[Intel-gfx] [RFC 13/20] drm/i915/dp: Extract drm_dp_downstream_read_info()

Lyude Paul lyude at redhat.com
Wed Aug 19 21:34:15 UTC 2020


(adding Ville and Imre to the cc here, they might be interested to know about
this, comments down below)

On Wed, 2020-08-19 at 11:15 -0400, Sean Paul wrote:
> On Tue, Aug 11, 2020 at 04:04:50PM -0400, Lyude Paul wrote:
> > We're going to be doing the same probing process in nouveau for
> > determining downstream DP port capabilities, so let's deduplicate the
> > work by moving i915's code for handling this into a shared helper:
> > drm_dp_downstream_read_info().
> > 
> > Note that when we do this, we also do make some functional changes while
> > we're at it:
> > * We always clear the downstream port info before trying to read it,
> >   just to make things easier for the caller
> > * We skip reading downstream port info if the DPCD indicates that we
> >   don't support downstream port info
> > * We only read as many bytes as needed for the reported number of
> >   downstream ports, no sense in reading the whole thing every time
> > 
> > Signed-off-by: Lyude Paul <lyude at redhat.com>
> > ---
> >  drivers/gpu/drm/drm_dp_helper.c         | 32 +++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/display/intel_dp.c | 14 ++---------
> >  include/drm/drm_dp_helper.h             |  3 +++
> >  3 files changed, 37 insertions(+), 12 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_dp_helper.c
> > b/drivers/gpu/drm/drm_dp_helper.c
> > index 4c21cf69dad5a..9703b33599c3b 100644
> > --- a/drivers/gpu/drm/drm_dp_helper.c
> > +++ b/drivers/gpu/drm/drm_dp_helper.c
> > @@ -423,6 +423,38 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux
> > *aux,
> >  }
> >  EXPORT_SYMBOL(drm_dp_send_real_edid_checksum);
> >  
> > +/**
> > + * drm_dp_downstream_read_info() - read DPCD downstream port info if
> > available
> > + * @aux: DisplayPort AUX channel
> > + * @dpcd: A cached copy of the port's DPCD
> > + * @downstream_ports: buffer to store the downstream port info in
> > + *
> > + * Returns: 0 if either the downstream port info was read successfully or
> > + * there was no downstream info to read, or a negative error code
> > otherwise.
> > + */
> > +int drm_dp_downstream_read_info(struct drm_dp_aux *aux,
> > +				const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > +				u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS])
> > +{
> > +	int ret;
> > +	u8 len;
> > +
> > +	memset(downstream_ports, 0, DP_MAX_DOWNSTREAM_PORTS);
> > +
> > +	/* No downstream info to read */
> > +	if (!drm_dp_is_branch(dpcd) ||
> > +	    dpcd[DP_DPCD_REV] < DP_DPCD_REV_10 ||
> > +	    !(dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT))
> > +		return 0;
> > +
> > +	len = (dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_PORT_COUNT_MASK) * 4;
> 
> I'm having a hard time rationalizing DP_MAX_DOWNSTREAM_PORTS being 16, but
> only
> having 4 ports worth of data in the DP_DOWNSTREAM_PORT_* registers. Do you
> know
> what's supposed to happen if dpcd[DP_DOWN_STREAM_PORT_COUNT] is > 4?
> 
ok!! Taking a lesson from our available_pbn/full_pbn confusion in the past, I
squinted very hard at the specification and eventually found something that I
think clears this up. Surprise - we definitely had this implemented incorrectly
in i915

>From section 5.3.3.1:

   Either one or four bytes are used, per DFP type indication. Therefore, up to
   16 (with 1-byte descriptor) or four (with 4-byte descriptor) DFP capabilities
   can be stored.

So, a couple takeaways from this:

 * A DisplayPort connector can have *multiple* different downstream port types,
   which I think actually makes sense as I've seen an adapter like this before.
 * We actually added the ability to determine the downstream port type for DP
   connectors using the subconnector prop, but it seems like if we want to aim
   for completeness we're going to need to come up with a new prop that can
   report multiple downstream port types :\.
 * It's not explicitly mentioned, but I'm assuming the correct way of handling
   multiple downstream BPC/pixel clock capabilities is to assume the max
   BPC/pixel clock is derived from the lowest max BPC/pixel clock we find on
   *connected* downstream ports (anything else wouldn't really make sense, imho)

So I'm going to rewrite this so we handle this properly in
drm_dp_downstream_read_info() and related helpers. I don't currently have the
time to do this, but if there's interest upstream in properly reporting the
downstream port types of DP ports in userspace someone might want to consider
coming up with another prop that accounts for multiple different downstream port
types.

> Sean
> 
> > +	ret = drm_dp_dpcd_read(aux, DP_DOWNSTREAM_PORT_0, downstream_ports,
> > +			       len);
> > +
> > +	return ret == len ? 0 : -EIO;
> > +}
> > +EXPORT_SYMBOL(drm_dp_downstream_read_info);
> > +
> >  /**
> >   * drm_dp_downstream_max_clock() - extract branch device max
> >   *                                 pixel rate for legacy VGA
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 1e29d3a012856..984e49194ca31 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -4685,18 +4685,8 @@ intel_dp_get_dpcd(struct intel_dp *intel_dp)
> >  			return false;
> >  	}
> >  
> > -	if (!drm_dp_is_branch(intel_dp->dpcd))
> > -		return true; /* native DP sink */
> > -
> > -	if (intel_dp->dpcd[DP_DPCD_REV] == 0x10)
> > -		return true; /* no per-port downstream info */
> > -
> > -	if (drm_dp_dpcd_read(&intel_dp->aux, DP_DOWNSTREAM_PORT_0,
> > -			     intel_dp->downstream_ports,
> > -			     DP_MAX_DOWNSTREAM_PORTS) < 0)
> > -		return false; /* downstream port status fetch failed */
> > -
> > -	return true;
> > +	return drm_dp_downstream_read_info(&intel_dp->aux, intel_dp->dpcd,
> > +					   intel_dp->downstream_ports) == 0;
> >  }
> >  
> >  static bool
> > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > index 5c28199248626..1349f16564ace 100644
> > --- a/include/drm/drm_dp_helper.h
> > +++ b/include/drm/drm_dp_helper.h
> > @@ -1613,6 +1613,9 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux
> > *aux,
> >  bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
> >  				    u8 real_edid_checksum);
> >  
> > +int drm_dp_downstream_read_info(struct drm_dp_aux *aux,
> > +				const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > +				u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS]);
> >  int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> >  				const u8 port_cap[4]);
> >  int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> > -- 
> > 2.26.2
> > 
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- 
Sincerely,
      Lyude Paul (she/her)
      Software Engineer at Red Hat



More information about the Intel-gfx mailing list