[Intel-gfx] [RFC 1/1] drm/i915/dsi: Add dsi_state in crtc_state

[Ville Syrjälä]

On Wed, Oct 16, 2019 at 06:22:36PM +0530, Vandita Kulkarni wrote:
> This patch add dsi_state which provides
> dsi operation mode and the link mode.
> These are needed in order to check if they
> were differently configured by GOP.
> 
> In present case the GOP enables dsi in
> periodic update mode, whereas we need
> to enable it in TE_GATE command mode.
> In which case a disable-enable sequence
> would be required.
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c        | 39 +++++++++++++++++++
>  .../drm/i915/display/intel_display_types.h    | 12 ++++++
>  2 files changed, 51 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 6e398c33a524..0a9323e95866 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1238,6 +1238,37 @@ static void gen11_dsi_get_timings(struct intel_encoder *encoder,
>  	adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
>  }
>  
> +static bool
> +gen11_dsi_dual_link_enabled(struct drm_i915_private *dev_priv)
> +{
> +	u32 val1, val2;
> +
> +	val1 = I915_READ(PIPECONF(TRANSCODER_DSI_0)) &
> +		I915_READ(PIPECONF(TRANSCODER_DSI_1));
> +	val1 &= PIPECONF_ENABLE;
> +
> +	val2 = I915_READ(TRANS_DDI_FUNC_CTL2(TRANSCODER_DSI_0));
> +	val2 &= PORT_SYNC_MODE_ENABLE;
> +
> +	return (val1 && val2);
> +}
> +
> +static enum dsi_op_mode
> +gen11_dsi_get_op_mode(struct drm_i915_private *dev_priv,
> +		      struct intel_dsi *intel_dsi)
> +{
> +	u32 val;
> +	enum transcoder dsi_trans;
> +
> +	if (intel_dsi->ports == BIT(PORT_B))
> +		dsi_trans = TRANSCODER_DSI_1;
> +	else
> +		dsi_trans = TRANSCODER_DSI_0;
> +
> +	val = I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans));
> +	return ((val &= OP_MODE_MASK) >> OP_MODE_SHIFT);
> +}
> +
>  static void gen11_dsi_get_config(struct intel_encoder *encoder,
>  				 struct intel_crtc_state *pipe_config)
>  {
> @@ -1250,6 +1281,12 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
>  		cnl_calc_wrpll_link(dev_priv, &pipe_config->dpll_hw_state);
>  
>  	pipe_config->base.adjusted_mode.crtc_clock = intel_dsi->pclk;
> +
> +	pipe_config->dsi_state.dual_link_mode =
> +				gen11_dsi_dual_link_enabled(dev_priv);
> +	pipe_config->dsi_state.op_mode =
> +				gen11_dsi_get_op_mode(dev_priv, intel_dsi);
> +
>  	if (intel_dsi->dual_link)
>  		pipe_config->base.adjusted_mode.crtc_clock *= 2;
>  
> @@ -1283,6 +1320,8 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
>  	else
>  		pipe_config->cpu_transcoder = TRANSCODER_DSI_0;
>  
> +	pipe_config->dsi_state.op_mode = DSI_CMD_MODE_NO_GATE;
> +	pipe_config->dsi_state.dual_link_mode = intel_dsi->dual_link;
>  	pipe_config->clock_set = true;
>  	pipe_config->port_clock = intel_dsi_bitrate(intel_dsi) / 5;
>  
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 40390d855815..f89917eb4b94 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -75,6 +75,13 @@ enum hdmi_force_audio {
>  	HDMI_AUDIO_ON,			/* force turn on HDMI audio */
>  };
>  
> +enum dsi_op_mode {
> +	DSI_CMD_MODE_NO_GATE,
> +	DSI_CMD_MODE_TE_GATE,
> +	DSI_CMD_MODE_PERIODIC,
> +	DSI_VIDEO_MODE,
> +	};
> +
>  /* "Broadcast RGB" property */
>  enum intel_broadcast_rgb {
>  	INTEL_BROADCAST_RGB_AUTO,
> @@ -861,6 +868,11 @@ struct intel_crtc_state {
>  		u32 ctrl, div;
>  	} dsi_pll;
>  
> +	struct {
> +		enum dsi_op_mode op_mode;
> +		bool dual_link_mode;

'dual_link' seems sufficient. And we should share that with LVDS.

Another easy target for moving to the crtc state is the lane count.
In fact we already have it in the state, but the DSI code has just
stubbornly decided to ingore it.

> +	} dsi_state;
> +
>  	int pipe_bpp;
>  	struct intel_link_m_n dp_m_n;
>  
> -- 
> 2.21.0.5.gaeb582a
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel