[Intel-gfx] [PATCH v2 2/3] drm/i915/display/ehl: Use EHL DP tables for eDP ports without low power support

Matt Roper matthew.d.roper at intel.com
Tue Aug 25 22:56:15 UTC 2020


On Tue, Aug 25, 2020 at 11:43:42AM -0700, José Roberto de Souza wrote:
> Reusing icl_get_combo_buf_trans() for eDP was causing the wrong table
> being used when the eDP port don't support low power voltage swing table.
> 
> v2: Only use icl_combo_phy_ddi_translations_edp_hbr3 if low_vswing is
> set as EHL combo phy supports HBR3 (Matt R)
> 
> Cc: Lee Shawn C <shawn.c.lee at intel.com>
> Cc: Khaled Almahallawy <khaled.almahallawy at intel.com>
> Cc: Matt Roper <matthew.d.roper at intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza at intel.com>

Reviewed-by: Matt Roper <matthew.d.roper at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 22 +++++++++++++++++++---
>  1 file changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 9a035bb7bd06..699511872290 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -1074,12 +1074,28 @@ static const struct cnl_ddi_buf_trans *
>  ehl_get_combo_buf_trans(struct intel_encoder *encoder, int type, int rate,
>  			int *n_entries)
>  {
> -	if (type != INTEL_OUTPUT_HDMI && type != INTEL_OUTPUT_EDP) {
> +	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +
> +	switch (type) {
> +	case INTEL_OUTPUT_HDMI:
> +		*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
> +		return icl_combo_phy_ddi_translations_hdmi;
> +	case INTEL_OUTPUT_EDP:
> +		if (dev_priv->vbt.edp.low_vswing) {
> +			if (rate > 540000) {
> +				*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
> +				return icl_combo_phy_ddi_translations_edp_hbr3;
> +			} else {
> +				*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr2);
> +				return icl_combo_phy_ddi_translations_edp_hbr2;
> +			}
> +		}
> +		/* fall through */
> +	default:
> +		/* All combo DP and eDP ports that do not support low_vswing */
>  		*n_entries = ARRAY_SIZE(ehl_combo_phy_ddi_translations_dp);
>  		return ehl_combo_phy_ddi_translations_dp;
>  	}
> -
> -	return icl_get_combo_buf_trans(encoder, type, rate, n_entries);
>  }
>  
>  static const struct cnl_ddi_buf_trans *
> -- 
> 2.28.0
> 

-- 
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795


More information about the Intel-gfx mailing list