[Intel-gfx] [PATCH 3/7] drm/i915: fix port checks for MST support on gen >= 11

[Ville Syrjälä]

On Thu, Oct 10, 2019 at 06:09:03PM -0700, Lucas De Marchi wrote:
> Both Ice Lake and Elkhart Lake (gen 11) support MST on all external
> connections except DDI A. Tiger Lake (gen 12) supports on all external
> connections.
> 
> Move the check to happen inside intel_dp_mst_encoder_init() and add
> specific platform checks.
> 
> Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c     |  7 ++-----
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 15 +++++++++++++--
>  2 files changed, 15 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0e45c61d7331..348a09890611 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7268,11 +7268,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>  		intel_connector->get_hw_state = intel_connector_get_hw_state;
>  
>  	/* init MST on ports that can support it */
> -	if (HAS_DP_MST(dev_priv) && !intel_dp_is_edp(intel_dp) &&
> -	    (port == PORT_B || port == PORT_C ||
> -	     port == PORT_D || port == PORT_F))
> -		intel_dp_mst_encoder_init(intel_dig_port,
> -					  intel_connector->base.base.id);
> +	intel_dp_mst_encoder_init(intel_dig_port,
> +				  intel_connector->base.base.id);
>  
>  	if (!intel_edp_init_connector(intel_dp, intel_connector)) {
>  		intel_dp_aux_fini(intel_dp);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index c2bbba1effc1..8dcb578e6d01 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -654,15 +654,26 @@ intel_dp_mst_encoder_active_links(struct intel_digital_port *intel_dig_port)
>  void
>  intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_base_id)
>  {
> +	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
>  	struct intel_dp *intel_dp = &intel_dig_port->dp;
> -	struct drm_device *dev = intel_dig_port->base.base.dev;
> +	enum port port = intel_dig_port->base.port;
>  	int ret;
>  
> +	if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp))
> +		return;
> +
> +	if (INTEL_GEN(i915) == 11 && port == PORT_A)
> +		return;
> +
> +	if (INTEL_GEN(i915) < 11 &&
> +	    port != PORT_B && port != PORT_C && port != PORT_D && port != PORT_F)
> +		return;

This == vs. != is rather hard on the poor old brain.

If we replace the latter with '==PORT_A || ==PORT_E'
I think it'll be easier to grasp what's going on.

> +
>  	intel_dp->mst_mgr.cbs = &mst_cbs;
>  
>  	/* create encoders */
>  	intel_dp_create_fake_mst_encoders(intel_dig_port);
> -	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, dev,
> +	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm,
>  					   &intel_dp->aux, 16, 3, conn_base_id);
>  	if (ret) {
>  		intel_dp->can_mst = false;
> -- 
> 2.23.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel