[Intel-gfx] [PATCH v8 11/17] pwm: crc: Enable/disable PWM output on enable/disable

[Thierry Reding]

On Sun, Aug 30, 2020 at 02:57:47PM +0200, Hans de Goede wrote:
> The pwm-crc code is using 2 different enable bits:
> 1. bit 7 of the PWM0_CLK_DIV (PWM_OUTPUT_ENABLE)
> 2. bit 0 of the BACKLIGHT_EN register
> 
> So far we've kept the PWM_OUTPUT_ENABLE bit set when disabling the PWM,
> this commit makes crc_pwm_disable() clear it on disable and makes
> crc_pwm_enable() set it again on re-enable.
> 
> Acked-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> Changes in v3:
> - Remove paragraph about tri-stating the output from the commit message,
>   we don't have a datasheet so this was just an unfounded guess
> ---
>  drivers/pwm/pwm-crc.c | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Thierry Reding <thierry.reding at gmail.com>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20200831/ad09ce53/attachment-0001.sig>