[Intel-gfx] [RFC 5/7] drm/i915/dsi: Configure TE interrupt for cmd mode

[Ramalingam C]

On 2019-10-14 at 16:31:20 +0530, Vandita Kulkarni wrote:
> We need to configure TE interrupt in two places.
> Port interrupt and DSI interrupt mask registers.
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c | 49 ++++++++++++++++++++++++++++++++-
>  1 file changed, 48 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 3af7f7914c40..bfb2a63504fb 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -41,6 +41,7 @@
>  #include "display/intel_hotplug.h"
>  #include "display/intel_lpe_audio.h"
>  #include "display/intel_psr.h"
> +#include "display/intel_dsi.h"
>  
>  #include "gt/intel_gt.h"
>  #include "gt/intel_gt_irq.h"
> @@ -2960,12 +2961,44 @@ int ilk_enable_vblank(struct drm_crtc *crtc)
>  	return 0;
>  }
>  
> +static void gen11_dsi_configure_te(struct drm_crtc *crtc, bool enable)
> +{
> +	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	struct intel_encoder *encoder = NULL;
> +	struct intel_dsi *intel_dsi;
> +	enum port port;
> +	u32 tmp;
> +
> +	encoder = gen11_dsi_find_cmd_mode_encoder(intel_crtc);
> +	if (!encoder)
> +		return;
> +
> +	intel_dsi = enc_to_intel_dsi(&encoder->base);
> +	/* Assuming single link would always be enabled on PORT_A */
> +	port = (intel_dsi->ports & BIT(PORT_B) & BIT(PORT_A)) ? PORT_B : PORT_A;
> +	tmp =  I915_READ(ICL_DSI_INTR_MASK_REG(port));
> +	if (enable)
> +		tmp &= ~ICL_TE_EVENT;
> +	else
> +		tmp |= ICL_TE_EVENT;
> +
> +	I915_WRITE(ICL_DSI_INTR_MASK_REG(port), tmp);
> +}
> +
>  int bdw_enable_vblank(struct drm_crtc *crtc)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>  	enum pipe pipe = to_intel_crtc(crtc)->pipe;
>  	unsigned long irqflags;
>  
> +	if (INTEL_GEN(dev_priv) >= 11 &&
> +		(intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DSI))) {
usually second line of the condition will be aligned to the start of the
first char in first line.
> +		gen11_dsi_configure_te(crtc, true);
> +		return 0;
> +	}
> +
>  	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
>  	bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
>  	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> @@ -3031,9 +3064,16 @@ void ilk_disable_vblank(struct drm_crtc *crtc)
>  void bdw_disable_vblank(struct drm_crtc *crtc)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> -	enum pipe pipe = to_intel_crtc(crtc)->pipe;
> +	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
> +	enum pipe pipe = intel_crtc->pipe;
>  	unsigned long irqflags;
>  
> +	if (INTEL_GEN(dev_priv) >= 11 &&
> +		(intel_crtc_has_type(intel_crtc->config, INTEL_OUTPUT_DSI))) {
same here.

-Ram
> +		gen11_dsi_configure_te(crtc, false);
> +		return;
> +	}
> +
>  	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
>  	bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
>  	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
> @@ -3726,6 +3766,13 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  		gen3_assert_iir_is_zero(uncore, EDP_PSR_IIR);
>  	}
>  
> +	if (INTEL_GEN(dev_priv) >= 11) {
> +		enum port port;
> +
> +		if (intel_bios_is_dsi_present(dev_priv, &port))
> +			de_port_masked |= ICL_DSI_0 | ICL_DSI_1;
> +	}
> +
>  	for_each_pipe(dev_priv, pipe) {
>  		dev_priv->de_irq_mask[pipe] = ~de_pipe_masked;
>  
> -- 
> 2.21.0.5.gaeb582a
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx