[Intel-gfx] [PATCH v1] drm/i915: Refactor setting dma info to a common helper
Ruhl, Michael J
michael.j.ruhl at intel.com
Fri Apr 17 19:31:52 UTC 2020
>-----Original Message-----
>From: Chris Wilson <chris at chris-wilson.co.uk>
>Sent: Friday, April 17, 2020 3:05 PM
>To: Ruhl, Michael J <michael.j.ruhl at intel.com>; intel-
>gfx at lists.freedesktop.org
>Subject: Re: [Intel-gfx] [PATCH v1] drm/i915: Refactor setting dma info to a
>common helper
>
>Quoting Michael J. Ruhl (2020-04-17 19:51:34)
>> DMA_MASK bit values are different for different generations.
>>
>> This will become more difficult to manage over time with the open
>> coded usage of different versions of the device.
>>
>> Fix by:
>> disallow setting of dma mask in AGP path (< GEN(5) for i915,
>> add dma_mask_size to the device info configuration,
>> updating open code call sequence to the latest interface,
>> refactoring into a common function for setting the dma segment
>> and mask info
>>
>> Signed-off-by: Michael J. Ruhl <michael.j.ruhl at intel.com>
>> cc: Brian Welty <brian.welty at intel.com>
>> cc: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
>>
>> ---
>> v1: removed i915 depenancy from agp path for dma mask
>> Consolidated segment size and work arounds to the helper
>> ---
>> drivers/char/agp/intel-gtt.c | 17 +++--
>> drivers/gpu/drm/i915/gt/intel_ggtt.c | 15 ----
>> drivers/gpu/drm/i915/i915_drv.c | 94 +++++++++++++++---------
>> drivers/gpu/drm/i915/i915_pci.c | 14 ++++
>> drivers/gpu/drm/i915/intel_device_info.c | 1 +
>> drivers/gpu/drm/i915/intel_device_info.h | 2 +
>> 6 files changed, 87 insertions(+), 56 deletions(-)
>>
>> diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
>> index 3d42fc4290bc..4b34a5195c65 100644
>> --- a/drivers/char/agp/intel-gtt.c
>> +++ b/drivers/char/agp/intel-gtt.c
>> @@ -1407,13 +1407,16 @@ int intel_gmch_probe(struct pci_dev
>*bridge_pdev, struct pci_dev *gpu_pdev,
>>
>> dev_info(&bridge_pdev->dev, "Intel %s Chipset\n",
>intel_gtt_chipsets[i].name);
>>
>> - mask = intel_private.driver->dma_mask_size;
>> - if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(mask)))
>> - dev_err(&intel_private.pcidev->dev,
>> - "set gfx device dma mask %d-bit failed!\n", mask);
>> - else
>> - pci_set_consistent_dma_mask(intel_private.pcidev,
>> - DMA_BIT_MASK(mask));
>> + if (bridge) {
>> + mask = intel_private.driver->dma_mask_size;
>> + if (pci_set_dma_mask(intel_private.pcidev,
>DMA_BIT_MASK(mask)))
>> + dev_err(&intel_private.pcidev->dev,
>> + "set gfx device dma mask %d-bit failed!\n",
>> + mask);
>> + else
>> + pci_set_consistent_dma_mask(intel_private.pcidev,
>> + DMA_BIT_MASK(mask));
>> + }
>
>This could even go under IS_ENABLED(CONFIG_AGP_INTEL)
I was going to, but then I was going to have to add:
#if IS_ENABLED(CONFIG_AGP_INTEL)
int mask;
#endif
as well...so I stopped while I was a ahead. If you would like the #if I will
add it.
>> +/**
>> + * i915_set_dma_info - set all relevant PCI dma info as configured for the
>> + * platform
>> + * @i915: valid i915 instance
>> + *
>> + * Set the dma max segment size, device and coherent masks. The dma
>mask set
>> + * needs to occur before i915_ggtt_probe_hw.
>> + *
>> + * A couple of platforms have special needs. Address them as well.
>> + *
>> + */
>> +static int i915_set_dma_info(struct drm_i915_private *i915)
>> +{
>> + struct pci_dev *pdev = i915->drm.pdev;
>> + unsigned int mask_size = INTEL_INFO(i915)->dma_mask_size;
>> + int ret;
>> +
>> + GEM_BUG_ON(!mask_size);
>> +
>> + /*
>> + * We don't have a max segment size, so set it to the max so sg's
>> + * debugging layer doesn't complain
>> + */
>> + dma_set_max_seg_size(&pdev->dev, UINT_MAX);
>> +
>> + ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(mask_size));
>> + if (ret)
>> + goto mask_err;
>> +
>> + /* overlay on gen2 is broken and can't address above 1G */
>> + if (IS_GEN(i915, 2))
>> + mask_size = 30;
>> +
>> + /*
>> + * 965GM sometimes incorrectly writes to hardware status page (HWS)
>> + * using 32bit addressing, overwriting memory if HWS is located
>> + * above 4GB.
>> + *
>> + * The documentation also mentions an issue with undefined
>> + * behaviour if any general state is accessed within a page above 4GB,
>> + * which also needs to be handled carefully.
>> + */
>> + if (IS_I965G(i915) || IS_I965GM(i915))
>> + mask_size = 32;
>> +
>> + ret = dma_set_coherent_mask(&pdev->dev,
>DMA_BIT_MASK(mask_size));
>> + if (ret)
>> + goto mask_err;
>
>This has captured all the old w/a knowledge in one spot, and we don't
>have the dma-mask spread over multiple files/locations.
>
>> +
>> + return 0;
>> +
>> +mask_err:
>> + drm_err(&i915->drm, "Can't set DMA mask/consistent mask (%d)\n",
>ret);
>> + return ret;
>
>And on later error we are fine not to cleanup the dma-mask, as
>pci_device takes care of that for us.
>
>> +}
>
>> @@ -685,6 +698,7 @@ static const struct intel_device_info skl_gt4_info = {
>> .has_logical_ring_contexts = 1, \
>> .has_logical_ring_preemption = 1, \
>> .has_gt_uc = 1, \
>> + .dma_mask_size = 39, \
>> .ppgtt_type = INTEL_PPGTT_FULL, \
>> .ppgtt_size = 48, \
>> .has_reset_engine = 1, \
>
>Diff making a hash of this file again, but they all looked correct.
>
>> diff --git a/drivers/gpu/drm/i915/intel_device_info.h
>b/drivers/gpu/drm/i915/intel_device_info.h
>> index cce6a72c5ebc..69c9257c6c6a 100644
>> --- a/drivers/gpu/drm/i915/intel_device_info.h
>> +++ b/drivers/gpu/drm/i915/intel_device_info.h
>> @@ -158,6 +158,8 @@ struct intel_device_info {
>>
>> enum intel_platform platform;
>>
>> + unsigned int dma_mask_size; /* available DMA address bits */
>
>One day we should pack this struct and see how much .data we can save.
Hmm, this value could be a u8. However, placement for optimal usage is a
bit more difficult...
I can update if you would like.
>Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
Thanks!
M
>-Chris
More information about the Intel-gfx
mailing list