[Intel-gfx] [PATCH v5 4/8] drm/i915/tc/icl: Implement TC cold sequences
José Roberto de Souza
jose.souza at intel.com
Tue Apr 14 19:49:52 UTC 2020
This is required for legacy/static TC ports as IOM is not aware of
the connection and will not trigger the TC cold exit.
Just request PCODE to exit TCCOLD is not enough as it could enter
again before driver makes use of the port, to prevent it BSpec states
that aux powerwell should be held.
So here embedding the TC cold exit sequence into ICL aux enable,
it will enable aux and then request TC cold to exit.
The TC cold block(exit and aux hold) and unblock was added to some
exported TC functions for the others and to access PHY registers,
callers should enable and keep aux powerwell enabled during access.
Also adding TC cold check and warnig in tc_port_load_fia_params() as
at this point of the driver initialization we can't request power
wells, if we get this warning we will need to figure out how to handle
it.
v2:
- moved ICL TC cold exit function to intel_display_power
- using dig_port->tc_legacy_port to only execute sequences for legacy
ports, hopefully VBTs will have this right
- fixed check to call _hsw_power_well_continue_enable()
- calling _hsw_power_well_continue_enable() unconditionally in
icl_tc_phy_aux_power_well_enable(), if needed we will surpress timeout
warnings of TC legacy ports
- only blocking TC cold around fia access
v3:
- added timeout of 5msec to not loop forever if
sandybridge_pcode_write_timeout() keeps returning -EAGAIN
returning -EAGAIN in in icl_tc_cold_exit()
- removed leftover tc_cold_wakeref
- added one msec sleep when PCODE returns -EAGAIN
v4:
- removed 5msec timeout, instead giving 1msec to whoever is using
PCODE to finish it up to 3 times
- added a comment about turn TC cold exit failure as a error in future
BSpec: 21750
Fixes: https://gitlab.freedesktop.org/drm/intel/issues/1296
Cc: Imre Deak <imre.deak at intel.com>
Cc: Cooper Chiou <cooper.chiou at intel.com>
Cc: Kai-Heng Feng <kai.heng.feng at canonical.com>
Reviewed-by: Imre Deak <imre.deak at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
.../drm/i915/display/intel_display_power.c | 25 +++++++-
drivers/gpu/drm/i915/display/intel_tc.c | 64 +++++++++++++++++--
drivers/gpu/drm/i915/i915_reg.h | 1 +
3 files changed, 83 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 5bef7dda4a7a..e2dddaf1051b 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -575,6 +575,28 @@ static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
#define TGL_AUX_PW_TO_TC_PORT(pw_idx) ((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1)
+static void icl_tc_cold_exit(struct drm_i915_private *i915)
+{
+ int ret, tries = 0;
+
+ while (1) {
+ ret = sandybridge_pcode_write_timeout(i915,
+ ICL_PCODE_EXIT_TCCOLD,
+ 0, 250, 1);
+ if (ret != -EAGAIN || ++tries == 3)
+ break;
+ msleep(1);
+ }
+
+ /* Spec states that TC cold exit can take up to 1ms to complete */
+ if (!ret)
+ msleep(1);
+
+ /* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */
+ drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" :
+ "succeeded");
+}
+
static void
icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
struct i915_power_well *power_well)
@@ -593,7 +615,8 @@ icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
hsw_power_well_enable_prepare(dev_priv, power_well);
- /* TODO ICL TC cold handling */
+ if (INTEL_GEN(dev_priv) == 11 && dig_port->tc_legacy_port)
+ icl_tc_cold_exit(dev_priv);
hsw_power_well_enable_complete(dev_priv, power_well);
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index 275618bedf32..0cf33d4d21c3 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -34,6 +34,7 @@ tc_port_load_fia_params(struct drm_i915_private *i915,
if (INTEL_INFO(i915)->display.has_modular_fia) {
modular_fia = intel_uncore_read(&i915->uncore,
PORT_TX_DFLEXDPSP(FIA1));
+ drm_WARN_ON(&i915->drm, modular_fia == 0xffffffff);
modular_fia &= MODULAR_FIA_MASK;
} else {
modular_fia = 0;
@@ -52,6 +53,37 @@ tc_port_load_fia_params(struct drm_i915_private *i915,
}
}
+static intel_wakeref_t
+tc_cold_block(struct intel_digital_port *dig_port)
+{
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+ enum intel_display_power_domain domain;
+
+ if (INTEL_GEN(i915) != 11 || !dig_port->tc_legacy_port)
+ return 0;
+
+ domain = intel_legacy_aux_to_power_domain(dig_port->aux_ch);
+ return intel_display_power_get(i915, domain);
+}
+
+static void
+tc_cold_unblock(struct intel_digital_port *dig_port, intel_wakeref_t wakeref)
+{
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+ enum intel_display_power_domain domain;
+
+ /*
+ * wakeref == -1, means some error happened saving save_depot_stack but
+ * power should still be put down and 0 is a invalid save_depot_stack
+ * id so can be used to skip it for non TC legacy ports.
+ */
+ if (wakeref == 0)
+ return;
+
+ domain = intel_legacy_aux_to_power_domain(dig_port->aux_ch);
+ intel_display_power_put_async(i915, domain, wakeref);
+}
+
u32 intel_tc_port_get_lane_mask(struct intel_digital_port *dig_port)
{
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
@@ -420,9 +452,14 @@ static void intel_tc_port_reset_mode(struct intel_digital_port *dig_port,
enum tc_port_mode old_tc_mode = dig_port->tc_mode;
intel_display_power_flush_work(i915);
- drm_WARN_ON(&i915->drm,
- intel_display_power_is_enabled(i915,
- intel_aux_power_domain(dig_port)));
+ if (INTEL_GEN(i915) != 11 || !dig_port->tc_legacy_port) {
+ enum intel_display_power_domain aux_domain;
+ bool aux_powered;
+
+ aux_domain = intel_aux_power_domain(dig_port);
+ aux_powered = intel_display_power_is_enabled(i915, aux_domain);
+ drm_WARN_ON(&i915->drm, aux_powered);
+ }
icl_tc_phy_disconnect(dig_port);
icl_tc_phy_connect(dig_port, required_lanes);
@@ -445,9 +482,11 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
{
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
struct intel_encoder *encoder = &dig_port->base;
+ intel_wakeref_t tc_cold_wref;
int active_links = 0;
mutex_lock(&dig_port->tc_lock);
+ tc_cold_wref = tc_cold_block(dig_port);
dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
if (dig_port->dp.is_mst)
@@ -473,6 +512,7 @@ void intel_tc_port_sanitize(struct intel_digital_port *dig_port)
dig_port->tc_port_name,
tc_port_mode_name(dig_port->tc_mode));
+ tc_cold_unblock(dig_port, tc_cold_wref);
mutex_unlock(&dig_port->tc_lock);
}
@@ -494,10 +534,15 @@ static bool intel_tc_port_needs_reset(struct intel_digital_port *dig_port)
bool intel_tc_port_connected(struct intel_digital_port *dig_port)
{
bool is_connected;
+ intel_wakeref_t tc_cold_wref;
intel_tc_port_lock(dig_port);
+ tc_cold_wref = tc_cold_block(dig_port);
+
is_connected = tc_port_live_status_mask(dig_port) &
BIT(dig_port->tc_mode);
+
+ tc_cold_unblock(dig_port, tc_cold_wref);
intel_tc_port_unlock(dig_port);
return is_connected;
@@ -513,9 +558,16 @@ static void __intel_tc_port_lock(struct intel_digital_port *dig_port,
mutex_lock(&dig_port->tc_lock);
- if (!dig_port->tc_link_refcount &&
- intel_tc_port_needs_reset(dig_port))
- intel_tc_port_reset_mode(dig_port, required_lanes);
+ if (!dig_port->tc_link_refcount) {
+ intel_wakeref_t tc_cold_wref;
+
+ tc_cold_wref = tc_cold_block(dig_port);
+
+ if (intel_tc_port_needs_reset(dig_port))
+ intel_tc_port_reset_mode(dig_port, required_lanes);
+
+ tc_cold_unblock(dig_port, tc_cold_wref);
+ }
drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref);
dig_port->tc_lock_wakeref = wakeref;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0b39b9abf8a4..e4667add70b0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -9108,6 +9108,7 @@ enum {
#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8))
#define GEN6_PCODE_READ_D_COMP 0x10
#define GEN6_PCODE_WRITE_D_COMP 0x11
+#define ICL_PCODE_EXIT_TCCOLD 0x12
#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17
#define DISPLAY_IPS_CONTROL 0x19
/* See also IPS_CTL */
--
2.26.0
More information about the Intel-gfx
mailing list