[Intel-gfx] [PATCH 2/2] drm/i915: Rename "inject_load_failure" module parameter

[Janusz Krzysztofik]

Commit f2db53f14d3d ("drm/i915: Replace "_load" with "_probe"
consequently") deliberately left the name of the module parameter
unchanged as that would require a corresponding change on IGT size.
Now as the IGT side change has been submitted, complete the switch to
the "probe" nomenclature.

May affect custom user applications utilizing the old name.

Suggested-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik at linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko at intel.com>
Cc: Michał Winiarski <michal.winiarski at intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski at intel.com>
Cc: Tomasz Lis <tomasz.lis at intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_params.c |  2 +-
 drivers/gpu/drm/i915/i915_params.h |  2 +-
 drivers/gpu/drm/i915/i915_utils.c  | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index 296452f9efe4..59a6586dae15 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -165,7 +165,7 @@ i915_param_named_unsafe(enable_dp_mst, bool, 0600,
 	"Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");
 
 #if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
-i915_param_named_unsafe(inject_load_failure, uint, 0400,
+i915_param_named_unsafe(inject_probe_failure, uint, 0400,
 	"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
 #endif
 
diff --git a/drivers/gpu/drm/i915/i915_params.h b/drivers/gpu/drm/i915/i915_params.h
index d29ade3b7de6..8c887413fc70 100644
--- a/drivers/gpu/drm/i915/i915_params.h
+++ b/drivers/gpu/drm/i915/i915_params.h
@@ -62,7 +62,7 @@ struct drm_printer;
 	param(int, mmio_debug, -IS_ENABLED(CONFIG_DRM_I915_DEBUG_MMIO)) \
 	param(int, edp_vswing, 0) \
 	param(int, reset, 2) \
-	param(unsigned int, inject_load_failure, 0) \
+	param(unsigned int, inject_probe_failure, 0) \
 	param(int, fastboot, -1) \
 	param(int, enable_dpcd_backlight, 0) \
 	param(char *, force_probe, CONFIG_DRM_I915_FORCE_PROBE) \
diff --git a/drivers/gpu/drm/i915/i915_utils.c b/drivers/gpu/drm/i915/i915_utils.c
index e51bdb05da14..64affb87c284 100644
--- a/drivers/gpu/drm/i915/i915_utils.c
+++ b/drivers/gpu/drm/i915/i915_utils.c
@@ -57,22 +57,22 @@ static unsigned int i915_probe_fail_count;
 int __i915_inject_probe_error(struct drm_i915_private *i915, int err,
 			      const char *func, int line)
 {
-	if (i915_probe_fail_count >= i915_modparams.inject_load_failure)
+	if (i915_probe_fail_count >= i915_modparams.inject_probe_failure)
 		return 0;
 
-	if (++i915_probe_fail_count < i915_modparams.inject_load_failure)
+	if (++i915_probe_fail_count < i915_modparams.inject_probe_failure)
 		return 0;
 
 	__i915_printk(i915, KERN_INFO,
 		      "Injecting failure %d at checkpoint %u [%s:%d]\n",
-		      err, i915_modparams.inject_load_failure, func, line);
-	i915_modparams.inject_load_failure = 0;
+		      err, i915_modparams.inject_probe_failure, func, line);
+	i915_modparams.inject_probe_failure = 0;
 	return err;
 }
 
 bool i915_error_injected(void)
 {
-	return i915_probe_fail_count && !i915_modparams.inject_load_failure;
+	return i915_probe_fail_count && !i915_modparams.inject_probe_failure;
 }
 
 #endif
-- 
2.21.0