[Intel-gfx] [PATCH 1/3] drm/i915/display: Load DP_TP_CTL/STATUS offset before use it
José Roberto de Souza
jose.souza at intel.com
Tue Apr 14 23:04:40 UTC 2020
Right now dp.regs.dp_tp_ctl/status are only set during the encoder
pre_enable() hook, what is causing all reads and writes to those
registers to go to offset 0x0 before pre_enable() is executed.
So if i915 takes the BIOS state and don't do a modeset any following
link retraing will fail.
In the case that i915 needs to do a modeset, the DDI disable sequence
will write to a wrong register not disabling DP 'Transport Enable' in
DP_TP_CTL, making a HDMI modeset in the same port/transcoder to
not light up the monitor.
So here for GENs older than 12, that have those registers fixed at
port offset range it is loading at encoder/port init while for GEN12
it will keep setting it at encoder pre_enable() and during HW state
readout.
Fixes: 4444df6e205b ("drm/i915/tgl: move DP_TP_* to transcoder")
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Lucas De Marchi <lucas.demarchi at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
---
drivers/gpu/drm/i915/display/intel_ddi.c | 14 +++++++++++---
drivers/gpu/drm/i915/display/intel_dp.c | 5 ++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index be6c61bcbc9c..1aab93a94f40 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3252,9 +3252,6 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state,
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
crtc_state->lane_count, is_mst);
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
intel_edp_panel_on(intel_dp);
intel_ddi_clk_select(encoder, crtc_state);
@@ -4061,12 +4058,18 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
+ struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
u32 temp, flags = 0;
/* XXX: DSI transcoder paranoia */
if (drm_WARN_ON(&dev_priv->drm, transcoder_is_dsi(cpu_transcoder)))
return;
+ if (INTEL_GEN(dev_priv) >= 12) {
+ intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(cpu_transcoder);
+ intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(cpu_transcoder);
+ }
+
intel_dsc_get_config(encoder, pipe_config);
temp = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder));
@@ -4396,6 +4399,7 @@ static const struct drm_encoder_funcs intel_ddi_funcs = {
static struct intel_connector *
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
{
+ struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
struct intel_connector *connector;
enum port port = intel_dig_port->base.port;
@@ -4406,6 +4410,10 @@ intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_dig_port->dp.prepare_link_retrain =
intel_ddi_prepare_link_retrain;
+ if (INTEL_GEN(dev_priv) < 12) {
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
+ }
if (!intel_dp_init_connector(intel_dig_port, connector)) {
kfree(connector);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d4fcc9583869..03591ab76b0d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2671,9 +2671,6 @@ static void intel_dp_prepare(struct intel_encoder *encoder,
intel_crtc_has_type(pipe_config,
INTEL_OUTPUT_DP_MST));
- intel_dp->regs.dp_tp_ctl = DP_TP_CTL(port);
- intel_dp->regs.dp_tp_status = DP_TP_STATUS(port);
-
/*
* There are four kinds of DP registers:
*
@@ -8470,6 +8467,8 @@ bool intel_dp_init(struct drm_i915_private *dev_priv,
intel_dig_port->dp.output_reg = output_reg;
intel_dig_port->max_lanes = 4;
+ intel_dig_port->dp.regs.dp_tp_ctl = DP_TP_CTL(port);
+ intel_dig_port->dp.regs.dp_tp_status = DP_TP_STATUS(port);
intel_encoder->type = INTEL_OUTPUT_DP;
intel_encoder->power_domain = intel_port_to_power_domain(port);
--
2.26.0
More information about the Intel-gfx
mailing list