[Intel-gfx] [PATCH 1/3] drm: Introduce scaling filter mode property
Sharma, Shashank
shashank.sharma at intel.com
Tue Oct 22 15:21:20 UTC 2019
On 10/22/2019 5:56 PM, Ville Syrjälä wrote:
> On Tue, Oct 22, 2019 at 03:29:44PM +0530, Shashank Sharma wrote:
>> This patch adds a scaling filter mode porperty
>> to allow:
>> - A driver/HW to showcase it's scaling filter capabilities.
>> - A userspace to pick a desired effect while scaling.
>>
>> This option will be particularly useful in the scenarios where
>> Integer mode scaling is possible, and a UI client wants to pick
>> filters like Nearest-neighbor applied for non-blurry outputs.
>>
>> There was a RFC patch series published, to discus the request to enable
>> Integer mode scaling by some of the gaming communities, which can be
>> found here:
>> https://patchwork.freedesktop.org/series/66175/
>>
>> Signed-off-by: Shashank Sharma <shashank.sharma at intel.com>
>> ---
>> drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++
>> include/drm/drm_crtc.h | 26 ++++++++++++++++++++++++++
>> include/drm/drm_mode_config.h | 6 ++++++
>> 3 files changed, 36 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
>> index 0d466d3b0809..883329453a86 100644
>> --- a/drivers/gpu/drm/drm_atomic_uapi.c
>> +++ b/drivers/gpu/drm/drm_atomic_uapi.c
>> @@ -435,6 +435,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,
>> return ret;
>> } else if (property == config->prop_vrr_enabled) {
>> state->vrr_enabled = val;
>> + } else if (property == config->scaling_filter_property) {
>> + state->scaling_filter = val;
>> } else if (property == config->degamma_lut_property) {
>> ret = drm_atomic_replace_property_blob_from_id(dev,
>> &state->degamma_lut,
>> @@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc,
>> *val = (state->gamma_lut) ? state->gamma_lut->base.id : 0;
>> else if (property == config->prop_out_fence_ptr)
>> *val = 0;
>> + else if (property == config->scaling_filter_property)
>> + *val = state->scaling_filter;
>> else if (crtc->funcs->atomic_get_property)
>> return crtc->funcs->atomic_get_property(crtc, state, property, val);
>> else
>> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
>> index 5e9b15a0e8c5..94c5509474a8 100644
>> --- a/include/drm/drm_crtc.h
>> +++ b/include/drm/drm_crtc.h
>> @@ -58,6 +58,25 @@ struct device_node;
>> struct dma_fence;
>> struct edid;
>>
>> +enum drm_scaling_filters {
>> + DRM_SCALING_FILTER_DEFAULT,
>> + DRM_SCALING_FILTER_MEDIUM,
>> + DRM_SCALING_FILTER_BILINEAR,
>> + DRM_SCALING_FILTER_NN,
>> + DRM_SCALING_FILTER_NN_IS_ONLY,
>> + DRM_SCALING_FILTER_EDGE_ENHANCE,
>> + DRM_SCALING_FILTER_INVALID,
>> +};
>> +
>> +static const struct drm_prop_enum_list drm_scaling_filter_enum_list[] = {
>> + { DRM_SCALING_FILTER_DEFAULT, "Default" },
>> + { DRM_SCALING_FILTER_MEDIUM, "Medium" },
>> + { DRM_SCALING_FILTER_BILINEAR, "Bilinear" },
>> + { DRM_SCALING_FILTER_NN, "Nearest Neighbor" },
>> + { DRM_SCALING_FILTER_NN_IS_ONLY, "Integer Mode Scaling" },
>> + { DRM_SCALING_FILTER_INVALID, "Invalid" },
>> +};
>> +
>> static inline int64_t U642I64(uint64_t val)
>> {
>> return (int64_t)*((int64_t *)&val);
>> @@ -283,6 +302,13 @@ struct drm_crtc_state {
>> */
>> u32 target_vblank;
>>
>> + /**
>> + * @scaling_filter:
>> + *
>> + * Scaling filter mode to be applied
>> + */
>> + u32 scaling_filter;
>> +
>> /**
>> * @async_flip:
>> *
>> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
>> index 3bcbe30339f0..efd6fd55770f 100644
>> --- a/include/drm/drm_mode_config.h
>> +++ b/include/drm/drm_mode_config.h
>> @@ -914,6 +914,12 @@ struct drm_mode_config {
>> */
>> struct drm_property *modifiers_property;
>>
>> + /**
>> + * @scaling_filter_property: CRTC property to apply a particular filter
>> + * while scaling in panel fitter mode.
>> + */
>> + struct drm_property *scaling_filter_property;
> This needs to per-crtc/plane.
I am not getting this, why ? It's not different than any other CRTC
property like gamma/CSC etc, where we just attach them to corresponding
CRTC, isn't it ?
- Shashank
>> +
>> /* cursor size */
>> uint32_t cursor_width, cursor_height;
>>
>> --
>> 2.17.1
More information about the Intel-gfx
mailing list