[Intel-gfx] [PATCH 52/59] drm/arc: Initialize sim connector before display pipe

[Sam Ravnborg]

On Wed, Apr 15, 2020 at 09:40:27AM +0200, Daniel Vetter wrote:
> That way we can get rid of this final piece of init code, and use the
> simple pipe helpers as intended.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> Cc: Alexey Brodkin <abrodkin at synopsys.com>

One nit below, with this addressed:
Acked-by: Sam Ravnborg <sam at ravnborg.org>

> ---
>  drivers/gpu/drm/arc/arcpgu_drv.c | 51 ++++++++++----------------------
>  1 file changed, 16 insertions(+), 35 deletions(-)
> 
> diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
> index b0c941d91545..857812f25bec 100644
> --- a/drivers/gpu/drm/arc/arcpgu_drv.c
> +++ b/drivers/gpu/drm/arc/arcpgu_drv.c
> @@ -95,32 +95,11 @@ static const struct drm_connector_funcs arcpgu_drm_connector_funcs = {
>  	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>  };
>  
> -static int arcpgu_drm_sim_init(struct drm_device *drm, struct device_node *np)
> +static int arcpgu_drm_sim_init(struct drm_device *drm, struct drm_connector *connector)
>  {
> -	struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(drm);
> -	struct drm_encoder *encoder;
> -	struct drm_connector *connector;
> -	int ret;
> -
> -	encoder = &arcpgu->pipe.encoder;
> -
> -	connector = &arcpgu->sim_conn;
>  	drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs);
> -
> -	ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
> +	return drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
>  			DRM_MODE_CONNECTOR_VIRTUAL);

Please fix indent.

> -	if (ret < 0) {
> -		dev_err(drm->dev, "failed to initialize drm connector\n");
> -		return ret;
> -	}
> -
> -	ret = drm_connector_attach_encoder(connector, encoder);
> -	if (ret < 0) {
> -		dev_err(drm->dev, "could not attach connector to encoder\n");
> -		return ret;
> -	}
> -
> -	return 0;
>  }
>  
>  #define ENCODE_PGU_XY(x, y)	((((x) - 1) << 16) | ((y) - 1))
> @@ -273,6 +252,7 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
>  {
>  	struct platform_device *pdev = to_platform_device(arcpgu->drm.dev);
>  	struct device_node *encoder_node = NULL, *endpoint_node = NULL;
> +	struct drm_connector *connector = NULL;
>  	struct drm_device *drm = &arcpgu->drm;
>  	struct resource *res;
>  	int ret;
> @@ -307,13 +287,6 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
>  	if (dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)))
>  		return -ENODEV;
>  
> -	ret = drm_simple_display_pipe_init(drm, &arcpgu->pipe, &arc_pgu_pipe_funcs,
> -					   arc_pgu_supported_formats,
> -					   ARRAY_SIZE(arc_pgu_supported_formats),
> -					   NULL, NULL);
> -	if (ret)
> -		return ret;
> -
>  	/*
>  	 * There is only one output port inside each device. It is linked with
>  	 * encoder endpoint.
> @@ -322,8 +295,21 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
>  	if (endpoint_node) {
>  		encoder_node = of_graph_get_remote_port_parent(endpoint_node);
>  		of_node_put(endpoint_node);
> +	} else {
> +		connector = &arcpgu->sim_conn;
> +		dev_info(drm->dev, "no encoder found. Assumed virtual LCD on simulation platform\n");
> +		ret = arcpgu_drm_sim_init(drm, connector);
> +		if (ret < 0)
> +			return ret;
>  	}
>  
> +	ret = drm_simple_display_pipe_init(drm, &arcpgu->pipe, &arc_pgu_pipe_funcs,
> +					   arc_pgu_supported_formats,
> +					   ARRAY_SIZE(arc_pgu_supported_formats),
> +					   NULL, connector);
> +	if (ret)
> +		return ret;
> +
>  	if (encoder_node) {
>  		struct drm_bridge *bridge;
>  
> @@ -335,11 +321,6 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
>  		ret = drm_simple_display_pipe_attach_bridge(&arcpgu->pipe, bridge);
>  		if (ret)
>  			return ret;
> -	} else {
> -		dev_info(drm->dev, "no encoder found. Assumed virtual LCD on simulation platform\n");
> -		ret = arcpgu_drm_sim_init(drm, NULL);
> -		if (ret < 0)
> -			return ret;
>  	}
>  
>  	drm_mode_config_reset(drm);
> -- 
> 2.25.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel