[Intel-gfx] [PATCH 14/24] drm/i915/dp: Allow big joiner modes in intel_dp_mode_valid(), v2.
Maarten Lankhorst
maarten.lankhorst at linux.intel.com
Fri Oct 4 11:35:04 UTC 2019
Small changes to intel_dp_mode_valid(), allow listing modes that
can only be supported in the bigjoiner configuration, which is
not supported yet.
eDP does not support bigjoiner, so do not expose bigjoiner only
modes on the eDP port.
Changes since v1:
- Disallow bigjoiner on eDP.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_dp.c | 92 +++++++++++++++++++------
1 file changed, 72 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4297738655c6..5c7323af08b3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -244,7 +244,7 @@ intel_dp_max_data_rate(int max_link_clock, int max_lanes)
}
static int
-intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
+intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp, bool allow_bigjoiner)
{
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct intel_encoder *encoder = &intel_dig_port->base;
@@ -254,6 +254,9 @@ intel_dp_downstream_max_dotclock(struct intel_dp *intel_dp)
int type = intel_dp->downstream_ports[0] & DP_DS_PORT_TYPE_MASK;
+ if (allow_bigjoiner && INTEL_GEN(dev_priv) >= 11)
+ max_dotclk *= 2;
+
if (type != DP_DS_PORT_TYPE_VGA)
return max_dotclk;
@@ -506,7 +509,8 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
u32 link_clock, u32 lane_count,
- u32 mode_clock, u32 mode_hdisplay)
+ u32 mode_clock, u32 mode_hdisplay,
+ bool bigjoiner)
{
u32 bits_per_pixel, max_bpp_small_joiner_ram;
int i;
@@ -524,6 +528,10 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
mode_hdisplay;
+
+ if (bigjoiner)
+ max_bpp_small_joiner_ram *= 2;
+
DRM_DEBUG_KMS("Max small joiner bpp: %u\n", max_bpp_small_joiner_ram);
/*
@@ -532,6 +540,15 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
*/
bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
+ if (bigjoiner) {
+ u32 max_bpp_bigjoiner =
+ i915->max_cdclk_freq * 48 /
+ intel_dp_mode_to_fec_clock(mode_clock);
+
+ DRM_DEBUG_KMS("Max big joiner bpp: %u\n", max_bpp_bigjoiner);
+ bits_per_pixel = min(bits_per_pixel, max_bpp_bigjoiner);
+ }
+
/* Error out if the max bpp is less than smallest allowed valid bpp */
if (bits_per_pixel < valid_dsc_bpp[0]) {
DRM_DEBUG_KMS("Unsupported BPP %u, min %u\n",
@@ -554,7 +571,8 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
}
static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
- int mode_clock, int mode_hdisplay)
+ int mode_clock, int mode_hdisplay,
+ bool bigjoiner)
{
u8 min_slice_count, i;
int max_slice_width;
@@ -579,12 +597,20 @@ static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
/* Find the closest match to the valid slice count values */
for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
- if (valid_dsc_slicecount[i] >
- drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
- false))
+ u8 test_slice_count = bigjoiner ?
+ 2 * valid_dsc_slicecount[i] :
+ valid_dsc_slicecount[i];
+
+ if (test_slice_count >
+ drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, false))
break;
- if (min_slice_count <= valid_dsc_slicecount[i])
- return valid_dsc_slicecount[i];
+
+ /* big joiner needs small joiner to be enabled */
+ if (bigjoiner && test_slice_count < 4)
+ continue;
+
+ if (min_slice_count <= test_slice_count)
+ return test_slice_count;
}
DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
@@ -604,11 +630,15 @@ intel_dp_mode_valid(struct drm_connector *connector,
int max_dotclk;
u16 dsc_max_output_bpp = 0;
u8 dsc_slice_count = 0;
+ bool dsc = false, bigjoiner = false;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
- max_dotclk = intel_dp_downstream_max_dotclock(intel_dp);
+ if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+ return MODE_H_ILLEGAL;
+
+ max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, false);
if (intel_dp_is_edp(intel_dp) && fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
@@ -620,6 +650,21 @@ intel_dp_mode_valid(struct drm_connector *connector,
target_clock = fixed_mode->clock;
}
+ if (mode->clock < 10000)
+ return MODE_CLOCK_LOW;
+
+ if (target_clock > max_dotclk) {
+ if (intel_dp_is_edp(intel_dp))
+ return MODE_CLOCK_HIGH;
+
+ max_dotclk = intel_dp_downstream_max_dotclock(intel_dp, true);
+
+ if (target_clock > max_dotclk)
+ return MODE_CLOCK_HIGH;
+
+ bigjoiner = true;
+ }
+
max_link_clock = intel_dp_max_link_rate(intel_dp);
max_lanes = intel_dp_max_lane_count(intel_dp);
@@ -644,23 +689,28 @@ intel_dp_mode_valid(struct drm_connector *connector,
max_link_clock,
max_lanes,
target_clock,
- mode->hdisplay) >> 4;
+ mode->hdisplay,
+ bigjoiner) >> 4;
dsc_slice_count =
intel_dp_dsc_get_slice_count(intel_dp,
target_clock,
- mode->hdisplay);
+ mode->hdisplay,
+ bigjoiner);
}
+
+ dsc = dsc_max_output_bpp && dsc_slice_count;
}
- if ((mode_rate > max_rate && !(dsc_max_output_bpp && dsc_slice_count)) ||
- target_clock > max_dotclk)
+ /* big joiner configuration needs DSC */
+ if (bigjoiner && !dsc) {
+ DRM_DEBUG_KMS("Link clock needs bigjoiner, but DSC or FEC not available\n");
return MODE_CLOCK_HIGH;
+ }
- if (mode->clock < 10000)
- return MODE_CLOCK_LOW;
-
- if (mode->flags & DRM_MODE_FLAG_DBLCLK)
- return MODE_H_ILLEGAL;
+ if (mode_rate > max_rate && !dsc) {
+ DRM_DEBUG_KMS("Cannot drive without DSC\n");
+ return MODE_CLOCK_HIGH;
+ }
return intel_mode_valid_max_plane_size(dev_priv, mode);
}
@@ -2072,11 +2122,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
pipe_config->port_clock,
pipe_config->lane_count,
adjusted_mode->crtc_clock,
- adjusted_mode->crtc_hdisplay);
+ adjusted_mode->crtc_hdisplay,
+ false);
dsc_dp_slice_count =
intel_dp_dsc_get_slice_count(intel_dp,
adjusted_mode->crtc_clock,
- adjusted_mode->crtc_hdisplay);
+ adjusted_mode->crtc_hdisplay,
+ false);
if (!dsc_max_output_bpp || !dsc_dp_slice_count) {
DRM_DEBUG_KMS("Compressed BPP/Slice Count not supported\n");
return -EINVAL;
--
2.23.0
More information about the Intel-gfx
mailing list