dhinakaran.pandiyan at intel.com>; Syrjala, Ville <ville.syrjala at intel.com>;
> Sharma, Shashank <shashank.sharma at intel.com>; Antognolli, Rafael
> <rafael.antognolli at intel.com>; Chery, Nanley G <nanley.g.chery at intel.com>
> Subject: Re: [PATCH v7 7/7] drm/i915/tgl: Add Clear Color support for TGL
> Render Decompression
>
> On Mon, Nov 25, 2019 at 04:26:35PM -0800, Radhakrishna Sripada wrote:
> > Render Decompression is supported with Y-Tiled main surface. The CCS
> > is linear and has 4 bits of data for each main surface cache line
> > pair, a ratio of 1:256. Additional Clear Color information is passed
> > from the user-space through an offset in the GEM BO. Add a new
> > modifier to identify and parse new Clear Color information and extend
> > Gen12 render decompression functionality to the newly added modifier.
> >
> > v2: Fix has_alpha flag for modifiers, omit CC modifier during initial
> > plane config(Matt). Fix Lookup error.
> > v3: Fix the panic while running kms_cube
> > v4: Add alignment check and reuse the comments for
> > ge12_ccs_formats(Matt)
> > v5: Fix typos and wrap comments(Matt)
> > v6: Rebase
> > v7: Rebase, Add missing case in intel_tile_height(RK)
> >
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > Cc: Ville Syrjala <ville.syrjala at intel.com>
> > Cc: Shashank Sharma <shashank.sharma at intel.com>
> > Cc: Rafael Antognolli <rafael.antognolli at intel.com>
> > Cc: Nanley G Chery <nanley.g.chery at intel.com>
> > Cc: Matt Roper <matthew.d.roper at intel.com>
> > Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
>
> A few minor comments below, but none of them are critical.
>
> Reviewed-by: Matt Roper <matthew.d.roper at intel.com>
>
> What's the current status of the underlying compression series this work is based
> on?
I did not see any patches from DK further on compression patches. From my understanding
The render compression patches got r-b's and the media compression patches need further rework.
>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 64 ++++++++++++++++++-
> > .../drm/i915/display/intel_display_types.h | 3 +
> > drivers/gpu/drm/i915/display/intel_sprite.c | 10 ++-
> > drivers/gpu/drm/i915/i915_reg.h | 12 ++++
> > 4 files changed, 86 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 6c4274c1564d..69e70be86f57 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -1975,6 +1975,10 @@ intel_tile_width_bytes(const struct
> drm_framebuffer *fb, int color_plane)
> > if (color_plane == 1)
> > return 64;
> > /* fall through */
>
> Since this one (GEN12_RC_CCS) now falls through to the new
> GEN12_RC_CCS_CC, you can probably drop these lines since they'll be handled
> the same way in the next case down.
Color_plane == 2 does not apply for GE12_RC_CCS. Do you think it is still ok to club
The two cases?
>
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > + if (color_plane == 1 || color_plane == 2)
>
> I've reviewed a lot of versions of these compression series so I might be getting
> confused, but didn't DK have a version at one time that added some kind of
> is_ccs_plane(mod, plane) helper function? I'm not sure what happened to that,
> but it did seem like a nice way to consolidate the "these planes contain CCS
> stuff" logic rather than having to hardcode the plane ID's all over the place like
> this.
The is_ccs_plane helper function was introduced in media compression patches
Where further complexities were required while calculating plane dims.
>
>
> > + return 64;
> > + /* fall through */
> > case I915_FORMAT_MOD_Y_TILED:
> > if (IS_GEN(dev_priv, 2) || HAS_128_BYTE_Y_TILING(dev_priv))
> > return 128;
> > @@ -2013,6 +2017,10 @@ intel_tile_height(const struct drm_framebuffer
> *fb, int color_plane)
> > if (color_plane == 1)
> > return 1;
> > /* fall through */
>
> As above, you can now consolidate this with the new block below if you want.
>
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > + if (color_plane == 1 || color_plane == 2)
> > + return 1;
> > + /* fall through */
> > default:
> > return intel_tile_size(to_i915(fb->dev)) /
> > intel_tile_width_bytes(fb, color_plane); @@ -2116,6
> +2124,7 @@
> > static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
> > return 256 * 1024;
> > return 0;
> > case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > return 16 * 1024;
> > case I915_FORMAT_MOD_Y_TILED_CCS:
> > case I915_FORMAT_MOD_Yf_TILED_CCS:
> > @@ -2313,8 +2322,16 @@ static u32 intel_adjust_tile_offset(int *x, int
> > *y,
> >
> > static bool is_surface_linear(u64 modifier, int color_plane) {
> > - return modifier == DRM_FORMAT_MOD_LINEAR ||
> > - (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS &&
> color_plane == 1);
> > + switch (modifier) {
> > + case DRM_FORMAT_MOD_LINEAR:
> > + return true;
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> > + return color_plane == 1;
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > + return color_plane == 1 || color_plane == 2;
> > + default:
> > + return false;
> > + }
> > }
> >
> > static u32 intel_adjust_aligned_offset(int *x, int *y, @@ -2502,6
> > +2519,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
> > case I915_FORMAT_MOD_Y_TILED:
> > case I915_FORMAT_MOD_Y_TILED_CCS:
> > case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > return I915_TILING_Y;
> > default:
> > return I915_TILING_NONE;
> > @@ -2551,6 +2569,21 @@ static const struct drm_format_info
> gen12_ccs_formats[] = {
> > .cpp = { 4, 1, }, .hsub = 2, .vsub = 32, .has_alpha = true }, };
> >
> > +/*
> > + * Same as gen12_ccs_formats[] above, but with additional surface
> > +used
> > + * to pass Clear Color information in plane 2 with 64 bits of data.
> > + */
> > +static const struct drm_format_info gen12_ccs_cc_formats[] = {
> > + { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 3,
> > + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
> > + { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 3,
> > + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, },
> > + { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 3,
> > + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
> > + { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 3,
> > + .cpp = { 4, 1, 0, }, .hsub = 2, .vsub = 32, .has_alpha = true },
> > +};
> > +
> > static const struct drm_format_info * lookup_format_info(const
> > struct drm_format_info formats[],
> > int num_formats, u32 format)
> > @@ -2578,6 +2611,10 @@ intel_get_format_info(const struct
> drm_mode_fb_cmd2 *cmd)
> > return lookup_format_info(gen12_ccs_formats,
> > ARRAY_SIZE(gen12_ccs_formats),
> > cmd->pixel_format);
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > + return lookup_format_info(gen12_ccs_cc_formats,
> > + ARRAY_SIZE(gen12_ccs_cc_formats),
> > + cmd->pixel_format);
> > default:
> > return NULL;
> > }
> > @@ -2586,6 +2623,7 @@ intel_get_format_info(const struct
> > drm_mode_fb_cmd2 *cmd) bool is_ccs_modifier(u64 modifier) {
> > return modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
> > + modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ||
> > modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> > modifier == I915_FORMAT_MOD_Yf_TILED_CCS; } @@ -2798,6
> > +2836,18 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
> > int x, y;
> > int ret;
> >
> > + /*
> > + * Plane 2 of Render Compression with Clear Color fb modifier
> > + * is consumed by the driver and not passed to DE. Skip the
> > + * arithmetic related to alignment and offset calculation.
> > + */
> > + if (i == 2 && fb->modifier ==
> > +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
>
> This line should be wrapped.
Sure will include in final rev.
>
> > + if (IS_ALIGNED(fb->offsets[2], PAGE_SIZE))
> > + continue;
> > + else
> > + return -EINVAL;
> > + }
> > +
> > cpp = fb->format->cpp[i];
> > width = drm_framebuffer_plane_width(fb->width, fb, i);
> > height = drm_framebuffer_plane_height(fb->height, fb, i); @@
> > -4295,6 +4345,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)
> > case I915_FORMAT_MOD_Y_TILED:
> > return PLANE_CTL_TILED_Y;
> > case I915_FORMAT_MOD_Y_TILED_CCS:
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > return PLANE_CTL_TILED_Y |
> PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
> > case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> > return PLANE_CTL_TILED_Y |
> > @@ -15245,6 +15296,15 @@ static int intel_plane_pin_fb(struct
> > intel_plane_state *plane_state)
> >
> > plane_state->vma = vma;
> >
> > + if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {
> > + u32 *ccaddr =
> kmap_atomic(i915_gem_object_get_page(intel_fb_obj(fb),
> > + fb-
> >offsets[2] >> PAGE_SHIFT));
> > +
> > + plane_state->ccval = ((u64)*(ccaddr + CC_VAL_HIGHER_OFFSET)
> << 32)
> > + | *(ccaddr + CC_VAL_LOWER_OFFSET);
>
> Isn't this just the same thing as
>
> u64 *ccaddr = kmap_atomic(...);
> plane_state->ccval = ccaddr[2];
>
> ?
I think it is ccval = ccaddr[5] << 32 | ccaddr[4]?
Is this preferred?
Thanks,
Radhakrishna(RK) Sripada
>
> > + kunmap_atomic(ccaddr);
> > + }
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 83ea04149b77..e1bd18122ce6 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -607,6 +607,9 @@ struct intel_plane_state {
> > u32 planar_slave;
> >
> > struct drm_intel_sprite_colorkey ckey;
> > +
> > + /* Clear Color Value */
> > + u64 ccval;
> > };
> >
> > struct intel_initial_plane_config {
> > diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c
> > b/drivers/gpu/drm/i915/display/intel_sprite.c
> > index 67a90059900f..89f7fbc87ad9 100644
> > --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> > +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> > @@ -597,6 +597,7 @@ skl_program_plane(struct intel_plane *plane,
> > unsigned long irqflags;
> > u32 keymsk, keymax;
> > u32 plane_ctl = plane_state->ctl;
> > + u64 ccval = plane_state->ccval;
> >
> > plane_ctl |= skl_plane_ctl_crtc(crtc_state);
> >
> > @@ -639,6 +640,10 @@ skl_program_plane(struct intel_plane *plane,
> > if (fb->format->is_yuv && icl_is_hdr_plane(dev_priv, plane_id))
> > icl_program_input_csc(plane, crtc_state, plane_state);
> >
> > + if (fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
> > + intel_uncore_write64_fw(&dev_priv->uncore,
> > + PLANE_CC_VAL(pipe, plane_id), ccval);
> > +
> > skl_write_plane_wm(plane, crtc_state);
> >
> > I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value); @@
> > -2106,7 +2111,8 @@ static int skl_plane_check_fb(const struct
> intel_crtc_state *crtc_state,
> > fb->modifier == I915_FORMAT_MOD_Yf_TILED ||
> > fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
> > fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS ||
> > - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS)) {
> > + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ||
> > + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC))
> {
> > DRM_DEBUG_KMS("Y/Yf tiling not supported in IF-ID mode\n");
> > return -EINVAL;
> > }
> > @@ -2579,6 +2585,7 @@ static const u64
> > skl_plane_format_modifiers_ccs[] = {
> >
> > static const u64 gen12_plane_format_modifiers_ccs[] = {
> > I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS,
> > + I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC,
> > I915_FORMAT_MOD_Y_TILED,
> > I915_FORMAT_MOD_X_TILED,
> > DRM_FORMAT_MOD_LINEAR,
> > @@ -2750,6 +2757,7 @@ static bool
> gen12_plane_format_mod_supported(struct drm_plane *_plane,
> > case I915_FORMAT_MOD_X_TILED:
> > case I915_FORMAT_MOD_Y_TILED:
> > case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS:
> > + case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC:
> > break;
> > default:
> > return false;
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h
> > b/drivers/gpu/drm/i915/i915_reg.h index 2e444a18ed0b..4a683db267c1
> > 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -6840,6 +6840,8 @@ enum {
> > #define _PLANE_KEYMAX_1_A 0x701a0
> > #define _PLANE_KEYMAX_2_A 0x702a0
> > #define PLANE_KEYMAX_ALPHA(a) ((a) << 24)
> > +#define _PLANE_CC_VAL_1_A 0x701b4
> > +#define _PLANE_CC_VAL_2_A 0x702b4
> > #define _PLANE_AUX_DIST_1_A 0x701c0
> > #define _PLANE_AUX_DIST_2_A 0x702c0
> > #define _PLANE_AUX_OFFSET_1_A 0x701c4
> > @@ -6879,6 +6881,16 @@ enum {
> > #define _PLANE_NV12_BUF_CFG_1_A 0x70278
> > #define _PLANE_NV12_BUF_CFG_2_A 0x70378
> >
> > +#define _PLANE_CC_VAL_1_B 0x711b4
> > +#define _PLANE_CC_VAL_2_B 0x712b4
> > +#define _PLANE_CC_VAL_1(pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A,
> _PLANE_CC_VAL_1_B)
> > +#define _PLANE_CC_VAL_2(pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A,
> _PLANE_CC_VAL_2_B)
> > +#define PLANE_CC_VAL(pipe, plane) \
> > + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe),
> _PLANE_CC_VAL_2(pipe))
> > +
> > +#define CC_VAL_LOWER_OFFSET 4
> > +#define CC_VAL_HIGHER_OFFSET 5
> > +
> > /* Input CSC Register Definitions */
> > #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0
> > #define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0
> > --
> > 2.20.1
> >
>
> --
> Matt Roper
> Graphics Software Engineer
> VTT-OSGC Platform Enablement
> Intel Corporation
> (916) 356-2795
More information about the Intel-gfx
mailing list