[Intel-gfx] [PATCH v2 4/5] drm/dsi: rename MIPI_DCS_SET_PARTIAL_AREA to MIPI_DCS_SET_PARTIAL_ROWS

[Jani Nikula]

The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.

v2: add comment about the rename (David Lechner)

Cc: David Lechner <david at lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/tiny/st7586.c | 2 +-
 include/video/mipi_display.h  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tiny/st7586.c b/drivers/gpu/drm/tiny/st7586.c
index 3cc21a1b30c8..060cc756194f 100644
--- a/drivers/gpu/drm/tiny/st7586.c
+++ b/drivers/gpu/drm/tiny/st7586.c
@@ -240,7 +240,7 @@ static void st7586_pipe_enable(struct drm_simple_display_pipe *pipe,
 
 	mipi_dbi_command(dbi, ST7586_SET_DISP_DUTY, 0x7f);
 	mipi_dbi_command(dbi, ST7586_SET_PART_DISP, 0xa0);
-	mipi_dbi_command(dbi, MIPI_DCS_SET_PARTIAL_AREA, 0x00, 0x00, 0x00, 0x77);
+	mipi_dbi_command(dbi, MIPI_DCS_SET_PARTIAL_ROWS, 0x00, 0x00, 0x00, 0x77);
 	mipi_dbi_command(dbi, MIPI_DCS_EXIT_INVERT_MODE);
 
 	msleep(100);
diff --git a/include/video/mipi_display.h b/include/video/mipi_display.h
index 928f8c4b6658..b6d8b874233f 100644
--- a/include/video/mipi_display.h
+++ b/include/video/mipi_display.h
@@ -108,7 +108,7 @@ enum {
 	MIPI_DCS_WRITE_MEMORY_START	= 0x2C,
 	MIPI_DCS_WRITE_LUT		= 0x2D,
 	MIPI_DCS_READ_MEMORY_START	= 0x2E,
-	MIPI_DCS_SET_PARTIAL_AREA	= 0x30,
+	MIPI_DCS_SET_PARTIAL_ROWS	= 0x30,		/* MIPI DCS 1.02 - MIPI_DCS_SET_PARTIAL_AREA before that */
 	MIPI_DCS_SET_PARTIAL_COLUMNS	= 0x31,
 	MIPI_DCS_SET_SCROLL_AREA	= 0x33,
 	MIPI_DCS_SET_TEAR_OFF		= 0x34,
-- 
2.20.1