[Intel-gfx] [CI v12 6/6] drm/i915/display/icl: In port sync mode disable slaves first then master

[Manasi Navare]

Pushed to dinq, thanks for reviews

manasi

On Fri, Oct 18, 2019 at 10:27:25AM -0700, Manasi Navare wrote:
> In the transcoder port sync mode, the slave transcoders mask their vblanks
> until master transcoder's vblank so while disabling them, make
> sure slaves are disabled first and then the masters.
> 
> v5:
> * Dont pass dev priv to get_slave_crtc (Ville)
> v4:
> * Obtain slave state from master (Maarten)
> v3:
> * Rebase
> v2:
> * Use the intel_old_crtc_state_disables() helper
> 
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> Cc: Matt Roper <matthew.d.roper at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Manasi Navare <manasi.d.navare at intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 58 ++++++++++++++++++--
>  1 file changed, 52 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 22f5b213b80b..b57c9806b585 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -14130,6 +14130,37 @@ static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
>  						     new_crtc_state);
>  }
>  
> +static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
> +						   struct intel_crtc *crtc,
> +						   struct intel_crtc_state *old_crtc_state,
> +						   struct intel_crtc_state *new_crtc_state)
> +{
> +	struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
> +	struct intel_crtc_state *new_slave_crtc_state =
> +		intel_atomic_get_new_crtc_state(state, slave_crtc);
> +	struct intel_crtc_state *old_slave_crtc_state =
> +		intel_atomic_get_old_crtc_state(state, slave_crtc);
> +
> +	WARN_ON(!slave_crtc || !new_slave_crtc_state ||
> +		!old_slave_crtc_state);
> +
> +	/* Disable Slave first */
> +	intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
> +	if (old_slave_crtc_state->base.active)
> +		intel_old_crtc_state_disables(state,
> +					      old_slave_crtc_state,
> +					      new_slave_crtc_state,
> +					      slave_crtc);
> +
> +	/* Disable Master */
> +	intel_pre_plane_update(old_crtc_state, new_crtc_state);
> +	if (old_crtc_state->base.active)
> +		intel_old_crtc_state_disables(state,
> +					      old_crtc_state,
> +					      new_crtc_state,
> +					      crtc);
> +}
> +
>  static void intel_commit_modeset_disables(struct intel_atomic_state *state)
>  {
>  	struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> @@ -14148,13 +14179,28 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
>  		if (!needs_modeset(new_crtc_state))
>  			continue;
>  
> -		intel_pre_plane_update(old_crtc_state, new_crtc_state);
> +		/* In case of Transcoder port Sync master slave CRTCs can be
> +		 * assigned in any order and we need to make sure that
> +		 * slave CRTCs are disabled first and then master CRTC since
> +		 * Slave vblanks are masked till Master Vblanks.
> +		 */
> +		if (is_trans_port_sync_mode(new_crtc_state)) {
> +			if (is_trans_port_sync_master(new_crtc_state))
> +				intel_trans_port_sync_modeset_disables(state,
> +								       crtc,
> +								       old_crtc_state,
> +								       new_crtc_state);
> +			else
> +				continue;
> +		} else {
> +			intel_pre_plane_update(old_crtc_state, new_crtc_state);
>  
> -		if (old_crtc_state->base.active)
> -			intel_old_crtc_state_disables(state,
> -						      old_crtc_state,
> -						      new_crtc_state,
> -						      crtc);
> +			if (old_crtc_state->base.active)
> +				intel_old_crtc_state_disables(state,
> +							      old_crtc_state,
> +							      new_crtc_state,
> +							      crtc);
> +		}
>  	}
>  }
>  
> -- 
> 2.19.1
>