[Intel-gfx] [PATCH 56/59] drm/aspeed: Use managed drmm_mode_config_cleanup

[Daniel Vetter]

On Fri, Apr 24, 2020 at 08:10:02PM +0200, Sam Ravnborg wrote:
> On Wed, Apr 15, 2020 at 09:40:31AM +0200, Daniel Vetter wrote:
> > Since aspeed doesn't use devm_kzalloc anymore we can use the managed
> > mode config cleanup.
> > 
> > Signed-off-by: Daniel Vetter <daniel.vetter at intel.com>
> > Cc: Joel Stanley <joel at jms.id.au>
> > Cc: Andrew Jeffery <andrew at aj.id.au>
> > Cc: linux-aspeed at lists.ozlabs.org
> > Cc: linux-arm-kernel at lists.infradead.org
> 
> Hmm, the helper function makes no sense, maybe embed it?
> 
> One Q below. Whith Q addressed:
> Acked-by: Sam Ravnborg <sam at ravnborg.org>
> 
> > ---
> >  drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 11 ++++++-----
> >  1 file changed, 6 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > index 6b27242b9ee3..6e464b84a256 100644
> > --- a/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_drv.c
> > @@ -63,15 +63,15 @@ static const struct drm_mode_config_funcs aspeed_gfx_mode_config_funcs = {
> >  	.atomic_commit		= drm_atomic_helper_commit,
> >  };
> >  
> > -static void aspeed_gfx_setup_mode_config(struct drm_device *drm)
> > +static int aspeed_gfx_setup_mode_config(struct drm_device *drm)
> >  {
> > -	drm_mode_config_init(drm);
> > -
> >  	drm->mode_config.min_width = 0;
> >  	drm->mode_config.min_height = 0;
> >  	drm->mode_config.max_width = 800;
> >  	drm->mode_config.max_height = 600;
> >  	drm->mode_config.funcs = &aspeed_gfx_mode_config_funcs;
> > +
> > +	return drmm_mode_config_init(drm);
> 
> I do not see anything that documents that it is OK to init min/max
> width/heigh not funcs before drmm_mode_config_init() is called.
> Maybe drmm_mode_config_init() gain an memset(drm->mode_config),
> and we loose all the assingments from before the call to init().
> 
> Also most (all?) other users of drmm_mode_config_init()
> set them after the call to drmm_mode_config_init().
> So re-order here and then embed while you are touching the code again.

Only reason I've done it like this is that it saves a few lines of diff
compared to other options.

Wrt calling stuff the wrong way round: We pretty much assume throughout
that structures are allocated with kzalloc, none of our _init() functions
in drm have a memset. We'd break the world if we start doing memset() in
random _init() functions I think.

Also the main aspeed_gfx_load() function is quite long already, smashing
more random stuff in there won't help it's readability.

Anyway I don't care, if you insist I'm happy to repaint this in whatever
color choice you deem best :-)

Cheers, Daniel

> 
> 	Sam
> 
> >  }
> >  
> >  static irqreturn_t aspeed_gfx_irq_handler(int irq, void *data)
> > @@ -144,7 +144,9 @@ static int aspeed_gfx_load(struct drm_device *drm)
> >  	writel(0, priv->base + CRT_CTRL1);
> >  	writel(0, priv->base + CRT_CTRL2);
> >  
> > -	aspeed_gfx_setup_mode_config(drm);
> > +	ret = aspeed_gfx_setup_mode_config(drm);
> > +	if (ret < 0)
> > +		return ret;
> >  
> >  	ret = drm_vblank_init(drm, 1);
> >  	if (ret < 0) {
> > @@ -181,7 +183,6 @@ static int aspeed_gfx_load(struct drm_device *drm)
> >  static void aspeed_gfx_unload(struct drm_device *drm)
> >  {
> >  	drm_kms_helper_poll_fini(drm);
> > -	drm_mode_config_cleanup(drm);
> >  }
> >  
> >  DEFINE_DRM_GEM_CMA_FOPS(fops);
> > -- 
> > 2.25.1
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch