[Intel-gfx] [PATCH 1/5] drm/i915/selftests: Delay spinner before waiting for an interrupt
Chris Wilson
chris at chris-wilson.co.uk
Thu Apr 16 21:05:49 UTC 2020
It seems that although (perhaps because of the memory stall?) the
spinner has signaled that it has started, it still takes some time to
spin up to 100% utilisation of the HW. Since the test depends on the
full utilisation of the HW to trigger the RPS interrupt, wait a little
bit and flush the interrupt status to be sure that the event we see if
from the spinner.
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
drivers/gpu/drm/i915/gt/selftest_rps.c | 28 +++++++++++++++-----------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c b/drivers/gpu/drm/i915/gt/selftest_rps.c
index 26aadc2ae3be..199d608aa763 100644
--- a/drivers/gpu/drm/i915/gt/selftest_rps.c
+++ b/drivers/gpu/drm/i915/gt/selftest_rps.c
@@ -14,6 +14,20 @@ static void dummy_rps_work(struct work_struct *wrk)
{
}
+static void sleep_for_ei(struct intel_rps *rps, int timeout_us)
+{
+ /* Flush any previous EI */
+ usleep_range(timeout_us, 2 * timeout_us);
+
+ /* Reset the interrupt status */
+ rps_disable_interrupts(rps);
+ GEM_BUG_ON(rps->pm_iir);
+ rps_enable_interrupts(rps);
+
+ /* And then wait for the timeout, for real this time */
+ usleep_range(2 * timeout_us, 3 * timeout_us);
+}
+
static int __rps_up_interrupt(struct intel_rps *rps,
struct intel_engine_cs *engine,
struct igt_spinner *spin)
@@ -28,7 +42,6 @@ static int __rps_up_interrupt(struct intel_rps *rps,
intel_gt_pm_wait_for_idle(engine->gt);
GEM_BUG_ON(rps->active);
- rps->pm_iir = 0;
rps->cur_freq = rps->min_freq;
rq = igt_spinner_create_request(spin, engine->kernel_context, MI_NOOP);
@@ -71,7 +84,7 @@ static int __rps_up_interrupt(struct intel_rps *rps,
timeout = intel_uncore_read(uncore, GEN6_RP_UP_EI);
timeout = GT_PM_INTERVAL_TO_US(engine->i915, timeout);
- usleep_range(2 * timeout, 3 * timeout);
+ sleep_for_ei(rps, timeout);
GEM_BUG_ON(i915_request_completed(rq));
igt_spinner_end(spin);
@@ -122,16 +135,7 @@ static int __rps_down_interrupt(struct intel_rps *rps,
timeout = intel_uncore_read(uncore, GEN6_RP_DOWN_EI);
timeout = GT_PM_INTERVAL_TO_US(engine->i915, timeout);
- /* Flush any previous EI */
- usleep_range(timeout, 2 * timeout);
-
- /* Reset the interrupt status */
- rps_disable_interrupts(rps);
- GEM_BUG_ON(rps->pm_iir);
- rps_enable_interrupts(rps);
-
- /* And then wait for the timeout, for real this time */
- usleep_range(2 * timeout, 3 * timeout);
+ sleep_for_ei(rps, timeout);
if (rps->cur_freq != rps->max_freq) {
pr_err("%s: Frequency unexpectedly changed [down], now %d!\n",
--
2.20.1
More information about the Intel-gfx
mailing list