[Intel-gfx] [PATCH v2 15/17] drm/gma500: Stop using mode->private_flags

Ville Syrjälä ville.syrjala at linux.intel.com
Tue Apr 7 19:08:00 UTC 2020


On Tue, Apr 07, 2020 at 08:56:53PM +0200, Sam Ravnborg wrote:
> Hi Ville.
> 
> On Fri, Apr 03, 2020 at 11:40:06PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > 
> > gma500 only uses mode->private_flags to convey the sdvo pixel
> > multiplier from the encoder .mode_fixup() hook to the encoder
> > .mode_set() hook. Those always seems get called as a pair so
> > let's just stuff the pixel multiplier into the encoder itself
> > as there are no state objects we could use in this non-atomic
> > driver.
> > 
> > Paves the way for nuking mode->private_flag.
> Nice little clean-up. One comment below.
> 
> 	Sam
> > 
> > Cc: Patrik Jakobsson <patrik.r.jakobsson at gmail.com>
> > CC: Sam Ravnborg <sam at ravnborg.org>
> > Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
> > Cc: Emil Velikov <emil.l.velikov at gmail.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> >  drivers/gpu/drm/gma500/psb_intel_drv.h  | 19 -------------------
> >  drivers/gpu/drm/gma500/psb_intel_sdvo.c | 11 ++++++-----
> >  2 files changed, 6 insertions(+), 24 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h
> > index fb601983cef0..3dd5718c3e31 100644
> > --- a/drivers/gpu/drm/gma500/psb_intel_drv.h
> > +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h
> > @@ -56,25 +56,6 @@
> >  #define INTEL_OUTPUT_DISPLAYPORT 9
> >  #define INTEL_OUTPUT_EDP 10
> >  
> > -#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
> > -#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
> > -
> > -static inline void
> > -psb_intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
> > -				int multiplier)
> > -{
> > -	mode->clock *= multiplier;
> > -	mode->private_flags |= multiplier;
> > -}
> > -
> > -static inline int
> > -psb_intel_mode_get_pixel_multiplier(const struct drm_display_mode *mode)
> > -{
> > -	return (mode->private_flags & INTEL_MODE_PIXEL_MULTIPLIER_MASK)
> > -	       >> INTEL_MODE_PIXEL_MULTIPLIER_SHIFT;
> > -}
> > -
> > -
> >  /*
> >   * Hold information useally put on the device driver privates here,
> >   * since it needs to be shared across multiple of devices drivers privates.
> > diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> > index 264d7ad004b4..9e88a37f55e9 100644
> > --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> > +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> > @@ -132,6 +132,8 @@ struct psb_intel_sdvo {
> >  	/* DDC bus used by this SDVO encoder */
> >  	uint8_t ddc_bus;
> >  
> > +	u8 pixel_multiplier;
> > +
> 
> There is really no good reason to use an u8 here.

Wastes less space.

> psb_intel_sdvo_get_pixel_multiplier() return an int, so use an int here
> too.
> 
> With this fixed:
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> 
> >  	/* Input timings for adjusted_mode */
> >  	struct psb_intel_sdvo_dtd input_dtd;
> >  
> > @@ -958,7 +960,6 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> >  				  struct drm_display_mode *adjusted_mode)
> >  {
> >  	struct psb_intel_sdvo *psb_intel_sdvo = to_psb_intel_sdvo(encoder);
> > -	int multiplier;
> >  
> >  	/* We need to construct preferred input timings based on our
> >  	 * output timings.  To do that, we have to set the output
> > @@ -985,8 +986,9 @@ static bool psb_intel_sdvo_mode_fixup(struct drm_encoder *encoder,
> >  	/* Make the CRTC code factor in the SDVO pixel multiplier.  The
> >  	 * SDVO device will factor out the multiplier during mode_set.
> >  	 */
> > -	multiplier = psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> > -	psb_intel_mode_set_pixel_multiplier(adjusted_mode, multiplier);
> > +	psb_intel_sdvo->pixel_multiplier =
> > +		psb_intel_sdvo_get_pixel_multiplier(adjusted_mode);
> > +	adjusted_mode->clock *= psb_intel_sdvo->pixel_multiplier;
> >  
> >  	return true;
> >  }
> > @@ -1002,7 +1004,6 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
> >  	u32 sdvox;
> >  	struct psb_intel_sdvo_in_out_map in_out;
> >  	struct psb_intel_sdvo_dtd input_dtd;
> > -	int pixel_multiplier = psb_intel_mode_get_pixel_multiplier(adjusted_mode);
> >  	int rate;
> >  	int need_aux = IS_MRST(dev) ? 1 : 0;
> >  
> > @@ -1060,7 +1061,7 @@ static void psb_intel_sdvo_mode_set(struct drm_encoder *encoder,
> >  
> >  	(void) psb_intel_sdvo_set_input_timing(psb_intel_sdvo, &input_dtd);
> >  
> > -	switch (pixel_multiplier) {
> > +	switch (psb_intel_sdvo->pixel_multiplier) {
> >  	default:
> >  	case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break;
> >  	case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break;
> > -- 
> > 2.24.1
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel


More information about the Intel-gfx mailing list